1. FCC ID
  2. YZK
  3. YZKSMCWBR14SN5V2

FCC ID YZKSMCWBR14SN5V2

150 Mbps 4-Port Wireless Broadband Router

by Edgecore Networks Corporation

Grantee Code: YZK   Product Code: SMCWBR14SN5V2
Latest application date: 2013-03-28

FCC ID Device Details

FCC IDYZKSMCWBR14SN5V2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeYZK
Product CodeSMCWBR14SN5V2
Applicant BusinessEdgecore Networks Corporation 🇹🇼
Related Domains edge-core.com
Equipment Class150 Mbps 4-Port Wireless Broadband Router
Test FirmAudix Technology (Shenzhen) Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2013-03-28

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2013-03-28PDF 3.8 MB
Internal PhotosInternal Photos2013-03-28PDF 331 KB
External PhotosExternal Photos2013-03-28PDF 198.1 KB
Label and LocationID Label/Location Info2013-03-28PDF 1.2 MB
Test Setup PhotosTest Setup Photos2013-03-28PDF 132.9 KB
Test Report DTS Pt 1Test Report2013-03-28PDF 3.5 MB
Test Report DTS Pt 2Test Report2013-03-28PDF 3.9 MB
Test Report DTS Pt 3Test Report2013-03-28PDF 3.7 MB
Authorization LetterCover Letter(s)2013-03-28PDF 18 KB
Confidentiality LetterCover Letter(s)2013-03-28PDF 18 KB
DoC LetterCover Letter(s)2013-03-28PDF 15.2 KB
RF Exposure MPERF Exposure Info2013-03-28PDF 52.3 KB

Application Information

Application IDeEqTlWumPdH4mGQSi8CClQ==
Final Action Date2013-03-28
Application PurposeOriginal Equipment
Applicant FRN0020336723
ModelSMCWBR14SN5V2
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description150 Mbps 4-Port Wireless Broadband Router
Responsible PartyLinda Sung, PM, linda_sung@edge-core.com , 886 3-563-8888
Technical ContactSunny Lu, Audix Technology, sunny_lu@audix.com.cn , 8675526639497
Test FirmSmart Tsai, Audix Technology (Shenzhen) Co., Ltd., sindy_song@audix.com.cn , 86-755-26639495
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter also has 20 MHz and 40 MHz bandwidth modes as described in this filing. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
eEqTlWumPdH4mGQSi8CClQ==2013-03-28Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.47215C
2422-2452 MHz0.38815C

Grants

TCB Grant - Application eEqTlWumPdH4mGQSi8CClQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
 Date of Grant: 03/28/2013

Application Dated: 03/28/2013
Edgecore Networks Corporation
No.1 Creation Rd. III
Hsinchu Science Park,
Hsinchu, 30077
Taiwan
 
Attention: Linda Sung , PM

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YZKSMCWBR14SN5V2
Name of Grantee:  Edgecore Networks Corporation
Equipment Class: Digital Transmission System
Notes: 150 Mbps 4-Port Wireless Broadband Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.472  
15C 2422.0  -  2452.0 0.388  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter also has 20 MHz and 40 MHz bandwidth modes as described in this filing. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application eEqTlWumPdH4mGQSi8CClQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Edgecore Networks Corporation
No.1 Creation Rd. III Hsinchu Science Park,
Hsinchu, 30077
Taiwan 		  Date of Grant: 03/28/2013

Application Dated: 03/28/2013
 
Attention: Linda Sung , PM

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YZKSMCWBR14SN5V2
Name of Grantee:  Edgecore Networks Corporation
Equipment Class: Digital Transmission System
Notes: 150 Mbps 4-Port Wireless Broadband Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2412.0  -  2462.0 0.472  
15C 2422.0  -  2452.0 0.388  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This transmitter also has 20 MHz and 40 MHz bandwidth modes as described in this filing. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance.



Mail To: