FCC ID YZP-RBHPB216C1

BT(V4.2) + WLAN(802.11a/b/g/n/ac) 2x2 MIMO Module

by LG Innotek Co., Ltd.

Grantee Code: YZP   Product Code: RBHPB216C1
Latest application date: 2021-02-02

FCC ID Device Details

FCC IDYZP-RBHPB216C1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeYZP
Product CodeRBHPB216C1
Applicant BusinessLG Innotek Co., Ltd. 🇰🇷
Related Domains lginnotek.com
Equipment ClassBT(V4.2) + WLAN(802.11a/b/g/n/ac) 2x2 MIMO Module
Test FirmONETECH Corp.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2021-02-02
2402-2480 MHzOriginal Equipment2021-02-02
2402-2480 MHzOriginal Equipment2021-02-02

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2021-08-02PDF 1.9 MB
User manualUsers Manual2021-08-02PDF 1.9 MB
Internal PhotosInternal Photos2021-08-02PDF 314 KB
Internal photosInternal Photos2021-08-02PDF 314 KB
External Photographs of EUTExternal Photos2021-08-02PDF 1.6 MB
External PhotosExternal Photos2021-08-02PDF 1.6 MB
External photosExternal Photos2021-08-02PDF 1.6 MB
LabelID Label/Location Info2021-02-02PDF 77.2 KB
labelID Label/Location Info2021-02-02PDF 77.2 KB
Test Setup PhotosTest Setup Photos2021-08-02PDF 1,014.3 KB
Test setup PhotosTest Setup Photos2021-08-02PDF 1,014.3 KB
Test ReportTest Report2021-02-02PDF 3.2 MB
Test ReportTest Report2021-02-02PDF 5.2 MB
Test reportTest Report2021-02-02PDF 328.3 KB
test reportTest Report2021-02-02PDF 1.5 MB
test reportTest Report2021-02-02PDF 4.5 MB
test reportTest Report2021-02-02PDF 5.5 MB
FCC Long Term Only Confidentiality Request Rev4.1Cover Letter(s)2021-02-02PDF 55.2 KB
FCC Short & Long Term Confidentiality RequestCover Letter(s)2021-02-02PDF 55.2 KB
FCC Software Configuration Control Declaration Rev1.1Cover Letter(s)2021-02-02PDF 23.1 KB
Letter of AuthorizationCover Letter(s)2021-02-02PDF 53.9 KB
Letter of Authorization Rev 2.0Cover Letter(s)2021-02-02PDF 53.9 KB
Model Difference DeclarationCover Letter(s)2021-02-02PDF 44.8 KB
RF ExposureRF Exposure Info2021-02-02PDF 328.3 KB
RF exposure reportRF Exposure Info2021-02-02PDF 328.3 KB
BLOCK Diagram Metadata onlyBlock DiagramPDF 128.7 KB
Block Diagram Metadata onlyBlock DiagramPDF 128.7 KB
SCH Metadata onlySchematicsPDF 406.9 KB
Schematics Metadata onlySchematicsPDF 406.9 KB
OP Metadata onlyOperational DescriptionPDF 211 KB
Operation Description Metadata onlyOperational DescriptionPDF 211 KB
FCC Software Security Requirements for UNII devices Metadata onlySDR Software/Security InfPDF 98.7 KB
Part List Metadata onlyParts List/Tune Up InfoPDF 74.7 KB
Parts list Metadata onlyParts List/Tune Up InfoPDF 74.7 KB
part List Metadata onlyParts List/Tune Up InfoPDF 74.7 KB

Application Information

Application IDqcyl/7GQv4162039EVSbRg==
Final Action Date2021-02-02
Application PurposeOriginal Equipment
Applicant FRN0020332813
ModelRBHPB216C1
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionBT(V4.2) + WLAN(802.11a/b/g/n/ac) 2x2 MIMO Module
Responsible PartyJeong Inchang, Senior Research Engineer, ic.jeong@lginnotek.com , +82-62-950-0332
Technical ContactLG Innotek Co., Ltd., ic.jeong@lginnotek.com
Test FirmKi Hong Nam, ONETECH Corp., kihong.nam@onetech.co.kr , 82-31-799-9580
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date08/02/2021
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

Applications

Application IDDatePurpose
qcyl/7GQv4162039EVSbRg==2021-02-02Original Equipment
Pmga8mYa40giV+NvD5Qe+g==2021-02-02Original Equipment
EwgWt/Z6oNxyAJJQAUe6Rg==2021-02-02Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.002500015CCC
2402-2480 MHz0.003515CCC
2412-2462 MHz0.04415CCC
5180-5240 MHz0.02715E38, CC, MO
5260-5320 MHz0.05715E38, CC, MO, ND
5500-5700 MHz0.06115E38, CC, MO, ND
5745-5825 MHz0.05715E38, CC, MO

Grants

TCB Grant - Application qcyl/7GQv4162039EVSbRg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 02/02/2021

Application Dated: 02/02/2021
LG Innotek Co., Ltd.
26, Hanamsandan 5beon-ro Gwangsan-gu
P.O. Box 506-731,
Gwangju, 506-731
South Korea
 
Attention: Jeong Inchang , Senior Research Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YZP-RBHPB216C1
Name of Grantee:  LG Innotek Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: BT(V4.2) + WLAN(802.11a/b/g/n/ac) 2x2 MIMO Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.027  
38 CC MO ND 15E 5260.0  -  5320.0 0.057  
38 CC MO ND 15E 5500.0  -  5700.0 0.061  
38 CC MO 15E 5745.0  -  5825.0 0.057  

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application qcyl/7GQv4162039EVSbRg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LG Innotek Co., Ltd.
26, Hanamsandan 5beon-ro Gwangsan-gu P.O. Box 506-731,
Gwangju, 506-731
South Korea
  Date of Grant: 02/02/2021

Application Dated: 02/02/2021
 
Attention: Jeong Inchang , Senior Research Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YZP-RBHPB216C1
Name of Grantee:  LG Innotek Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: BT(V4.2) + WLAN(802.11a/b/g/n/ac) 2x2 MIMO Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.027  
38 CC MO ND 15E 5260.0  -  5320.0 0.057  
38 CC MO ND 15E 5500.0  -  5700.0 0.061  
38 CC MO 15E 5745.0  -  5825.0 0.057  

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application Pmga8mYa40giV+NvD5Qe+g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 02/02/2021

Application Dated: 02/02/2021
LG Innotek Co., Ltd.
26, Hanamsandan 5beon-ro Gwangsan-gu
P.O. Box 506-731,
Gwangju, 506-731
South Korea
 
Attention: Jeong Inchang , Senior Research Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YZP-RBHPB216C1
Name of Grantee:  LG Innotek Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: BT(V4.2) + WLAN(802.11a/b/g/n/ac) 2x2 MIMO Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0025  

Single Modular Approval. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Pmga8mYa40giV+NvD5Qe+g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LG Innotek Co., Ltd.
26, Hanamsandan 5beon-ro Gwangsan-gu P.O. Box 506-731,
Gwangju, 506-731
South Korea
  Date of Grant: 02/02/2021

Application Dated: 02/02/2021
 
Attention: Jeong Inchang , Senior Research Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YZP-RBHPB216C1
Name of Grantee:  LG Innotek Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: BT(V4.2) + WLAN(802.11a/b/g/n/ac) 2x2 MIMO Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0025  

Single Modular Approval. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application EwgWt/Z6oNxyAJJQAUe6Rg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 02/02/2021

Application Dated: 02/02/2021
LG Innotek Co., Ltd.
26, Hanamsandan 5beon-ro Gwangsan-gu
P.O. Box 506-731,
Gwangju, 506-731
South Korea
 
Attention: Jeong Inchang , Senior Research Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YZP-RBHPB216C1
Name of Grantee:  LG Innotek Co., Ltd.
Equipment Class: Digital Transmission System
Notes: BT(V4.2) + WLAN(802.11a/b/g/n/ac) 2x2 MIMO Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.044  
CC 15C 2402.0  -  2480.0 0.0035  

Single Modular Approval. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application EwgWt/Z6oNxyAJJQAUe6Rg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LG Innotek Co., Ltd.
26, Hanamsandan 5beon-ro Gwangsan-gu P.O. Box 506-731,
Gwangju, 506-731
South Korea
  Date of Grant: 02/02/2021

Application Dated: 02/02/2021
 
Attention: Jeong Inchang , Senior Research Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  YZP-RBHPB216C1
Name of Grantee:  LG Innotek Co., Ltd.
Equipment Class: Digital Transmission System
Notes: BT(V4.2) + WLAN(802.11a/b/g/n/ac) 2x2 MIMO Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.044  
CC 15C 2402.0  -  2480.0 0.0035  

Single Modular Approval. Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: