FCC ID YLFSE2100WL
802.11ac Dual Band Module
by 7signal
Grantee Code: YLF Product Code: SE2100WL
Latest application date: 2015-08-29
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2015-08-29 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2015-08-28 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: TK4WLE900VX Grant Date: 06/10/2015 | 2015-08-26 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: TK4WLE900VX Grant Date: 06/10/2015 | 2015-08-26 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| users manual | Users Manual | 2016-02-27 | PDF 607.3 KB |
| 091115_usermanual | Users Manual | 2016-02-26 | PDF 605.6 KB |
| int photo 1 | Internal Photos | 2016-02-27 | PDF 1.8 MB |
| int photo 2 | Internal Photos | 2016-02-27 | PDF 2.1 MB |
| int photo 3 | Internal Photos | 2016-02-27 | PDF 1.9 MB |
| int photo 4 | Internal Photos | 2016-02-27 | PDF 1.7 MB |
| int photo 5 | Internal Photos | 2016-02-27 | PDF 1.9 MB |
| int photo1 | Internal Photos | 2016-02-26 | PDF 1.8 MB |
| int photo2 | Internal Photos | 2016-02-26 | PDF 2.1 MB |
| int photo3 | Internal Photos | 2016-02-26 | PDF 1.9 MB |
| int photo4 | Internal Photos | 2016-02-26 | PDF 1.7 MB |
| int photo5 | Internal Photos | 2016-02-26 | PDF 1.9 MB |
| ext photo 1 | External Photos | 2016-02-27 | PDF 1.9 MB |
| ext photo 2 | External Photos | 2016-02-27 | PDF 1.4 MB |
| ext photo 3 | External Photos | 2016-02-27 | PDF 1.7 MB |
| External Photos | External Photos | 2015-08-26 | PDF 272.9 KB |
| ID Label | ID Label/Location Info | 2015-08-26 | PDF 44.2 KB |
| ID Label Placement | ID Label/Location Info | 2015-08-26 | PDF 119.6 KB |
| 091415_test report | Test Report | 2015-08-29 | PDF 2.5 MB |
| Test report Metadata only | Test Report | 2015-08-29 | PDF 2.2 MB |
| Test report | Test Report | 2015-08-28 | PDF 867.4 KB |
| 091115_cover letter_restrict 20MHz BW | Cover Letter(s) | 2015-08-29 | PDF 176 KB |
| cover letter | Cover Letter(s) | 2015-08-29 | PDF 307.4 KB |
| cover letter_reduced freq range Metadata only | Cover Letter(s) | 2015-08-29 | PDF 178.6 KB |
| long term confidential req | Cover Letter(s) | 2015-08-29 | PDF 388.3 KB |
| short term confifrntial req | Cover Letter(s) | 2015-08-29 | PDF 376 KB |
| Long term confidential | Cover Letter(s) | 2015-08-28 | PDF 388.3 KB |
| short term confidential | Cover Letter(s) | 2015-08-28 | PDF 376 KB |
| Authorization Letter | Cover Letter(s) | 2015-08-26 | PDF 253.7 KB |
| Cover Letter | Cover Letter(s) | 2015-08-26 | PDF 339.1 KB |
| RF Exposure | RF Exposure Info | 2015-08-29 | PDF 138.6 KB |
| RF exposure | RF Exposure Info | 2015-08-28 | PDF 138.9 KB |
| Operational description Metadata only | Operational Description | PDF 592 KB | |
| operatinal description Metadata only | Operational Description | PDF 592 KB |
Application Information
| Application ID | +0rdLg2aPLEbDaJT9BcoTQ== |
|---|---|
| Final Action Date | 2015-08-29 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0020031522 |
| Model | SE2100WL |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | 802.11ac Dual Band Module |
| Responsible Party | Russell Wangler, CTO, russ.wangler@7signal.com  , 614-477-5959 |
| Agent | Michelle Michelle Michelle, CKC Certification Services, LLC, info@ckccertification.com  , 209-966-5240 |
| Technical Contact | Donald Sloan, 7signal Solutions, Inc, don.sloan@7signal.com , (330) 283-1574 |
| Non-Technical Contact | Jeff Reedy, 7signal Solutions, Inc, Jeff.Reedy@7signal.com , (330) 761-3515 |
| Test Firm | Wendy Fuster, F2 Labs, wfuster@f2labs.com  , 301-253-4500 |
| TCB Email | info@ckccertification.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 02/26/2016 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is average conducted. Device is operating in a 3x3 MIMO configuration as described in this filing. This module is approved in mobile configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40 and 80 MHz bandwidth modes. 20MHz mode is only authorized to operate from 5.5 to 5.7GHz. in the 5.47 -5.725GHz band Approved for use with antenna(s)and specific host as listed in this filing |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| +0rdLg2aPLEbDaJT9BcoTQ== | 2015-08-29 | Class II permissive change or modification of presently authorized equipment |
| SRQpjcmc1jQermLWiAALyA== | 2015-08-28 | Class II permissive change or modification of presently authorized equipment |
| WLv+NxUwMRwfEZDJocjtOg== | 2015-08-26 | Change in identification of presently authorized equipment. Original FCC ID: TK4WLE900VX Grant Date: 06/10/2015 |
| 8peJiq9ygV2kicxH02t+nw== | 2015-08-26 | Change in identification of presently authorized equipment. Original FCC ID: TK4WLE900VX Grant Date: 06/10/2015 |
Equipment Authorization
Grants
TCB Grant - Application WLv+NxUwMRwfEZDJocjtOg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 08/26/2015 Application Dated: 08/18/2015 |
| 7signal |
| 6155 Rockside Rd. |
| Suite 110 |
| Independence, OH 44131 |
| Attention: Russell Wangler , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YLFSE2100WL |
| Name of Grantee: | 7signal |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ac Dual Band Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.151 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.193 | ||
| 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.196 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.314 |
| Output power listed is average conducted. Device is operating in a 3x3 MIMO configuration as described in this filing. This module is approved in mobile configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40 and 80 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application WLv+NxUwMRwfEZDJocjtOg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
7signal 6155 Rockside Rd. Suite 110 Independence, OH 44131 United States |
Date of Grant: 08/26/2015 Application Dated: 08/18/2015 |
| Attention: Russell Wangler , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YLFSE2100WL |
| Name of Grantee: | 7signal |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ac Dual Band Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.151 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.193 | ||
| 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.196 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.314 |
| Output power listed is average conducted. Device is operating in a 3x3 MIMO configuration as described in this filing. This module is approved in mobile configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40 and 80 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 08/28/2015 Application Dated: 08/28/2015 |
| 7signal |
| 6155 Rockside Rd. |
| Suite 110 |
| Independence, OH 44131 |
| Attention: Russell Wangler , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YLFSE2100WL |
| Name of Grantee: | 7signal |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ac Dual Band Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.269 |
| Output power listed is average conducted. Device is operating in a 3x3 Multiplexing MIMO configuration as described in this filing. This module is approved in mobile configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode Approved for use with antenna(s) and specific host as listed in this filing |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application SRQpjcmc1jQermLWiAALyA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
7signal 6155 Rockside Rd. Suite 110 Independence, OH 44131 United States |
Date of Grant: 08/28/2015 Application Dated: 08/28/2015 |
| Attention: Russell Wangler , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YLFSE2100WL |
| Name of Grantee: | 7signal |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ac Dual Band Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.269 |
| Output power listed is average conducted. Device is operating in a 3x3 Multiplexing MIMO configuration as described in this filing. This module is approved in mobile configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth mode Approved for use with antenna(s) and specific host as listed in this filing |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 08/26/2015 Application Dated: 08/18/2015 |
| 7signal |
| 6155 Rockside Rd. |
| Suite 110 |
| Independence, OH 44131 |
| Attention: Russell Wangler , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YLFSE2100WL |
| Name of Grantee: | 7signal |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ac Dual Band Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.269 |
| Output power listed is average conducted. Device is operating in a 3x3 Multiplexing MIMO configuration as described in this filing. This module is approved in mobile configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 8peJiq9ygV2kicxH02t+nw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
7signal 6155 Rockside Rd. Suite 110 Independence, OH 44131 United States |
Date of Grant: 08/26/2015 Application Dated: 08/18/2015 |
| Attention: Russell Wangler , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YLFSE2100WL |
| Name of Grantee: | 7signal |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11ac Dual Band Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.269 |
| Output power listed is average conducted. Device is operating in a 3x3 Multiplexing MIMO configuration as described in this filing. This module is approved in mobile configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 08/29/2015 Application Dated: 08/29/2015 |
| 7signal |
| 6155 Rockside Rd. |
| Suite 110 |
| Independence, OH 44131 |
| Attention: Russell Wangler , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YLFSE2100WL |
| Name of Grantee: | 7signal |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ac Dual Band Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.151 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.193 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.196 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.314 |
| Output power listed is average conducted. Device is operating in a 3x3 MIMO configuration as described in this filing. This module is approved in mobile configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40 and 80 MHz bandwidth modes. 20MHz mode is only authorized to operate from 5.5 to 5.7GHz. in the 5.47 -5.725GHz band Approved for use with antenna(s)and specific host as listed in this filing |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application +0rdLg2aPLEbDaJT9BcoTQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
7signal 6155 Rockside Rd. Suite 110 Independence, OH 44131 United States |
Date of Grant: 08/29/2015 Application Dated: 08/29/2015 |
| Attention: Russell Wangler , CTO |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YLFSE2100WL |
| Name of Grantee: | 7signal |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11ac Dual Band Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.151 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.193 | ||
| 38 CC MO ND | 15E | 5500.0 - 5700.0 | 0.196 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.314 |
| Output power listed is average conducted. Device is operating in a 3x3 MIMO configuration as described in this filing. This module is approved in mobile configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40 and 80 MHz bandwidth modes. 20MHz mode is only authorized to operate from 5.5 to 5.7GHz. in the 5.47 -5.725GHz band Approved for use with antenna(s)and specific host as listed in this filing |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |