FCC ID YM780-9500

IP Camera

by Iconoscope, LLC dba Stem Innovation

Grantee Code: YM7   Product Code: 809500
Latest application date: 2017-11-29

FCC ID Device Details

FCC IDYM780-9500
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeYM7
Product Code809500
Applicant BusinessIconoscope, LLC dba Stem Innovation 🇺🇸
Related Domains steminnovation.com
Equipment ClassIP Camera
Test FirmUniversal Compliance Labs dba EMCE Engineering

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2017-11-29
5180-5240 MHzOriginal Equipment2017-11-29
2402-2480 MHzOriginal Equipment2017-11-29

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2018-05-20PDF 1.5 MB
Internal PhotosInternal Photos2018-05-20PDF 4.5 MB
External PhotosExternal Photos2018-05-20PDF 297.7 KB
ID Label and Location InfoID Label/Location Info2017-11-29PDF 1.1 MB
Test Setup PhotosTest Setup Photos2018-05-20PDF 166.3 KB
DFS Test ReportTest Report2017-11-29PDF 832.9 KB
RF Test ReportTest Report2017-11-29PDF 3.5 MB
RF Test Report - DSSTest Report2017-11-29PDF 3.4 MB
RF Test Report - DTSTest Report2017-11-29PDF 1.1 MB
RF Test Report - NIITest Report2017-11-29PDF 2.4 MB
RF Test Report - UNIITest Report2017-11-29PDF 3 MB
Confidential Request LetterCover Letter(s)2017-11-29PDF 126 KB
RF Exposure InfoRF Exposure Info2017-11-29PDF 294 KB
RF Exposure InfoRF Exposure Info2017-11-29PDF 336.5 KB
RF Exposure InfoRF Exposure Info2017-11-29PDF 427.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 53.8 KB
Schematics Metadata onlySchematicsPDF 400.3 KB
OP - Antenna Spec Metadata onlyOperational DescriptionPDF 401.2 KB
OP - Software Security Document Metadata onlyOperational DescriptionPDF 109.4 KB
Operational Description Metadata onlyOperational DescriptionPDF 7.2 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 140.5 KB

Application Information

Application IDK1lakPqfJaT8wGah7YFTqA==
Final Action Date2017-11-29
Application PurposeOriginal Equipment
Applicant FRN0021028501
Model80-9500
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionIP Camera
Responsible PartyMatt Ireland, Managing Member, mireland@steminnovation.com , 1-801-418-9405
Test FirmBob Cole, Universal Compliance Labs dba EMCE Engineering, bob@universalcompliance.com , 510-490-4307
TCB Emailtcb@hctamerica.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date05/20/2018
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is the peak conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance requirements. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device operates with 20 MHz channel bandwidth capabilities.

Applications

Application IDDatePurpose
K1lakPqfJaT8wGah7YFTqA==2017-11-29Original Equipment
H5H8zyrjCD3zyVlFCjbaYg==2017-11-29Original Equipment
6r9ZnEfFOv4xUJqaw2JS4w==2017-11-29Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.004490015CCC
2412-2462 MHz0.037230015CCC
5180-5240 MHz0.0051515E38, CC
5260-5320 MHz0.0067915E38, CC, ND
5500-5700 MHz0.0111915E38, CC, ND
5745-5825 MHz0.0122715E38, CC

Grants

TCB Grant - Application K1lakPqfJaT8wGah7YFTqA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  HCT America LLC
1726 Ringwood Avenue
San Jose, CA 95131
Date of Grant: 11/29/2017

Application Dated: 11/29/2017
Iconoscope, LLC dba Stem Innovation
529 East South Temple
Salt Lake City, UT 84102-1004
 
Attention: Matt Ireland , Managing Member

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YM780-9500
Name of Grantee:  Iconoscope, LLC dba Stem Innovation
Equipment Class: Digital Transmission System
Notes: IP Camera
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.03723  

Power listed is the peak conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance requirements. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device operates with 20 MHz channel bandwidth capabilities.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application K1lakPqfJaT8wGah7YFTqA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Iconoscope, LLC dba Stem Innovation
529 East South Temple
Salt Lake City, UT 84102-1004
United States
  Date of Grant: 11/29/2017

Application Dated: 11/29/2017
 
Attention: Matt Ireland , Managing Member

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YM780-9500
Name of Grantee:  Iconoscope, LLC dba Stem Innovation
Equipment Class: Digital Transmission System
Notes: IP Camera
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.03723  

Power listed is the peak conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance requirements. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device operates with 20 MHz channel bandwidth capabilities.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application H5H8zyrjCD3zyVlFCjbaYg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  HCT America LLC
1726 Ringwood Avenue
San Jose, CA 95131
Date of Grant: 11/29/2017

Application Dated: 11/29/2017
Iconoscope, LLC dba Stem Innovation
529 East South Temple
Salt Lake City, UT 84102-1004
 
Attention: Matt Ireland , Managing Member

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YM780-9500
Name of Grantee:  Iconoscope, LLC dba Stem Innovation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IP Camera
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.00515  
38 CC ND 15E 5260.0  -  5320.0 0.00679  
38 CC ND 15E 5500.0  -  5700.0 0.01119  
38 CC 15E 5745.0  -  5825.0 0.01227  

Power listed is the peak conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance requirements. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device operates with 20 MHz and 40 MHz channel bandwidth capabilities.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application H5H8zyrjCD3zyVlFCjbaYg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Iconoscope, LLC dba Stem Innovation
529 East South Temple
Salt Lake City, UT 84102-1004
United States
  Date of Grant: 11/29/2017

Application Dated: 11/29/2017
 
Attention: Matt Ireland , Managing Member

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YM780-9500
Name of Grantee:  Iconoscope, LLC dba Stem Innovation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: IP Camera
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.00515  
38 CC ND 15E 5260.0  -  5320.0 0.00679  
38 CC ND 15E 5500.0  -  5700.0 0.01119  
38 CC 15E 5745.0  -  5825.0 0.01227  

Power listed is the peak conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance requirements. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device operates with 20 MHz and 40 MHz channel bandwidth capabilities.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 6r9ZnEfFOv4xUJqaw2JS4w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  HCT America LLC
1726 Ringwood Avenue
San Jose, CA 95131
Date of Grant: 11/29/2017

Application Dated: 11/29/2017
Iconoscope, LLC dba Stem Innovation
529 East South Temple
Salt Lake City, UT 84102-1004
 
Attention: Matt Ireland , Managing Member

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YM780-9500
Name of Grantee:  Iconoscope, LLC dba Stem Innovation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IP Camera
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00449  

Power listed is the peak conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance requirements. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 6r9ZnEfFOv4xUJqaw2JS4w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Iconoscope, LLC dba Stem Innovation
529 East South Temple
Salt Lake City, UT 84102-1004
United States
  Date of Grant: 11/29/2017

Application Dated: 11/29/2017
 
Attention: Matt Ireland , Managing Member

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YM780-9500
Name of Grantee:  Iconoscope, LLC dba Stem Innovation
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: IP Camera
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00449  

Power listed is the peak conducted output power. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance requirements. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: