FCC ID YGP5000-01
RF ID Tracking System
by Crown Equipment Corporation
Grantee Code: YGP Product Code: 500001
Latest application date: 2017-05-14
Device Images
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.75-927.25 MHz | Class II permissive change or modification of presently authorized equipment | 2017-05-14 |
| 902.75-927.25 MHz | Original Equipment | 2015-11-09 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User documentation | Users Manual | 2017-05-14 | PDF 974.7 KB |
| RFID Installation Guide | Users Manual | 2015-11-09 | PDF 771.6 KB |
| User Manual_system | Users Manual | 2015-11-09 | PDF 876.5 KB |
| Internal Photos | Internal Photos | 2017-05-14 | PDF 3.2 MB |
| Antenna Photos | Internal Photos | 2015-11-09 | PDF 710.9 KB |
| Internal Photos | Internal Photos | 2015-11-09 | PDF 1.1 MB |
| External Photos | External Photos | 2017-05-14 | PDF 2 MB |
| External Photos | External Photos | 2015-11-09 | PDF 411 KB |
| Label | ID Label/Location Info | 2017-05-14 | PDF 58.3 KB |
| Label Location | ID Label/Location Info | 2015-11-09 | PDF 475.2 KB |
| Test Setup Photos | Test Setup Photos | 2017-05-14 | PDF 163 KB |
| Test Setup Photos | Test Setup Photos | 2015-11-09 | PDF 836.5 KB |
| Report | Test Report | 2017-05-14 | PDF 773.1 KB |
| FCC Report | Test Report | 2015-11-09 | PDF 2.9 MB |
| Agent Authorization | Cover Letter(s) | 2017-05-14 | PDF 575.7 KB |
| C2PC letter | Cover Letter(s) | 2017-05-14 | PDF 582.8 KB |
| Confidentiality Request | Cover Letter(s) | 2017-05-14 | PDF 470.1 KB |
| Agent Authorization | Cover Letter(s) | 2015-11-09 | PDF 383 KB |
| Request for Confidentiality | Cover Letter(s) | 2015-11-09 | PDF 200.9 KB |
| profesional install | Cover Letter(s) | 2015-11-09 | PDF 95 KB |
| MPE Report | RF Exposure Info | 2017-05-14 | PDF 238.1 KB |
| MPE Report | RF Exposure Info | 2015-11-09 | PDF 351.3 KB |
| Block Diagram with Oscillators Metadata only | Block Diagram | PDF 195.9 KB | |
| Block Diagrams Metadata only | Block Diagram | PDF 108.7 KB | |
| HD5000 Block Diagram Metadata only | Block Diagram | PDF 125.3 KB | |
| block diagram RFID Metadata only | Block Diagram | PDF 198.7 KB | |
| SCHEMATIC control Metadata only | Schematics | PDF 1.2 MB | |
| SCHEMATIC rfid Metadata only | Schematics | PDF 663.9 KB | |
| Schematics Metadata only | Schematics | PDF 1.9 MB | |
| Antennna General Spec Metadata only | Operational Description | PDF 209.5 KB | |
| General Specifications antenna Metadata only | Operational Description | PDF 714.9 KB | |
| Operational Description Metadata only | Operational Description | PDF 284.1 KB |
Application Information
| Application ID | m7Ha9ueR5bipzpFxWGmZ3Q== |
|---|---|
| Final Action Date | 2017-05-14 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019874486 |
| Model | 5000-01 |
| Frequency Range | 902.75-927.25 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | RF ID Tracking System |
| Responsible Party | Ronald L Ziegler, Director Test & Compliance, ron.ziegler@crown.com  , 4196292311 |
| Test Firm | Rick Titus, UL LLC, rick.a.titus@ul.com  , 847-272-8800 |
| TCB Email | LST.FRE.CertNotice@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change filing as documented in this filing. Output power listed is conducted by total power of the same channel of two antennas. This device may be installed by Crown Equipment Corporation or authorized installer. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 45 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. OEM integrators and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| m7Ha9ueR5bipzpFxWGmZ3Q== | 2017-05-14 | Class II permissive change or modification of presently authorized equipment |
| M3lFox/eKQ8rOyUtble42g== | 2015-11-09 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 902.75-927.25 MHz | 0.9440600 | 15C |
Grants
TCB Grant - Application m7Ha9ueR5bipzpFxWGmZ3Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 05/14/2017 Application Dated: 05/14/2017 |
| Crown Equipment Corporation |
| 44 South Washington Street |
| New Bremen, OH 45869 |
| Attention: Ronald Ziegler , Director Test & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YGP5000-01 |
| Name of Grantee: | Crown Equipment Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RF ID Tracking System |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.94406 |
| Class II permissive change filing as documented in this filing. Output power listed is conducted by total power of the same channel of two antennas. This device may be installed by Crown Equipment Corporation or authorized installer. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 45 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. OEM integrators and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application m7Ha9ueR5bipzpFxWGmZ3Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Crown Equipment Corporation 44 South Washington Street New Bremen, OH 45869 United States |
Date of Grant: 05/14/2017 Application Dated: 05/14/2017 |
| Attention: Ronald Ziegler , Director Test & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YGP5000-01 |
| Name of Grantee: | Crown Equipment Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RF ID Tracking System |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.94406 |
| Class II permissive change filing as documented in this filing. Output power listed is conducted by total power of the same channel of two antennas. This device may be installed by Crown Equipment Corporation or authorized installer. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 45 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. OEM integrators and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. (formerly UL CCS) 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 11/09/2015 Application Dated: 11/09/2015 |
| Crown Equipment Corporation |
| 44 South Washington Street |
| New Bremen, OH 45869 |
| Attention: Ronald Ziegler , Director Test & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YGP5000-01 |
| Name of Grantee: | Crown Equipment Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RF ID Tracking System |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.94406 |
| Output power listed is conducted. This device may be installed by Crown Equipment Corporation or authorized installer. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. OEM integrators and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application M3lFox/eKQ8rOyUtble42g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Crown Equipment Corporation 44 South Washington Street New Bremen, OH 45869 United States |
Date of Grant: 11/09/2015 Application Dated: 11/09/2015 |
| Attention: Ronald Ziegler , Director Test & Compliance |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YGP5000-01 |
| Name of Grantee: | Crown Equipment Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | RF ID Tracking System |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.75 - 927.25 | 0.94406 |
| Output power listed is conducted. This device may be installed by Crown Equipment Corporation or authorized installer. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. OEM integrators and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: |