FCC ID YL6WM2020CU

WLAN/BT USB Module

by Alarm.com Incorporated

Grantee Code: YL6   Product Code: WM2020CU
Latest application date: 2019-04-29

FCC ID Device Details

FCC IDYL6WM2020CU
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeYL6
Product CodeWM2020CU
Applicant BusinessAlarm.com Incorporated 🇺🇸
Related Domains alarm.com dekra.com
Equipment ClassWLAN/BT USB Module
Test FirmSGS Taiwan Ltd. Electronics & Communication Lab

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: 2AAK6WM2020CU Grant Date: 04/28/20172019-04-29
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: 2AAK6WM2020CU Grant Date: 04/28/20172019-04-29
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: 2AAK6WM2020CU Grant Date: 04/28/20172019-04-29

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2019-04-29PDF 1.3 MB
External PhotosExternal Photos2019-04-29PDF 492.1 KB
ID LabelID Label/Location Info2019-04-29PDF 16.3 KB
Label LocationID Label/Location Info2019-04-29PDF 174.9 KB
ATTESTATIONAttestation Statements2019-04-29PDF 151.2 KB
Authorization LetterCover Letter(s)2019-04-29PDF 453.2 KB
Declaration letter for electrically identicalCover Letter(s)2019-04-29PDF 690.9 KB
Declaration of authorizationCover Letter(s)2019-04-29PDF 641.9 KB

Application Information

Application IDovDIFmavSlh60HxbGuhQJQ==
Final Action Date2019-04-29
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: 2AAK6WM2020CU Grant Date: 04/28/2017
Applicant FRN0020041976
ModelWM2020CU
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionWLAN/BT USB Module
Responsible PartyDaniel Ramos, Senior VP, Corporate Development, dramos@alarm.com , 877-389-4033
AgentVincent Vincent Vincent, DEKRA Testing and Certification Co., Ltd., 886-2-8601-3788
Technical ContactAnnie Liu, DEKRA Testing and Certification Co., Ltd., annie-an.liu@dekra.com , 886-2-8601-3788
Non-Technical ContactAnnie Liu, DEKRA Testing and Certification Co., Ltd., annie-an.liu@dekra.com , 886-2-8601-3788
Test FirmWillis CHEN, SGS Taiwan Ltd. Electronics & Communication Lab, willis.chen@sgs.com , +886-2-2299-3279
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is conducted. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module

Applications

Application IDDatePurpose
ovDIFmavSlh60HxbGuhQJQ==2019-04-29Change in identification of presently authorized equipment. Original FCC ID: 2AAK6WM2020CU Grant Date: 04/28/2017
8JgoHnFZ4w1imqs20H7XDg==2019-04-29Change in identification of presently authorized equipment. Original FCC ID: 2AAK6WM2020CU Grant Date: 04/28/2017
2B0U0QgXQRqMmJNjkW3zEw==2019-04-29Change in identification of presently authorized equipment. Original FCC ID: 2AAK6WM2020CU Grant Date: 04/28/2017

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.00415CCC
2402-2480 MHz0.008000015CCC
2412-2462 MHz0.0715CCC, MO
2412-2462 MHz0.19315CCC, MO
2422-2452 MHz0.15415CCC, MO
5190-5230 MHz0.01615E38, CC, MO
5210 MHz0.00915E38, CC, MO
5260-5320 MHz0.01815E38, CC, MO
5270-5310 MHz0.01515E38, CC, MO
5290 MHz0.115E38, CC, MO
5500-5700 MHz0.01815E38, CC, MO
5510-5670 MHz0.01615E38, CC, MO
5530-5610 MHz0.0115E38, CC, MO
5745-5825 MHz0.01815E38, CC, MO
5755-5795 MHz0.01515E38, CC, MO
5775 MHz0.0115E38, CC, MO

Grants

TCB Grant - Application ovDIFmavSlh60HxbGuhQJQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 04/29/2019

Application Dated: 04/24/2019
Alarm.com Incorporated
8281 Greensboro Drive
Suite 100
Tysons, VA 22102
 
Attention: Daniel Ramos , Senior VP, Corporate Development

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YL6WM2020CU
Name of Grantee:  Alarm.com Incorporated
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WLAN/BT USB Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.008  

Power Output listed is conducted. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ovDIFmavSlh60HxbGuhQJQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Alarm.com Incorporated
8281 Greensboro Drive Suite 100
Tysons, VA 22102
United States
  Date of Grant: 04/29/2019

Application Dated: 04/24/2019
 
Attention: Daniel Ramos , Senior VP, Corporate Development

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YL6WM2020CU
Name of Grantee:  Alarm.com Incorporated
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WLAN/BT USB Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.008  

Power Output listed is conducted. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 8JgoHnFZ4w1imqs20H7XDg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 04/29/2019

Application Dated: 04/24/2019
Alarm.com Incorporated
8281 Greensboro Drive
Suite 100
Tysons, VA 22102
 
Attention: Daniel Ramos , Senior VP, Corporate Development

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YL6WM2020CU
Name of Grantee:  Alarm.com Incorporated
Equipment Class: Digital Transmission System
Notes: WLAN/BT USB Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  
CC MO 15C 2412.0  -  2462.0 0.07  
CC MO 15C 2412.0  -  2462.0 0.193  
CC MO 15C 2422.0  -  2452.0 0.154  

Power Output listed is conducted. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. Device is a 2 x 2 MIMO configuration, enabled for 2.4 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 8JgoHnFZ4w1imqs20H7XDg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Alarm.com Incorporated
8281 Greensboro Drive Suite 100
Tysons, VA 22102
United States
  Date of Grant: 04/29/2019

Application Dated: 04/24/2019
 
Attention: Daniel Ramos , Senior VP, Corporate Development

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YL6WM2020CU
Name of Grantee:  Alarm.com Incorporated
Equipment Class: Digital Transmission System
Notes: WLAN/BT USB Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  
CC MO 15C 2412.0  -  2462.0 0.07  
CC MO 15C 2412.0  -  2462.0 0.193  
CC MO 15C 2422.0  -  2452.0 0.154  

Power Output listed is conducted. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. Device is a 2 x 2 MIMO configuration, enabled for 2.4 GHz band and has 20 MHz and 40 MHz bandwidth operations as described in this filing


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 2B0U0QgXQRqMmJNjkW3zEw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 04/29/2019

Application Dated: 04/24/2019
Alarm.com Incorporated
8281 Greensboro Drive
Suite 100
Tysons, VA 22102
 
Attention: Daniel Ramos , Senior VP, Corporate Development

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YL6WM2020CU
Name of Grantee:  Alarm.com Incorporated
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN/BT USB Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.018  
38 CC MO 15E 5190.0  -  5230.0 0.016  
38 CC MO 15E 5210.0  -  5210.0 0.009  
38 CC MO 15E 5260.0  -  5320.0 0.018  
38 CC MO 15E 5270.0  -  5310.0 0.015  
38 CC MO 15E 5290.0  -  5290.0 0.1  
38 CC MO 15E 5500.0  -  5700.0 0.018  
38 CC MO 15E 5510.0  -  5670.0 0.016  
38 CC MO 15E 5530.0  -  5610.0 0.01  
38 CC MO 15E 5745.0  -  5825.0 0.018  
38 CC MO 15E 5755.0  -  5795.0 0.015  
38 CC MO 15E 5775.0  -  5775.0 0.01  

Power Output listed is conducted. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 2B0U0QgXQRqMmJNjkW3zEw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Alarm.com Incorporated
8281 Greensboro Drive Suite 100
Tysons, VA 22102
United States
  Date of Grant: 04/29/2019

Application Dated: 04/24/2019
 
Attention: Daniel Ramos , Senior VP, Corporate Development

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YL6WM2020CU
Name of Grantee:  Alarm.com Incorporated
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN/BT USB Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.018  
38 CC MO 15E 5190.0  -  5230.0 0.016  
38 CC MO 15E 5210.0  -  5210.0 0.009  
38 CC MO 15E 5260.0  -  5320.0 0.018  
38 CC MO 15E 5270.0  -  5310.0 0.015  
38 CC MO 15E 5290.0  -  5290.0 0.1  
38 CC MO 15E 5500.0  -  5700.0 0.018  
38 CC MO 15E 5510.0  -  5670.0 0.016  
38 CC MO 15E 5530.0  -  5610.0 0.01  
38 CC MO 15E 5745.0  -  5825.0 0.018  
38 CC MO 15E 5755.0  -  5795.0 0.015  
38 CC MO 15E 5775.0  -  5775.0 0.01  

Power Output listed is conducted. Single Modular Approval. This device is to be used only for mobile and fixed application. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. OEM integrators must insure that the end user has no manual instructions to remove or install this module. Device is a 2 x 2 MIMO configuration, enabled for 5 GHz band and has 20 MHz, 40 MHz and 80 MHz bandwidth operations as described in this filing


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: