FCC ID YRW-BT50
Bluetooth module
by DATECS LTD.
Grantee Code: YRW Product Code: BT50
Latest application date: 2022-05-09
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-05-09 |
| 2402-2480 MHz | Original Equipment | 2022-01-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2022-05-09 | PDF 469.5 KB |
| User Manual | Users Manual | 2022-01-05 | PDF 428.1 KB |
| Internal photos | Internal Photos | 2022-05-09 | PDF 141.1 KB |
| Internal photos | Internal Photos | 2022-01-05 | PDF 141.1 KB |
| External photos | External Photos | 2022-05-09 | PDF 35.2 KB |
| External photos | External Photos | 2022-01-05 | PDF 35.1 KB |
| Label | ID Label/Location Info | 2022-05-09 | PDF 24.5 KB |
| Label and Location | ID Label/Location Info | 2022-01-05 | PDF 24.5 KB |
| Test Setup Photos | Test Setup Photos | 2022-01-05 | PDF 296 KB |
| Test Report | Test Report | 2022-01-05 | PDF 3.7 MB |
| Agent Authorization | Cover Letter(s) | 2022-05-09 | PDF 12.6 KB |
| FCC Class II PC request letter Rev1.1 | Cover Letter(s) | 2022-05-09 | PDF 11.4 KB |
| FCC Short & Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2022-05-09 | PDF 73.5 KB |
| Modular Transmitter Approval | Cover Letter(s) | 2022-05-09 | PDF 223.6 KB |
| Agent Authorization Rev 1.0 | Cover Letter(s) | 2022-01-05 | PDF 12.6 KB |
| FCC_Short Long Term Confidentiality Request | Cover Letter(s) | 2022-01-05 | PDF 73.4 KB |
| Modular Transmitter Approval | Cover Letter(s) | 2022-01-05 | PDF 223.6 KB |
| RFExposure | RF Exposure Info | 2022-05-09 | PDF 459.5 KB |
| RF Exposure | RF Exposure Info | 2022-01-05 | PDF 405.5 KB |
| Block Metadata only | Block Diagram | PDF 202.2 KB | |
| SCH Metadata only | Schematics | PDF 253.3 KB | |
| OP Metadata only | Operational Description | PDF 540.4 KB | |
| Operation Description Metadata only | Operational Description | PDF 540.4 KB |
Application Information
| Application ID | 5Q+NZwSTJCz1sRgjTNbeOw== |
|---|---|
| Final Action Date | 2022-05-09 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0023778558 |
| Model | BT50 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Bluetooth module |
| Responsible Party | PENCHO ILIEV, Vice President, pencho@datecs.bg  , +35929740055 |
| Technical Contact | DATECS LTD., pencho@datecs.bg |
| Test Firm | Gavin Liang, Shenzhen LCS Compliance Testing Laboratory Ltd., gavin.liang@lcs-cert.com  , 0755-82591330 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II permissive change. Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 5Q+NZwSTJCz1sRgjTNbeOw== | 2022-05-09 | Class II permissive change or modification of presently authorized equipment |
| tyfxXIk8rpRd8G0QatsVrg== | 2022-01-05 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2402-2480 MHz | 0.0018000 | 15C |
Grants
TCB Grant - Application tyfxXIk8rpRd8G0QatsVrg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 01/05/2022 Application Dated: 01/05/2022 |
| DATECS LTD. |
| 115A Tzarigradsko Shosse, Fl.4 |
| SOFIA, 1784 Bulgaria |
| Attention: PENCHO ILIEV , Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YRW-BT50 |
| Name of Grantee: | DATECS LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0018 |
| Single Modular Approval Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
EAS Grant - Application tyfxXIk8rpRd8G0QatsVrg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DATECS LTD. 115A Tzarigradsko Shosse, Fl.4 P.O. Box , SOFIA, 1784 Bulgaria |
Date of Grant: 01/05/2022 Application Dated: 01/05/2022 |
| Attention: PENCHO ILIEV , Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YRW-BT50 |
| Name of Grantee: | DATECS LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0018 |
| Single Modular Approval Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 05/09/2022 Application Dated: 05/09/2022 |
| DATECS LTD. |
| 115A Tzarigradsko Shosse, Fl.4 |
| SOFIA, 1784 Bulgaria |
| Attention: PENCHO ILIEV , Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YRW-BT50 |
| Name of Grantee: | DATECS LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0018 |
| Class II permissive change. Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
EAS Grant - Application 5Q+NZwSTJCz1sRgjTNbeOw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
DATECS LTD. 115A Tzarigradsko Shosse, Fl.4 P.O. Box , SOFIA, 1784 Bulgaria |
Date of Grant: 05/09/2022 Application Dated: 05/09/2022 |
| Attention: PENCHO ILIEV , Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YRW-BT50 |
| Name of Grantee: | DATECS LTD. |
| Equipment Class: | Digital Transmission System |
| Notes: | Bluetooth module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.0018 |
| Class II permissive change. Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| Mail To: |