FCC ID YG7ZRF31100F

Full HD Video Wireless Transmitter Module

by Zinwell Corporation

Grantee Code: YG7   Product Code: ZRF31100F
Latest application date: 2010-12-09

FCC ID Device Details

FCC IDYG7ZRF31100F
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeYG7
Product CodeZRF31100F
Applicant BusinessZinwell Corporation 🇹🇼
Related Domains zinwell.com.tw
Equipment ClassFull HD Video Wireless Transmitter Module
Test FirmQuietek Linkou EMC Labotorty

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2010-12-09
5745-5825 MHzOriginal Equipment2010-12-09

Exhibits

DocumentTypeAvailableFile
(ZRF-31100F) UserMan_20101206Users Manual2010-12-09PDF 534 KB
(ZRF-31100F) InphoInternal Photos2010-12-09PDF 788.6 KB
(ZRF-31100F) ExphoExternal Photos2010-12-09PDF 207.2 KB
(ZRF-31100F) LabelLocID Label/Location Info2010-12-09PDF 136.4 KB
(ZRF-31100F) LabelsmplID Label/Location Info2010-12-09PDF 136.4 KB
(ZRF-31100F) OPDes_Part 15COperational Description2010-12-09PDF 34.1 KB
(ZRF-31100F) OPDes_Part 15EOperational Description2010-12-09PDF 34.1 KB
(ZRF-31100F) TsupTest Setup Photos2010-12-09PDF 298.6 KB
(ZRF-31100F) TestRpt_Part 15CTest Report2010-12-09PDF 2.2 MB
(ZRF-31100F) TestRpt_Part 15ETest Report2010-12-09PDF 2.7 MB
(ZRF-31100F) ATTESTATIONAttestation Statements2010-12-09PDF 50.1 KB
(ZRF-31100F) DoC LetterAttestation Statements2010-12-09PDF 61.1 KB
(ZRF-31100F) FCC Modular Approval RequestAttestation Statements2010-12-09PDF 12.9 KB
(ZRF-31100F) ConfidentialityCover Letter(s)2010-12-09PDF 78.1 KB
(ZRF-31100F) Declaration of authorizationCover Letter(s)2010-12-09PDF 58 KB
(ZRF-31100F) RFExp_20101206RF Exposure Info2010-12-09PDF 38 KB

Application Information

Application IDuJG6qO+WunByp5VVHUcfZg==
Final Action Date2010-12-09
Application PurposeOriginal Equipment
Applicant FRN0019851922
ModelZRF31100F
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionFull HD Video Wireless Transmitter Module
Responsible PartyGary Tsai, Senior Manager, tph@zinwell.com.tw , 886-2-22251929
Technical ContactSabina Chen, QuieTek Corporation, sabinachen@quietek.com , 886-2-8601-3788
Test FirmJames Chang, Quietek Linkou EMC Labotorty, jameschang@quietek.com , 886-2-8792-6808
TCB Emailhotline@atcb.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
uJG6qO+WunByp5VVHUcfZg==2010-12-09Original Equipment
MpKPh7ir8RB49wqoY7P+Qg==2010-12-09Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
5180-5240 MHz0.04315ECC
5190-5230 MHz0.04115ECC
5745-5825 MHz0.517615CCC
5755-5795 MHz0.441515CCC

Grants

TCB Grant - Application uJG6qO+WunByp5VVHUcfZg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 12/09/2010

Application Dated: 12/06/2010
Zinwell Corporation
7F., No.512, Yuanshan Rd., Zhonghe Dist.,
New Taipei City 235, Taiwan (R.O.C.)
Taipei,
Taiwan
 
Attention: Gary Tsai , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YG7ZRF31100F
Name of Grantee:  Zinwell Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Full HD Video Wireless Transmitter Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.043  
CC 15E 5190.0  -  5230.0 0.041  

Single Modular Approval. Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application uJG6qO+WunByp5VVHUcfZg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zinwell Corporation
7F., No.512, Yuanshan Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C.)
Taipei,
Taiwan
  Date of Grant: 12/09/2010

Application Dated: 12/06/2010
 
Attention: Gary Tsai , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YG7ZRF31100F
Name of Grantee:  Zinwell Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Full HD Video Wireless Transmitter Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.043  
CC 15E 5190.0  -  5230.0 0.041  

Single Modular Approval. Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This transmitter is restricted to indoor use only within the 5.15-5.25GHz band. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application MpKPh7ir8RB49wqoY7P+Qg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 12/09/2010

Application Dated: 12/06/2010
Zinwell Corporation
7F., No.512, Yuanshan Rd., Zhonghe Dist.,
New Taipei City 235, Taiwan (R.O.C.)
Taipei,
Taiwan
 
Attention: Gary Tsai , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YG7ZRF31100F
Name of Grantee:  Zinwell Corporation
Equipment Class: Digital Transmission System
Notes: Full HD Video Wireless Transmitter Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 5745.0  -  5825.0 0.5176  
CC 15C 5755.0  -  5795.0 0.4415  

Single Modular Approval. Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application MpKPh7ir8RB49wqoY7P+Qg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Zinwell Corporation
7F., No.512, Yuanshan Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C.)
Taipei,
Taiwan
  Date of Grant: 12/09/2010

Application Dated: 12/06/2010
 
Attention: Gary Tsai , Senior Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YG7ZRF31100F
Name of Grantee:  Zinwell Corporation
Equipment Class: Digital Transmission System
Notes: Full HD Video Wireless Transmitter Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 5745.0  -  5825.0 0.5176  
CC 15C 5755.0  -  5795.0 0.4415  

Single Modular Approval. Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: