FCC ID YZKSMCWTVA100

Intel WiDi Adapter

by Edgecore Networks Corporation

Grantee Code: YZK   Product Code: SMCWTVA100
Latest application date: 2012-11-09

FCC ID Device Details

FCC IDYZKSMCWTVA100
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeYZK
Product CodeSMCWTVA100
Applicant BusinessEdgecore Networks Corporation 🇹🇼
Related Domains edge-core.com
Equipment ClassIntel WiDi Adapter
Test FirmCerpass Technology Corporation

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: Z7ZMAXMEDIAWIFI2 Grant Date: 09/12/20122012-11-09
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: Z7ZMAXMEDIAWIFI2 Grant Date: 09/12/20122012-11-09

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2012-11-09PDF 1 MB
ExtExternal Photos2012-11-09PDF 173.8 KB
External PhotosExternal Photos2012-11-09PDF 173.8 KB
LabelID Label/Location Info2012-11-09PDF 138.1 KB
AuthorizationCover Letter(s)2012-11-09PDF 186.8 KB
Change RequestCover Letter(s)2012-11-09PDF 26.9 KB
Chenge RequestCover Letter(s)2012-11-09PDF 26.9 KB

Application Information

Application IDpOSPksnSEQN34/7H+3fCNw==
Final Action Date2012-11-09
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: Z7ZMAXMEDIAWIFI2 Grant Date: 09/12/2012
Applicant FRN0020336723
ModelSMCWTVA100
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionIntel WiDi Adapter
Responsible PartyLinda Sung, PM, linda_sung@edge-core.com , 886 3-563-8888
Technical ContactMark Koop, Teleconformity, mark.koop@teleconformity.com , (31)848362566
Test FirmHill Chen, Cerpass Technology Corporation, hillc@cerpass.com.tw , 886-2-2655-8100
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsModular Approval restricted to mobile host products. Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter approval procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
pOSPksnSEQN34/7H+3fCNw==2012-11-09Change in identification of presently authorized equipment. Original FCC ID: Z7ZMAXMEDIAWIFI2 Grant Date: 09/12/2012
LRKhZ3X3bX0WHig0NZD2sw==2012-11-09Change in identification of presently authorized equipment. Original FCC ID: Z7ZMAXMEDIAWIFI2 Grant Date: 09/12/2012

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.0971715CCC
2422-2452 MHz0.0391815CCC
5180-5240 MHz0.0080915ECC
5190-5230 MHz0.0068415ECC
5745-5825 MHz0.0423115CCC
5755-5795 MHz0.0409415CCC

Grants

TCB Grant - Application pOSPksnSEQN34/7H+3fCNw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 11/09/2012

Application Dated: 11/09/2012
Edgecore Networks Corporation
No.1 Creation Rd. III
Hsinchu Science Park,
Hsinchu, 30077
Taiwan
 
Attention: Linda Sung , PM

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YZKSMCWTVA100
Name of Grantee:  Edgecore Networks Corporation
Equipment Class: Digital Transmission System
Notes: Intel WiDi Adapter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.09717  
CC 15C 2422.0  -  2452.0 0.03918  
CC 15C 5745.0  -  5825.0 0.04231  
CC 15C 5755.0  -  5795.0 0.04094  

Modular Approval restricted to mobile host products. Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter approval procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application pOSPksnSEQN34/7H+3fCNw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Edgecore Networks Corporation
No.1 Creation Rd. III Hsinchu Science Park,
Hsinchu, 30077
Taiwan
  Date of Grant: 11/09/2012

Application Dated: 11/09/2012
 
Attention: Linda Sung , PM

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YZKSMCWTVA100
Name of Grantee:  Edgecore Networks Corporation
Equipment Class: Digital Transmission System
Notes: Intel WiDi Adapter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.09717  
CC 15C 2422.0  -  2452.0 0.03918  
CC 15C 5745.0  -  5825.0 0.04231  
CC 15C 5755.0  -  5795.0 0.04094  

Modular Approval restricted to mobile host products. Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter approval procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application LRKhZ3X3bX0WHig0NZD2sw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 11/09/2012

Application Dated: 11/09/2012
Edgecore Networks Corporation
No.1 Creation Rd. III
Hsinchu Science Park,
Hsinchu, 30077
Taiwan
 
Attention: Linda Sung , PM

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YZKSMCWTVA100
Name of Grantee:  Edgecore Networks Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel WiDi Adapter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.00809  
CC 15E 5190.0  -  5230.0 0.00684  

Modular Approval restricted to mobile host products. Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter approval procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application LRKhZ3X3bX0WHig0NZD2sw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Edgecore Networks Corporation
No.1 Creation Rd. III Hsinchu Science Park,
Hsinchu, 30077
Taiwan
  Date of Grant: 11/09/2012

Application Dated: 11/09/2012
 
Attention: Linda Sung , PM

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YZKSMCWTVA100
Name of Grantee:  Edgecore Networks Corporation
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Intel WiDi Adapter
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.00809  
CC 15E 5190.0  -  5230.0 0.00684  

Modular Approval restricted to mobile host products. Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter approval procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: