FCC ID YG7RF31100M

Full HD Video Wireless Transmitter Module

by Zinwell Corporation

Grantee Code: YG7   Product Code: RF31100M
Latest application date: 2010-10-26

FCC ID Device Details

FCC IDYG7RF31100M
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeYG7
Product CodeRF31100M
Applicant BusinessZinwell Corporation 🇹🇼
Related Domains zinwell.com.tw
Equipment ClassFull HD Video Wireless Transmitter Module
Test FirmQuietek Linkou EMC Labotorty

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5755-5795 MHzOriginal Equipment2010-10-26
5190-5230 MHzOriginal Equipment2010-10-26

Exhibits

DocumentTypeAvailableFile
(RF31100M) UserMan_20101025Users Manual2010-10-26PDF 1.6 MB
(RF31100M) InphoInternal Photos2010-10-26PDF 1.3 MB
(RF31100M) ExphoExternal Photos2010-10-26PDF 232.3 KB
(RF31100M) LableLocID Label/Location Info2010-10-26PDF 193.7 KB
(RF31100M) LablesmplID Label/Location Info2010-10-26PDF 193.7 KB
(RF31100M) OPDes_Part 15COperational Description2010-10-26PDF 33.9 KB
(RF31100M) OPDes_Part 15EOperational Description2010-10-26PDF 33.8 KB
(RF31100M) TsupTest Setup Photos2010-10-26PDF 335 KB
(RF31100M) TestRpt_Part 15CTest Report2010-10-26PDF 339.3 KB
(RF31100M) TestRpt_Part 15ETest Report2010-10-26PDF 445.7 KB
(RF31100M) ATTESTATIONAttestation Statements2010-10-26PDF 47.9 KB
(RF31100M) DoC LetterAttestation Statements2010-10-26PDF 59.6 KB
(RF31100M) FCC Modular Approval RequestAttestation Statements2010-10-26PDF 92 KB
(RF31100M) ConfidentialityCover Letter(s)2010-10-26PDF 74.6 KB
(RF31100M) Declaration of authorizationCover Letter(s)2010-10-26PDF 55 KB
(RF31100M) RFExpRF Exposure Info2010-10-26PDF 37 KB

Application Information

Application IDltx79YmQlEmRS1WLe3ArPg==
Final Action Date2010-10-26
Application PurposeOriginal Equipment
Applicant FRN0019851922
ModelRF31100M
Frequency Range5755-5795 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionFull HD Video Wireless Transmitter Module
Responsible PartyGary Tsai, Senior Manager, tph@zinwell.com.tw , 886-2-22251929
Technical ContactSabina Chen, QuieTek Corporation, sabinachen@quietek.com , 886-2-8601-3788
Test FirmJames Chang, Quietek Linkou EMC Labotorty, jameschang@quietek.com , 886-2-8792-6808
TCB Emailhotline@atcb.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is Conducted power. Singlel Modular approval. This module is approved for use in RF category Mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module must not be given to the end user. Only those antennas tested with the device or similar type antennas with same or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of 20cm from all persons and musty not be co-located with any other antenna or transmitter. End users must be provided with operating and installation instructions to ensure RF exposure compliance.

Applications

Application IDDatePurpose
ltx79YmQlEmRS1WLe3ArPg==2010-10-26Original Equipment
/UmMhQ6hZfd3BA/Y/WUqBg==2010-10-26Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
5190-5230 MHz0.015000015ECC
5755-5795 MHz0.150000015CCC

Grants

TCB Grant - Application ltx79YmQlEmRS1WLe3ArPg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 10/26/2010

Application Dated: 10/24/2010
Zinwell Corporation
7F., No.512, Yuanshan Rd., Zhonghe Dist.,
New Taipei City 235, Taiwan (R.O.C.)
Taipei,
Taiwan
 
Attention: Gary Tsai , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YG7RF31100M
Name of Grantee:  Zinwell Corporation
Equipment Class: Digital Transmission System
Notes: Full HD Video Wireless Transmitter Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 5755.0  -  5795.0 0.15  

Power Output listed is Conducted power. Singlel Modular approval. This module is approved for use in RF category Mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module must not be given to the end user. Only those antennas tested with the device or similar type antennas with same or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of 20cm from all persons and musty not be co-located with any other antenna or transmitter. End users must be provided with operating and installation instructions to ensure RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ltx79YmQlEmRS1WLe3ArPg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zinwell Corporation
7F., No.512, Yuanshan Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C.)
Taipei,
Taiwan
  Date of Grant: 10/26/2010

Application Dated: 10/24/2010
 
Attention: Gary Tsai , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YG7RF31100M
Name of Grantee:  Zinwell Corporation
Equipment Class: Digital Transmission System
Notes: Full HD Video Wireless Transmitter Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 5755.0  -  5795.0 0.15  

Power Output listed is Conducted power. Singlel Modular approval. This module is approved for use in RF category Mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module must not be given to the end user. Only those antennas tested with the device or similar type antennas with same or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of 20cm from all persons and musty not be co-located with any other antenna or transmitter. End users must be provided with operating and installation instructions to ensure RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application /UmMhQ6hZfd3BA/Y/WUqBg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 10/26/2010

Application Dated: 10/24/2010
Zinwell Corporation
7F., No.512, Yuanshan Rd., Zhonghe Dist.,
New Taipei City 235, Taiwan (R.O.C.)
Taipei,
Taiwan
 
Attention: Gary Tsai , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YG7RF31100M
Name of Grantee:  Zinwell Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Full HD Video Wireless Transmitter Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5190.0  -  5230.0 0.015  

Power Output listed is Conducted power. Singlel Modular approval. This module is approved for use in RF category Mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module must not be given to the end user. Only those antennas tested with the device or similar type antennas with same or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of 20cm from all persons and musty not be co-located with any other antenna or transmitter. This device is restricted to indoor only operations within the 5150-5250 MHz band. End users must be provided with operating and installation instructions to ensure RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application /UmMhQ6hZfd3BA/Y/WUqBg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zinwell Corporation
7F., No.512, Yuanshan Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C.)
Taipei,
Taiwan
  Date of Grant: 10/26/2010

Application Dated: 10/24/2010
 
Attention: Gary Tsai , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YG7RF31100M
Name of Grantee:  Zinwell Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Full HD Video Wireless Transmitter Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5190.0  -  5230.0 0.015  

Power Output listed is Conducted power. Singlel Modular approval. This module is approved for use in RF category Mobile configurations. This module must be installed by the OEM or OEM integrator. Instructions for installation of this module must not be given to the end user. Only those antennas tested with the device or similar type antennas with same or lesser gain may be used with this transmitter. The antenna used for this transmitter must be installed to provide a separation distance of 20cm from all persons and musty not be co-located with any other antenna or transmitter. This device is restricted to indoor only operations within the 5150-5250 MHz band. End users must be provided with operating and installation instructions to ensure RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: