FCC ID YV8-CU282
802.11 b/g/n Wi-Fi Module
by Pass & Seymour, Inc. d/b/a Legrand
Grantee Code: YV8 Product Code: CU282
Latest application date: 2015-07-28
FCC ID Device Details
| FCC ID | YV8-CU282 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | YV8 |
| Product Code | CU282 |
| Applicant Business | Pass & Seymour, Inc. d/b/a Legrand 🇺🇸 |
| Related Domains |  legrand.us |
| Equipment Class | 802.11 b/g/n Wi-Fi Module |
| Test Firm | Bureau Veritas Consumer Products Services, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2015-07-28 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2015-07-28 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CU282 Grant Date: 05/02/2013 | 2015-05-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Internal Photos | Internal Photos | 2015-07-28 | PDF 705.3 KB |
| Internal Photos (HA7040) | Internal Photos | 2015-07-28 | PDF 525.3 KB |
| Internal Photos (CU-282) | Internal Photos | 2015-07-28 | PDF 1.9 MB |
| External Photos | External Photos | 2015-07-28 | PDF 705.3 KB |
| External Photos (HA7040) | External Photos | 2015-07-28 | PDF 300.3 KB |
| External Photos (CU-282) | External Photos | 2015-07-28 | PDF 1.9 MB |
| EUT Photos | External Photos | 2015-05-06 | PDF 108.7 KB |
| Label | ID Label/Location Info | 2015-05-06 | PDF 19.5 KB |
| Label & Location | ID Label/Location Info | 2015-05-06 | PDF 74.6 KB |
| Test Setup Photos | Test Setup Photos | 2015-07-28 | PDF 547.9 KB |
| Test Setup Photos | Test Setup Photos | 2015-07-28 | PDF 308.8 KB |
| Test Report | Test Report | 2015-07-28 | PDF 1.6 MB |
| Test Report | Test Report | 2015-07-28 | PDF 1.7 MB |
| Authorization Letter | Cover Letter(s) | 2015-07-28 | PDF 142.1 KB |
| Authorization Letter | Cover Letter(s) | 2015-07-28 | PDF 31.7 KB |
| Permissive Change Request Letter | Cover Letter(s) | 2015-07-28 | PDF 30.8 KB |
| Permissive Change Request Letter | Cover Letter(s) | 2015-07-28 | PDF 81.6 KB |
| Authorization Letter | Cover Letter(s) | 2015-05-06 | PDF 81.5 KB |
| Authorization Letter from original applicant | Cover Letter(s) | 2015-05-06 | PDF 377.7 KB |
| Change of ID Letter | Cover Letter(s) | 2015-05-06 | PDF 31.2 KB |
Application Information
| Application ID | bm508pHTgM7BUaLKpzR/pg== |
|---|---|
| Final Action Date | 2015-07-28 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0020276143 |
| Model | CU282 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11 b/g/n Wi-Fi Module |
| Responsible Party | Todd Snedeker, Engineer, Product Sr, Todd.snedeker@legrand.us , 7175465475 |
| Test Firm | Sarb Shelopal, Bureau Veritas Consumer Products Services, Inc., Sarbjit.Shelopal@bureauveritas.com  , +1 925 963 4420 |
| TCB Email | tcb@siemic.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | C2PC for co-locate and operate simultaneously with the Top Dog Modular RF Transceiver (FCC ID: YV8-203015) Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| bm508pHTgM7BUaLKpzR/pg== | 2015-07-28 | Class II permissive change or modification of presently authorized equipment |
| 3cokbl6LyZfKmu/Fu3bXoA== | 2015-07-28 | Class II permissive change or modification of presently authorized equipment |
| ALr5IFtoi/Yka+4c7tTQGw== | 2015-05-06 | Change in identification of presently authorized equipment. Original FCC ID: TLZ-CU282 Grant Date: 05/02/2013 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.2990000 | 15C |
Grants
TCB Grant - Application bm508pHTgM7BUaLKpzR/pg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 07/28/2015 Application Dated: 07/28/2015 |
| Pass & Seymour, Inc. d/b/a Legrand |
| 301 Fulling Mill Road |
| Suite G |
| Middletown, PA 17057 |
| Attention: Todd Snedeker , Engineer, Product Sr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YV8-CU282 |
| Name of Grantee: | Pass & Seymour, Inc. d/b/a Legrand |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g/n Wi-Fi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.299 |
| C2PC for co-locate and operate simultaneously with the Top Dog Modular RF Transceiver (FCC ID: YV8-203015) Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
EAS Grant - Application bm508pHTgM7BUaLKpzR/pg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Pass & Seymour, Inc. d/b/a Legrand 301 Fulling Mill Road Suite G Middletown, PA 17057 United States |
Date of Grant: 07/28/2015 Application Dated: 07/28/2015 |
| Attention: Todd Snedeker , Engineer, Product Sr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YV8-CU282 |
| Name of Grantee: | Pass & Seymour, Inc. d/b/a Legrand |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g/n Wi-Fi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.299 |
| C2PC for co-locate and operate simultaneously with the Top Dog Modular RF Transceiver (FCC ID: YV8-203015) Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 05/06/2015 Application Dated: 05/06/2015 |
| Pass & Seymour, Inc. d/b/a Legrand |
| 301 Fulling Mill Road |
| Suite G |
| Middletown, PA 17057 |
| Attention: Todd Snedeker , Engineer, Product Sr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YV8-CU282 |
| Name of Grantee: | Pass & Seymour, Inc. d/b/a Legrand |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g/n Wi-Fi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.299 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
EAS Grant - Application ALr5IFtoi/Yka+4c7tTQGw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Pass & Seymour, Inc. d/b/a Legrand 301 Fulling Mill Road Suite G Middletown, PA 17057 United States |
Date of Grant: 05/06/2015 Application Dated: 05/06/2015 |
| Attention: Todd Snedeker , Engineer, Product Sr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YV8-CU282 |
| Name of Grantee: | Pass & Seymour, Inc. d/b/a Legrand |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g/n Wi-Fi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.299 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 07/28/2015 Application Dated: 07/28/2015 |
| Pass & Seymour, Inc. d/b/a Legrand |
| 301 Fulling Mill Road |
| Suite G |
| Middletown, PA 17057 |
| Attention: Todd Snedeker , Engineer, Product Sr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YV8-CU282 |
| Name of Grantee: | Pass & Seymour, Inc. d/b/a Legrand |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g/n Wi-Fi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.299 |
| C2PC for co-locate and operate simultaneously with Z-Wave Transceiver Device (FCC ID: YV8-HA7040) Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
EAS Grant - Application 3cokbl6LyZfKmu/Fu3bXoA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Pass & Seymour, Inc. d/b/a Legrand 301 Fulling Mill Road Suite G Middletown, PA 17057 United States |
Date of Grant: 07/28/2015 Application Dated: 07/28/2015 |
| Attention: Todd Snedeker , Engineer, Product Sr |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | YV8-CU282 |
| Name of Grantee: | Pass & Seymour, Inc. d/b/a Legrand |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 b/g/n Wi-Fi Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.299 |
| C2PC for co-locate and operate simultaneously with Z-Wave Transceiver Device (FCC ID: YV8-HA7040) Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end-user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| Mail To: |