1. FCC ID
  2. Z28
  3. Z28-7N-7F-RM

FCC ID Z28-7N-7F-RM

Digital Signage / POS System

by ZUNIDATA SYSTEMS, INC

Grantee Code: Z28   Product Code: 7N7FRM
Latest application date: 2020-12-01

FCC ID Device Details

FCC IDZ28-7N-7F-RM
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeZ28
Product Code7N7FRM
Applicant BusinessZUNIDATA SYSTEMS, INC 🇹🇼
Related Domains zunidata.com isl.com.tw
Equipment ClassDigital Signage / POS System
Test FirmInternational Standards Laboratory Corp.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2020-12-01
5180-5240 MHzOriginal Equipment2020-12-01
2402-2480 MHzOriginal Equipment2020-12-01

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2020-12-01PDF 1.9 MB
Internal PhotosInternal Photos2020-12-01PDF 968.1 KB
External PhotosExternal Photos2020-12-01PDF 1.2 MB
ID Label/Location InfoID Label/Location Info2020-12-01PDF 159 KB
Test Setup PhotosTest Setup Photos2020-12-01PDF 481 KB
Test Setup PhotosTest Setup Photos2020-12-01PDF 551.1 KB
Test Report_DSSTest Report2020-12-01PDF 2.4 MB
Test Report_DTSTest Report2020-12-01PDF 2 MB
Test Report_DTS RevisedTest Report2020-12-01PDF 2.9 MB
Test Report_NII_Part 1Test Report2020-12-01PDF 5.2 MB
Test Report_NII_Part 1 RevisedTest Report2020-12-01PDF 5.2 MB
Test Report_NII_Part 2Test Report2020-12-01PDF 1 MB
Attestation LetterCover Letter(s)2020-12-01PDF 261.5 KB
Declaration of authorizationCover Letter(s)2020-12-01PDF 197.7 KB
confidentialityCover Letter(s)2020-12-01PDF 332.9 KB
MPERF Exposure Info2020-12-01PDF 92.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 15.5 KB
Schematics Metadata onlySchematicsPDF 452.6 KB
NII Software Security Info Metadata onlyOperational DescriptionPDF 1.2 MB
Operational Description Metadata onlyOperational DescriptionPDF 48.4 KB

Application Information

Application IDeFo1xL07zULSshPkZw2lfw==
Final Action Date2020-12-01
Application PurposeOriginal Equipment
Applicant FRN0021171202
Model7N-7F-RM
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionDigital Signage / POS System
Responsible PartyLong Cheng, Section Manager, long.cheng@zunidata.com , 886-3-6676026
Technical ContactJerry Liu, International Standards Laboratory Corp., Jerry_CF_Liu@isl.com.tw , 886-3-4071718
Non-Technical ContactJerry Liu, International Standards Laboratory Corp., Jerry_CF_Liu@isl.com.tw , 886-3-4071718
Test FirmAngus Chu, International Standards Laboratory Corp., angus_chu@isl.com.tw , 886-3-263-8888
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
eFo1xL07zULSshPkZw2lfw==2020-12-01Original Equipment
TRgI168QgZa7EkGNCEnoRg==2020-12-01Original Equipment
1wiYVKozldxRP1G1SgiNiw==2020-12-01Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.001200015CCC
2402-2480 MHz0.001815CCC
2412-2462 MHz0.2315CCC
5180-5240 MHz0.06215ECC
5260-5320 MHz0.05615ECC, ND
5500-5700 MHz0.05215ECC, ND
5745-5825 MHz0.05415ECC

Grants

TCB Grant - Application TRgI168QgZa7EkGNCEnoRg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands 		Date of Grant: 12/01/2020

Application Dated: 11/24/2020
ZUNIDATA SYSTEMS, INC
6F, No. 945, Boai Street, Jubei City,
Hsinchu, 302
Taiwan
 
Attention: Long Cheng , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z28-7N-7F-RM
Name of Grantee:  ZUNIDATA SYSTEMS, INC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Digital Signage / POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.062  
CC ND 15E 5260.0  -  5320.0 0.056  
CC ND 15E 5500.0  -  5700.0 0.052  
CC 15E 5745.0  -  5825.0 0.054  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application TRgI168QgZa7EkGNCEnoRg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

ZUNIDATA SYSTEMS, INC
6F, No. 945, Boai Street, Jubei City,
Hsinchu, 302
Taiwan 		  Date of Grant: 12/01/2020

Application Dated: 11/24/2020
 
Attention: Long Cheng , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z28-7N-7F-RM
Name of Grantee:  ZUNIDATA SYSTEMS, INC
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Digital Signage / POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.062  
CC ND 15E 5260.0  -  5320.0 0.056  
CC ND 15E 5500.0  -  5700.0 0.052  
CC 15E 5745.0  -  5825.0 0.054  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application eFo1xL07zULSshPkZw2lfw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands 		Date of Grant: 12/01/2020

Application Dated: 11/24/2020
ZUNIDATA SYSTEMS, INC
6F, No. 945, Boai Street, Jubei City,
Hsinchu, 302
Taiwan
 
Attention: Long Cheng , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z28-7N-7F-RM
Name of Grantee:  ZUNIDATA SYSTEMS, INC
Equipment Class: Digital Transmission System
Notes: Digital Signage / POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0018  
CC 15C 2412.0  -  2462.0 0.23  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application eFo1xL07zULSshPkZw2lfw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

ZUNIDATA SYSTEMS, INC
6F, No. 945, Boai Street, Jubei City,
Hsinchu, 302
Taiwan 		  Date of Grant: 12/01/2020

Application Dated: 11/24/2020
 
Attention: Long Cheng , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z28-7N-7F-RM
Name of Grantee:  ZUNIDATA SYSTEMS, INC
Equipment Class: Digital Transmission System
Notes: Digital Signage / POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0018  
CC 15C 2412.0  -  2462.0 0.23  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 1wiYVKozldxRP1G1SgiNiw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands 		Date of Grant: 12/01/2020

Application Dated: 11/24/2020
ZUNIDATA SYSTEMS, INC
6F, No. 945, Boai Street, Jubei City,
Hsinchu, 302
Taiwan
 
Attention: Long Cheng , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z28-7N-7F-RM
Name of Grantee:  ZUNIDATA SYSTEMS, INC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Digital Signage / POS System
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0012  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 1wiYVKozldxRP1G1SgiNiw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

ZUNIDATA SYSTEMS, INC
6F, No. 945, Boai Street, Jubei City,
Hsinchu, 302
Taiwan 		  Date of Grant: 12/01/2020

Application Dated: 11/24/2020
 
Attention: Long Cheng , Section Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z28-7N-7F-RM
Name of Grantee:  ZUNIDATA SYSTEMS, INC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Digital Signage / POS System
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0012  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: