FCC ID YZP-ETPPDRPP01

4PPoE-BLE WLAN Bridge

by LG Innotek Co., Ltd.

Grantee Code: YZP   Product Code: ETPPDRPP01
Latest application date: 2025-07-18

FCC ID Device Details

FCC IDYZP-ETPPDRPP01
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeYZP
Product CodeETPPDRPP01
Applicant BusinessLG Innotek Co., Ltd. 🇰🇷
Related Domains lginnotek.com
Equipment Class4PPoE-BLE WLAN Bridge
Test FirmONETECH Corp.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2025-07-18
5180-5240 MHzOriginal Equipment2025-07-18
2402-2480 MHzOriginal Equipment2025-07-18

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2026-01-14PDF 474.6 KB
Internal PhotosInternal Photos2026-01-14PDF 4.1 MB
External PhotosExternal Photos2026-01-14PDF 2.1 MB
Label and LocationID Label/Location Info2025-07-18PDF 148.4 KB
Test Setup PhotosTest Setup Photos2026-01-14PDF 1.6 MB
Antenna SpecificationTest Report2025-07-18PDF 207.4 KB
Antenna Specification 1Test Report2025-07-18PDF 1.4 MB
Antenna Specification 2Test Report2025-07-18PDF 207.4 KB
Test Data Appendix BLE Part 1Test Report2025-07-18PDF 5.6 MB
Test Data Appendix BLE Part 2Test Report2025-07-18PDF 5.5 MB
Test Data Appendix Part 1Test Report2025-07-18PDF 5.8 MB
Test Data Appendix Part 1Test Report2025-07-18PDF 4.6 MB
Test Data Appendix Part 2Test Report2025-07-18PDF 5.5 MB
Test Data Appendix Part 2Test Report2025-07-18PDF 5.7 MB
Test Data Appendix Part 3Test Report2025-07-18PDF 5.8 MB
Test Data Appendix Part 4Test Report2025-07-18PDF 5.8 MB
Test Data Appendix Part 5Test Report2025-07-18PDF 5.8 MB
Test Data Appendix Part 6Test Report2025-07-18PDF 5.7 MB
Test Data Appendix Part 7Test Report2025-07-18PDF 5.8 MB
Test Data Appendix Part 8Test Report2025-07-18PDF 5.5 MB
Test Data Appendix WIFI Part 1Test Report2025-07-18PDF 5.7 MB
Test Data Appendix WIFI Part 2Test Report2025-07-18PDF 5.8 MB
Test Data Appendix WIFI Part 3Test Report2025-07-18PDF 5.8 MB
Test Data Appendix WIFI Part 4Test Report2025-07-18PDF 5.8 MB
Test Data Appendix WIFI Part 5Test Report2025-07-18PDF 5.8 MB
Test Data Appendix WIFI Part 6Test Report2025-07-18PDF 3 MB
Test ReportTest Report2025-07-18PDF 1,007.2 KB
Test Report BLETest Report2025-07-18PDF 1 MB
Test Report Part 1Test Report2025-07-18PDF 2.6 MB
Test Report Part 2Test Report2025-07-18PDF 2.4 MB
Test Report WIFITest Report2025-07-18PDF 2 MB
Software Security InformationCover Letter(s)2025-07-18PDF 76 KB
Covered Equipment AttestationAttestation Statements2025-07-18PDF 74 KB
U.S. Agent Designation AttestationAttestation Statements2025-07-18PDF 351.2 KB
Agent Authorization LetterCover Letter(s)2025-07-18PDF 42 KB
Confidentiality LetterCover Letter(s)2025-07-18PDF 131.7 KB
RF Exposure EvaluationRF Exposure Info2025-07-18PDF 451.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 72.9 KB
Schematics Metadata onlySchematicsPDF 1.2 MB
Operational Description Metadata onlyOperational DescriptionPDF 620.9 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 2.1 MB

Application Information

Application IDwIJIFmfU58OYaT/tUPpV5A==
Final Action Date2025-07-18
Application PurposeOriginal Equipment
Applicant FRN0020332813
ModelETPPDRPP01
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device Description4PPoE-BLE WLAN Bridge
Responsible PartyJeong Inchang, Senior Research Engineer, ic.jeong@lginnotek.com , +82-62-950-0332
Test FirmKi Hong Nam, ONETECH Corp., kihong.nam@onetech.co.kr , 82-31-799-9580
TCB EmailTCB@nemko.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date01/14/2026
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is conducted. This device supports 20 and 40 MHz bandwidth modes. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
wIJIFmfU58OYaT/tUPpV5A==2025-07-18Original Equipment
lukWF9bcJs9zQi99ItMPvQ==2025-07-18Original Equipment
hMQcUjBupox65E+9hzEPLA==2025-07-18Original Equipment

Equipment Authorization

FrequencyOutputGrant Notes
2402-2480 MHz0.0114600CC
2402-2480 MHz0.00617CC
2412-2462 MHz0.12446CC, MO
5180-5240 MHz0.03963CC, MO
5260-5320 MHz0.04921CC, MO, ND
5500-5720 MHz0.07639CC, MO, ND
5745-5825 MHz0.07431CC, MO

Grants

TCB Grant - Application wIJIFmfU58OYaT/tUPpV5A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 07/18/2025

Application Dated: 07/18/2025
LG Innotek Co., Ltd.
30, Magokjungang 10-ro, Gangseo-gu
Seoul, 07796
South Korea
 
Attention: Jeong Inchang , Senior Research Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YZP-ETPPDRPP01
Name of Grantee:  LG Innotek Co., Ltd.
Equipment Class: Digital Transmission System
Notes: 4PPoE-BLE WLAN Bridge
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00617  
CC MO 15C 2412.0  -  2462.0 0.12446  

Output Power listed is conducted. This device supports 20 and 40 MHz bandwidth modes. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application lukWF9bcJs9zQi99ItMPvQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 07/18/2025

Application Dated: 07/18/2025
LG Innotek Co., Ltd.
30, Magokjungang 10-ro, Gangseo-gu
Seoul, 07796
South Korea
 
Attention: Jeong Inchang , Senior Research Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YZP-ETPPDRPP01
Name of Grantee:  LG Innotek Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: 4PPoE-BLE WLAN Bridge
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.03963  
CC MO ND 15E 5260.0  -  5320.0 0.04921  
CC MO ND 15E 5500.0  -  5720.0 0.07639  
CC MO 15E 5745.0  -  5825.0 0.07431  

Output Power listed is conducted. This device supports 20, 40 and 80 MHz bandwidth modes. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application hMQcUjBupox65E+9hzEPLA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 07/18/2025

Application Dated: 07/18/2025
LG Innotek Co., Ltd.
30, Magokjungang 10-ro, Gangseo-gu
Seoul, 07796
South Korea
 
Attention: Jeong Inchang , Senior Research Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YZP-ETPPDRPP01
Name of Grantee:  LG Innotek Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: 4PPoE-BLE WLAN Bridge
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01146  

Output Power listed is conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.