FCC ID Z28-101213-RM

Digital Signage & POS System

by ZUNIDATA SYSTEMS, INC

Grantee Code: Z28   Product Code: 101213RM
Latest application date: 2019-06-11

FCC ID Device Details

FCC IDZ28-101213-RM
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeZ28
Product Code101213RM
Applicant BusinessZUNIDATA SYSTEMS, INC 🇹🇼
Related Domains zunidata.com isl.com.tw
Equipment ClassDigital Signage & POS System
Test FirmInternational Standards Laboratory Corp.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2019-06-11
2402-2480 MHzOriginal Equipment2019-06-11
2402-2480 MHzOriginal Equipment2019-06-11

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2019-06-11PDF 4.5 MB
Internal PhotosInternal Photos2019-06-11PDF 571.5 KB
External PhotosExternal Photos2019-06-11PDF 3.4 MB
ID Label/Location InfoID Label/Location Info2019-06-11PDF 115.8 KB
Test Setup Photos_NIITest Setup Photos2019-06-11PDF 428.4 KB
Test Report_DSSTest Report2019-06-11PDF 2.2 MB
Test Report_DTSTest Report2019-06-11PDF 2.9 MB
Test Report_NIITest Report2019-06-11PDF 5.7 MB
Attestation LetterCover Letter(s)2019-06-11PDF 15.9 KB
Declaration Letter - P15B DoCCover Letter(s)2019-06-11PDF 13.1 KB
Declaration Letter - P15B DoCCover Letter(s)2019-06-11PDF 13.1 KB
Declaration of AuthorizationCover Letter(s)2019-06-11PDF 62.4 KB
WIFI_AnteenaCover Letter(s)2019-06-11PDF 3.5 MB
WIFI_AnteenaCover Letter(s)2019-06-11PDF 3.5 MB
WIFI_Anteena-rev.1Cover Letter(s)2019-06-11PDF 3.5 MB
confidentialityCover Letter(s)2019-06-11PDF 92.6 KB
MPE ReportRF Exposure Info2019-06-11PDF 90.5 KB
10P-RM_BlockDigram_no HDMI Metadata onlyBlock DiagramPDF 15.3 KB
12P-RM_BlockDigram Metadata onlyBlock DiagramPDF 57.9 KB
13P-RM_BlockDigram Metadata onlyBlock DiagramPDF 49.3 KB
Schematics Metadata onlySchematicsPDF 283.5 KB
Operational Description Metadata onlyOperational DescriptionPDF 80.2 KB
Operational Description_Software Security Metadata onlyOperational DescriptionPDF 388.1 KB

Application Information

Application IDd/Mph32/7vNzgtNiGllIPA==
Final Action Date2019-06-11
Application PurposeOriginal Equipment
Applicant FRN0021171202
Model101213-RM
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionDigital Signage & POS System
Responsible PartyLong Cheng, Section Manager, long.cheng@zunidata.com , 886-3-6676026
Technical ContactDino Chen, International Standards Laboratoty Corp., dino_chen@isl.com.tw , 886-3-4071718
Non-Technical ContactDino Chen, International Standards Laboratoty Corp., dino_chen@isl.com.tw , 886-3-4071718
Test FirmAngus Chu, International Standards Laboratory Corp., angus_chu@isl.com.tw , 886-3-263-8888
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance. This device has 20 /40 /80 MHz bandwidth mode.

Applications

Application IDDatePurpose
d/Mph32/7vNzgtNiGllIPA==2019-06-11Original Equipment
M8/DJc4rOflGrs58m8NVRQ==2019-06-11Original Equipment
LeceJ/OQ0zmyE3qpONlugQ==2019-06-11Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.003315CCC
2402-2480 MHz0.000550015CCC
2412-2462 MHz0.3315CCC
5180-5240 MHz0.01715ECC
5260-5320 MHz0.01715ECC, ND
5500-5700 MHz0.01615ECC, ND
5745-5825 MHz0.01415ECC

Grants

TCB Grant - Application M8/DJc4rOflGrs58m8NVRQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 06/11/2019

Application Dated: 06/04/2019
ZUNIDATA SYSTEMS, INC
6F, No. 945, Boai Street, Jubei City,
Hsinchu, 302
Taiwan
 
Attention: Long Cheng , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z28-101213-RM
Name of Grantee:  ZUNIDATA SYSTEMS, INC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Digital Signage & POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00055  

Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application M8/DJc4rOflGrs58m8NVRQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ZUNIDATA SYSTEMS, INC
6F, No. 945, Boai Street, Jubei City,
Hsinchu, 302
Taiwan
  Date of Grant: 06/11/2019

Application Dated: 06/04/2019
 
Attention: Long Cheng , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z28-101213-RM
Name of Grantee:  ZUNIDATA SYSTEMS, INC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Digital Signage & POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00055  

Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application LeceJ/OQ0zmyE3qpONlugQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 06/11/2019

Application Dated: 06/04/2019
ZUNIDATA SYSTEMS, INC
6F, No. 945, Boai Street, Jubei City,
Hsinchu, 302
Taiwan
 
Attention: Long Cheng , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z28-101213-RM
Name of Grantee:  ZUNIDATA SYSTEMS, INC
Equipment Class: Digital Transmission System
Notes: Digital Signage & POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0033  
CC 15C 2412.0  -  2462.0 0.33  

Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance.

This device has 20 /40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application LeceJ/OQ0zmyE3qpONlugQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ZUNIDATA SYSTEMS, INC
6F, No. 945, Boai Street, Jubei City,
Hsinchu, 302
Taiwan
  Date of Grant: 06/11/2019

Application Dated: 06/04/2019
 
Attention: Long Cheng , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z28-101213-RM
Name of Grantee:  ZUNIDATA SYSTEMS, INC
Equipment Class: Digital Transmission System
Notes: Digital Signage & POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0033  
CC 15C 2412.0  -  2462.0 0.33  

Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance.

This device has 20 /40 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application d/Mph32/7vNzgtNiGllIPA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 06/11/2019

Application Dated: 06/04/2019
ZUNIDATA SYSTEMS, INC
6F, No. 945, Boai Street, Jubei City,
Hsinchu, 302
Taiwan
 
Attention: Long Cheng , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z28-101213-RM
Name of Grantee:  ZUNIDATA SYSTEMS, INC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Digital Signage & POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.017  
CC ND 15E 5260.0  -  5320.0 0.017  
CC ND 15E 5500.0  -  5700.0 0.016  
CC 15E 5745.0  -  5825.0 0.014  

Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance.

This device has 20 /40 /80 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application d/Mph32/7vNzgtNiGllIPA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

ZUNIDATA SYSTEMS, INC
6F, No. 945, Boai Street, Jubei City,
Hsinchu, 302
Taiwan
  Date of Grant: 06/11/2019

Application Dated: 06/04/2019
 
Attention: Long Cheng , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z28-101213-RM
Name of Grantee:  ZUNIDATA SYSTEMS, INC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Digital Signage & POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.017  
CC ND 15E 5260.0  -  5320.0 0.017  
CC ND 15E 5500.0  -  5700.0 0.016  
CC 15E 5745.0  -  5825.0 0.014  

Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance.

This device has 20 /40 /80 MHz bandwidth mode.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: