FCC ID YZP-ATC5CPC001

RF Module

by LG Innotek Co., Ltd.

Grantee Code: YZP   Product Code: ATC5CPC001
Latest application date: 2020-09-29

FCC ID Device Details

FCC IDYZP-ATC5CPC001
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeYZP
Product CodeATC5CPC001
Applicant BusinessLG Innotek Co., Ltd. 🇰🇷
Related Domains lginnotek.com
Equipment ClassRF Module
Test FirmONETECH Corp.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2020-09-29
2402-2480 MHzOriginal Equipment2020-09-29
5180-5240 MHzOriginal Equipment2020-09-29

Exhibits

DocumentTypeAvailableFile
User-ManualUsers Manual2021-03-28PDF 518.2 KB
Internal_PhotosInternal Photos2021-03-28PDF 612.7 KB
Internal_photosInternal Photos2021-03-28PDF 612.7 KB
Ext_PhotosExternal Photos2021-03-28PDF 262.5 KB
External_photosExternal Photos2021-03-28PDF 262.5 KB
Label and Label_LocationID Label/Location Info2020-09-29PDF 53.2 KB
Test_SetupTest Setup Photos2021-03-28PDF 1.1 MB
Test_Setup_photosTest Setup Photos2021-03-28PDF 1.1 MB
FCC(Cer)[Bluetooth LE]_2008003013_LG Innotek Co., Ltd._ATC5CPC001Test Report2020-09-29PDF 924.2 KB
FCC(Cer)[Bluetooth]_2008003013_LG Innotek Co., Ltd._ATC5CPC001Test Report2020-09-29PDF 2.8 MB
FCC(Cer)[WLAN 2G]_2008003013_LG Innotek Co., Ltd._ATC5CPC001Test Report2020-09-29PDF 3.7 MB
FCC(Cer)[WLAN 5G]_2008003013_LG Innotek Co., Ltd._ATC5CPC00_Revision 01_1Test Report2020-09-29PDF 5.8 MB
FCC(Cer)[WLAN 5G]_2008003013_LG Innotek Co., Ltd._ATC5CPC00_Revision 01_2Test Report2020-09-29PDF 3.1 MB
FCC Modular Approval RequestCover Letter(s)2020-09-29PDF 52.1 KB
FCC Software Configuration Control DeclarationCover Letter(s)2020-09-29PDF 23.2 KB
FCC_Long_Term_Only_Confidentiality_RequestCover Letter(s)2020-09-29PDF 55.2 KB
FCC_Short_&_Long_Term_ConfidentialityCover Letter(s)2020-09-29PDF 55.2 KB
Letter_of_AuthorizationCover Letter(s)2020-09-29PDF 20.5 KB
FCC(EMF)_2008003013_LG Innotek Co., Ltd._ATC5CPC001RF Exposure Info2020-09-29PDF 297.6 KB
Block_Diagram Metadata onlyBlock DiagramPDF 46.4 KB
SCH Metadata onlySchematicsPDF 421.9 KB
Schematic Metadata onlySchematicsPDF 421.9 KB
Operation_Description Metadata onlyOperational DescriptionPDF 211 KB
operation_description Metadata onlyOperational DescriptionPDF 211 KB
FCC Software Security Requirements for UNII devices Metadata onlySDR Software/Security InfPDF 98.8 KB
Part_List Metadata onlyParts List/Tune Up InfoPDF 171.9 KB

Application Information

Application IDsXPoiPMRDxD+PsZMHTjqYg==
Final Action Date2020-09-29
Application PurposeOriginal Equipment
Applicant FRN0020332813
ModelATC5CPC001
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionRF Module
Responsible PartyJeong Inchang, Senior Research Engineer, ic.jeong@lginnotek.com , +82-62-950-0332
Technical ContactLG Innotek Co., Ltd., ic.jeong@lginnotek.com
Test FirmKi Hong Nam, ONETECH Corp., kihong.nam@onetech.co.kr , 82-31-799-9580
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date03/28/2021
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Output power listed is conducted power. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
sXPoiPMRDxD+PsZMHTjqYg==2020-09-29Original Equipment
iTKZCHCI5STlxxAEYdVODA==2020-09-29Original Equipment
ZE1de0EdRD27WeEUl9zvrg==2020-09-29Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.0026615CCC
2402-2480 MHz0.003050015CCC
2412-2462 MHz0.0674515CCC, MO
5180-5240 MHz0.0636815E38, CC, MO
5260-5320 MHz0.0734515E38, CC, MO, ND
5500-5700 MHz0.0939715E38, CC, MO, ND
5745-5825 MHz0.0619415E38, CC, MO

Grants

TCB Grant - Application ZE1de0EdRD27WeEUl9zvrg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 09/29/2020

Application Dated: 09/29/2020
LG Innotek Co., Ltd.
26, Hanamsandan 5beon-ro Gwangsan-gu
P.O. Box 506-731,
Gwangju, 506-731
South Korea
 
Attention: Jeong Inchang , Senior Research Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YZP-ATC5CPC001
Name of Grantee:  LG Innotek Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: RF Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.06368  
38 CC MO ND 15E 5260.0  -  5320.0 0.07345  
38 CC MO ND 15E 5500.0  -  5700.0 0.09397  
38 CC MO 15E 5745.0  -  5825.0 0.06194  

Single Modular Approval. Output power listed is maximum combined conducted power.This device contains 20, 40 and 80 MHz signal bandwidth.Device is a 2x2 MIMO as is described in the filing.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application ZE1de0EdRD27WeEUl9zvrg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LG Innotek Co., Ltd.
26, Hanamsandan 5beon-ro Gwangsan-gu P.O. Box 506-731,
Gwangju, 506-731
South Korea
  Date of Grant: 09/29/2020

Application Dated: 09/29/2020
 
Attention: Jeong Inchang , Senior Research Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YZP-ATC5CPC001
Name of Grantee:  LG Innotek Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: RF Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.06368  
38 CC MO ND 15E 5260.0  -  5320.0 0.07345  
38 CC MO ND 15E 5500.0  -  5700.0 0.09397  
38 CC MO 15E 5745.0  -  5825.0 0.06194  

Single Modular Approval. Output power listed is maximum combined conducted power.This device contains 20, 40 and 80 MHz signal bandwidth.Device is a 2x2 MIMO as is described in the filing.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application sXPoiPMRDxD+PsZMHTjqYg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 09/29/2020

Application Dated: 09/29/2020
LG Innotek Co., Ltd.
26, Hanamsandan 5beon-ro Gwangsan-gu
P.O. Box 506-731,
Gwangju, 506-731
South Korea
 
Attention: Jeong Inchang , Senior Research Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YZP-ATC5CPC001
Name of Grantee:  LG Innotek Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RF Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00305  

Single Modular Approval. Output power listed is conducted power. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application sXPoiPMRDxD+PsZMHTjqYg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LG Innotek Co., Ltd.
26, Hanamsandan 5beon-ro Gwangsan-gu P.O. Box 506-731,
Gwangju, 506-731
South Korea
  Date of Grant: 09/29/2020

Application Dated: 09/29/2020
 
Attention: Jeong Inchang , Senior Research Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YZP-ATC5CPC001
Name of Grantee:  LG Innotek Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RF Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00305  

Single Modular Approval. Output power listed is conducted power. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application iTKZCHCI5STlxxAEYdVODA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 09/29/2020

Application Dated: 09/29/2020
LG Innotek Co., Ltd.
26, Hanamsandan 5beon-ro Gwangsan-gu
P.O. Box 506-731,
Gwangju, 506-731
South Korea
 
Attention: Jeong Inchang , Senior Research Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YZP-ATC5CPC001
Name of Grantee:  LG Innotek Co., Ltd.
Equipment Class: Digital Transmission System
Notes: RF Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00266  
CC MO 15C 2412.0  -  2462.0 0.06745  

Single Modular Approval. Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application iTKZCHCI5STlxxAEYdVODA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LG Innotek Co., Ltd.
26, Hanamsandan 5beon-ro Gwangsan-gu P.O. Box 506-731,
Gwangju, 506-731
South Korea
  Date of Grant: 09/29/2020

Application Dated: 09/29/2020
 
Attention: Jeong Inchang , Senior Research Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YZP-ATC5CPC001
Name of Grantee:  LG Innotek Co., Ltd.
Equipment Class: Digital Transmission System
Notes: RF Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00266  
CC MO 15C 2412.0  -  2462.0 0.06745  

Single Modular Approval. Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: