FCC ID YHXMB20060321

Digital charcoal smoker

by Masterbuilt Manufacturing, LLC.

Grantee Code: YHX   Product Code: MB20060321
Latest application date: 2020-09-12

FCC ID Device Details

FCC IDYHXMB20060321
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeYHX
Product CodeMB20060321
Applicant BusinessMasterbuilt Manufacturing, LLC. 🇺🇸
Related Domains masterbuilt.com
Equipment ClassDigital charcoal smoker
Test FirmSHENZHEN STS TEST SERVICES CO.,LTD.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2020-09-12
2402-2480 MHzOriginal Equipment2020-09-12

Exhibits

DocumentTypeAvailableFile
User manual part 1Users Manual2020-09-12PDF 3.8 MB
User manual part 2Users Manual2020-09-12PDF 4.4 MB
Internal photosInternal Photos2020-09-12PDF 4.7 MB
External photosExternal Photos2020-09-12PDF 4.7 MB
LabelID Label/Location Info2020-09-12PDF 1.1 MB
Test setupTest Setup Photos2020-09-12PDF 192.3 KB
Test reportTest Report2020-09-12PDF 2.9 MB
Test reportTest Report2020-09-12PDF 3.3 MB
Cover letterCover Letter(s)2020-09-12PDF 282.9 KB
RF ExposureRF Exposure Info2020-09-12PDF 338 KB
Block Diagram Metadata onlyBlock DiagramPDF 1.8 MB
Schematics Metadata onlySchematicsPDF 1.8 MB
Operational Description Metadata onlyOperational DescriptionPDF 106.1 KB

Application Information

Application IDz4o6WnYxg9Zk+oMEFYkCJA==
Final Action Date2020-09-12
Application PurposeOriginal Equipment
Applicant FRN0019903939
ModelMB20060321
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionDigital charcoal smoker
Responsible PartyJohn Darin McLemore II, Development Manager, johnmclemore2@masterbuilt.com , 706-256-3910
Test FirmBovey Yang, SHENZHEN STS TEST SERVICES CO.,LTD., Bovey@stsapp.com , +86 755-36886288
TCB Emailstuart.beck@nemko.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. This device has 20 MHz and 40 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
z4o6WnYxg9Zk+oMEFYkCJA==2020-09-12Original Equipment
AroOUPTqgfVWm3syDHNO4Q==2020-09-12Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.007200015C
2402-2480 MHz0.001815C
2412-2462 MHz0.0986315C

Grants

TCB Grant - Application z4o6WnYxg9Zk+oMEFYkCJA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 09/12/2020

Application Dated: 09/12/2020
Masterbuilt Manufacturing, LLC.
1 Masterbuilt Court, Columbus, Georgia 31907, USA
Columbus, GA 31907
 
Attention: John McLemore II , Development Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YHXMB20060321
Name of Grantee:  Masterbuilt Manufacturing, LLC.
Equipment Class: Digital Transmission System
Notes: Digital charcoal smoker
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.09863  
15C 2402.0  -  2480.0 0.0018  

Output power listed is conducted. This device has 20 MHz and 40 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application z4o6WnYxg9Zk+oMEFYkCJA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Masterbuilt Manufacturing, LLC.
1 Masterbuilt Court, Columbus, Georgia 31907, USA
Columbus, GA 31907
United States
  Date of Grant: 09/12/2020

Application Dated: 09/12/2020
 
Attention: John McLemore II , Development Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YHXMB20060321
Name of Grantee:  Masterbuilt Manufacturing, LLC.
Equipment Class: Digital Transmission System
Notes: Digital charcoal smoker
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.09863  
15C 2402.0  -  2480.0 0.0018  

Output power listed is conducted. This device has 20 MHz and 40 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application AroOUPTqgfVWm3syDHNO4Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 09/12/2020

Application Dated: 09/12/2020
Masterbuilt Manufacturing, LLC.
1 Masterbuilt Court, Columbus, Georgia 31907, USA
Columbus, GA 31907
 
Attention: John McLemore II , Development Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YHXMB20060321
Name of Grantee:  Masterbuilt Manufacturing, LLC.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Digital charcoal smoker
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0072  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application AroOUPTqgfVWm3syDHNO4Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Masterbuilt Manufacturing, LLC.
1 Masterbuilt Court, Columbus, Georgia 31907, USA
Columbus, GA 31907
United States
  Date of Grant: 09/12/2020

Application Dated: 09/12/2020
 
Attention: John McLemore II , Development Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YHXMB20060321
Name of Grantee:  Masterbuilt Manufacturing, LLC.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Digital charcoal smoker
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0072  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: