FCC ID YETQ34-2121466CU
Provider-Specific Consumer Signal Booster
by Nextivity Incorporated
Grantee Code: YET Product Code: Q342121466CU
Latest application date: 2020-11-17
FCC ID Device Details
| FCC ID | YETQ34-2121466CU |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | YET |
| Product Code | Q342121466CU |
| Applicant Business | Nextivity Incorporated 🇺🇸 |
| Related Domains |  nextivityinc.com |
| Equipment Class | Provider-Specific Consumer Signal Booster |
| Test Firm | TUV SUD America Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 729-746 MHz | Original Equipment | 2020-11-17 |
| 758-768 MHz | Original Equipment | 2020-11-17 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual I | Users Manual | 2021-04-15 | PDF 223.9 KB |
| User Manual II | Users Manual | 2021-04-15 | PDF 1.7 MB |
| Internal Photos | Internal Photos | 2021-04-15 | PDF 1.1 MB |
| External Photos | External Photos | 2021-04-15 | PDF 511.7 KB |
| Label and Label Location | ID Label/Location Info | 2020-11-17 | PDF 301.6 KB |
| Test Setup Photos | Test Setup Photos | 2021-04-15 | PDF 1.3 MB |
| RF Exposure Report | RF Exposure Info | 2020-11-17 | PDF 1.3 MB |
| Part 24/27 Test Report 1 | Test Report | 2020-11-17 | PDF 5.7 MB |
| Part 24/27 Test Report 2 | Test Report | 2020-11-17 | PDF 5.4 MB |
| Part 24/27 Test Report 3 | Test Report | 2020-11-17 | PDF 5.8 MB |
| Part 90 Test Report Part 1 | Test Report | 2020-11-17 | PDF 5.1 MB |
| Part 90 Test Report Part 2 | Test Report | 2020-11-17 | PDF 2.6 MB |
| Agents Letter | Cover Letter(s) | 2020-11-17 | PDF 26 KB |
| Confidentiality Letter | Cover Letter(s) | 2020-11-17 | PDF 161.3 KB |
| MPE Letter | RF Exposure Info | 2020-11-17 | PDF 83.1 KB |
| MPE Report | RF Exposure Info | 2020-11-17 | PDF 83.1 KB |
| Block Diagram Metadata only | Block Diagram | PDF 394.2 KB | |
| Schematics Metadata only | Schematics | PDF 409.5 KB | |
| Operating Description Metadata only | Operational Description | PDF 1.1 MB | |
| Part List Metadata only | Parts List/Tune Up Info | PDF 169.2 KB | |
| Tune Up Metadata only | Parts List/Tune Up Info | PDF 148.8 KB |
Application Information
| Application ID | kUcpIZrFQFR+YuDXlMb5vw== |
|---|---|
| Final Action Date | 2020-11-17 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0019823665 |
| Model | Q34-2121466CU |
| Frequency Range | 729-746 MHz |
| Equipment Class | B2I - Part 20 Industrial Booster (CMRS) |
| Device Description | Provider-Specific Consumer Signal Booster |
| Responsible Party | Michiel Lotter, Vice President, Engineering, mlotter@nextivityinc.com , 858-485-9442 |
| Test Firm | Mac Elliott, TUV SUD America Inc., William.Elliott@tuvsud.com  , 813-284-2736 |
| TCB Email | andy.zhang@tuvsud.com |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27 |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 04/15/2021 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is ERP for frequencies below 1 GHz and EIRP for frequencies above 1 GHz. This device operates only with a device with FCC ID: YETQ34-2121466NU. The intended use is for industrial/commercial use and will not be sold to the general public. Professional installation is required. This in-building DAS booster system device shall be operated with frequency selection by network identification and interference avoidance for wireless subsystems as described in this filing. The antennas used with this signal booster must be installed to provide a separation distance of at least 20 cm from all persons. Users and installers must be provided with the antenna kitting and installation instructions and operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| kUcpIZrFQFR+YuDXlMb5vw== | 2020-11-17 | Original Equipment |
| RmV3FyI3736S+l9wlOTuPQ== | 2020-11-17 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application RmV3FyI3736S+l9wlOTuPQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 11/17/2020 Application Dated: 11/17/2020 |
| Nextivity Incorporated |
| 16550 West Bernardo Drive, Bldg 5, Suite 550 |
| San Diego, CA 92127 |
| Attention: Michiel Lotter , Vice President, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YETQ34-2121466CU |
| Name of Grantee: | Nextivity Incorporated |
| Equipment Class: | Part 90 Class B Industrial Booster (non-SMR) |
| Notes: | Provider-Specific Consumer Signal Booster |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 758.0 - 768.0 | 0.12 | Amp | F9W |
| Output power listed is ERP. This device operates only with a device with FCC ID: YETQ34-2121466NU. The intended use is for industrial/commercial use and will not be sold to the general public. Professional installation is required. This in-building DAS booster system device shall be operated with frequency selection by network identification and interference avoidance for wireless subsystems as described in this filing. The antennas used with this signal booster must be installed to provide a separation distance of at least 20 cm from all persons. Users and installers must be provided with the antenna kitting and installation instructions and operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application RmV3FyI3736S+l9wlOTuPQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nextivity Incorporated 16550 West Bernardo Drive, Bldg 5, Suite 550 San Diego, CA 92127 United States |
Date of Grant: 11/17/2020 Application Dated: 11/17/2020 |
| Attention: Michiel Lotter , Vice President, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YETQ34-2121466CU |
| Name of Grantee: | Nextivity Incorporated |
| Equipment Class: | Part 90 Class B Industrial Booster (non-SMR) |
| Notes: | Provider-Specific Consumer Signal Booster |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 90 | 758.0 - 768.0 | 0.12 | Amp | F9W |
| Output power listed is ERP. This device operates only with a device with FCC ID: YETQ34-2121466NU. The intended use is for industrial/commercial use and will not be sold to the general public. Professional installation is required. This in-building DAS booster system device shall be operated with frequency selection by network identification and interference avoidance for wireless subsystems as described in this filing. The antennas used with this signal booster must be installed to provide a separation distance of at least 20 cm from all persons. Users and installers must be provided with the antenna kitting and installation instructions and operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD America Inc. 401 Edgewater Place Suite #500 Wakefield, MA 01880 |
Date of Grant: 11/17/2020 Application Dated: 11/17/2020 |
| Nextivity Incorporated |
| 16550 West Bernardo Drive, Bldg 5, Suite 550 |
| San Diego, CA 92127 |
| Attention: Michiel Lotter , Vice President, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YETQ34-2121466CU |
| Name of Grantee: | Nextivity Incorporated |
| Equipment Class: | Part 20 Industrial Booster (CMRS) |
| Notes: | Provider-Specific Consumer Signal Booster |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 27 | 729.0 - 746.0 | 0.11 | Amp | F9W | |
| 24E | 1930.0 - 1990.0 | 0.75 | Amp | F9W | |
| 27 | 2110.0 - 2155.0 | 0.7 | Amp | F9W |
| Output power listed is ERP for frequencies below 1 GHz and EIRP for frequencies above 1 GHz. This device operates only with a device with FCC ID: YETQ34-2121466NU. The intended use is for industrial/commercial use and will not be sold to the general public. Professional installation is required. This in-building DAS booster system device shall be operated with frequency selection by network identification and interference avoidance for wireless subsystems as described in this filing. The antennas used with this signal booster must be installed to provide a separation distance of at least 20 cm from all persons. Users and installers must be provided with the antenna kitting and installation instructions and operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application kUcpIZrFQFR+YuDXlMb5vw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nextivity Incorporated 16550 West Bernardo Drive, Bldg 5, Suite 550 San Diego, CA 92127 United States |
Date of Grant: 11/17/2020 Application Dated: 11/17/2020 |
| Attention: Michiel Lotter , Vice President, Engineering |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YETQ34-2121466CU |
| Name of Grantee: | Nextivity Incorporated |
| Equipment Class: | Part 20 Industrial Booster (CMRS) |
| Notes: | Provider-Specific Consumer Signal Booster |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 27 | 729.0 - 746.0 | 0.11 | Amp | F9W | |
| 24E | 1930.0 - 1990.0 | 0.75 | Amp | F9W | |
| 27 | 2110.0 - 2155.0 | 0.7 | Amp | F9W |
| Output power listed is ERP for frequencies below 1 GHz and EIRP for frequencies above 1 GHz. This device operates only with a device with FCC ID: YETQ34-2121466NU. The intended use is for industrial/commercial use and will not be sold to the general public. Professional installation is required. This in-building DAS booster system device shall be operated with frequency selection by network identification and interference avoidance for wireless subsystems as described in this filing. The antennas used with this signal booster must be installed to provide a separation distance of at least 20 cm from all persons. Users and installers must be provided with the antenna kitting and installation instructions and operating conditions for satisfying RF exposure compliance. |
| Mail To: |