FCC ID Z4T-BVA23060V1

BeagleV-Ahead with WiFi and Bluetooth

by Seeed Technology Co., Ltd.

Grantee Code: Z4T   Product Code: BVA23060V1
Latest application date: 2023-08-02

FCC ID Device Details

FCC IDZ4T-BVA23060V1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeZ4T
Product CodeBVA23060V1
Applicant BusinessSeeed Technology Co., Ltd. 🇨🇳
Related Domains seeed.cc
Equipment ClassBeagleV-Ahead with WiFi and Bluetooth
Test FirmShenzhen Morlab Communications Technology Co. Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2023-08-02
5745-5825 MHzOriginal Equipment2023-08-02
2412-2472 MHzOriginal Equipment2023-08-02

Exhibits

DocumentTypeAvailableFile
UserManualUsers Manual2024-01-30PDF 4.2 MB
InternalPhotosInternal Photos2024-01-30PDF 1.2 MB
ExternalPhotosExternal Photos2024-01-30PDF 613.3 KB
Label_LabelLocationID Label/Location Info2023-08-02PDF 268.7 KB
TestSetupPhotos_DSSTest Setup Photos2024-01-30PDF 618.3 KB
TestSetupPhotos_DTSTest Setup Photos2024-01-30PDF 617.2 KB
TestSetupPhotos_NIITest Setup Photos2024-01-30PDF 615.4 KB
Ant_specTest Report2023-08-02PDF 3.3 MB
SZ23060270W01_BLE_DTSTest Report2023-08-02PDF 3.1 MB
SZ23060270W02_BTclassic_DSSTest Report2023-08-02PDF 5.5 MB
SZ23060270W03_WiFi_DTSTest Report2023-08-02PDF 4.3 MB
SZ23060270W04_WiFi5G_NIITest Report2023-08-02PDF 2.6 MB
FCC_AttestationLetter_COVERED_EQUIPMENTAttestation Statements2023-08-02PDF 221.7 KB
FCC_Attestation_Letter_US_AGENTAttestation Statements2023-08-02PDF 102.8 KB
AuthorizationLetterCover Letter(s)2023-08-02PDF 273.1 KB
ConfidentialityRequestLetterCover Letter(s)2023-08-02PDF 383.9 KB
ModularApprovalChecklistCover Letter(s)2023-08-02PDF 275.2 KB
SZ23060270S01_RFExposureRF Exposure Info2023-08-02PDF 389.3 KB
BlockDiagram Metadata onlyBlock DiagramPDF 69.5 KB
AP6203BM_schematic Metadata onlySchematicsPDF 101.9 KB
Schematic Metadata onlySchematicsPDF 1.8 MB
OperationalDescription Metadata onlyOperational DescriptionPDF 125.4 KB
Software_Security_Info Metadata onlySDR Software/Security InfPDF 94.8 KB
AP6203BM_BOM-Module Metadata onlyParts List/Tune Up InfoPDF 42 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 123.7 KB

Application Information

Application IDQ7RBfv05jC5gFR6reyo5ZA==
Final Action Date2023-08-02
Application PurposeOriginal Equipment
Applicant FRN0021918081
ModelBVA23060V1
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionBeagleV-Ahead with WiFi and Bluetooth
Responsible PartyAlbert Miao, R&D; Director, albert.miao@seeed.cc , 86 0755-33162243
Test FirmMr. Su Feng, Shenzhen Morlab Communications Technology Co. Ltd., Zx.sun@morlab.cn , +86 755 36698566
TCB Emailbentje.holger@phoenix-testlab.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date01/30/2024
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power is maximum peak conducted.This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID.Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4).

Applications

Application IDDatePurpose
Q7RBfv05jC5gFR6reyo5ZA==2023-08-02Original Equipment
Hg5mDFC1igDX7pILj6YW6g==2023-08-02Original Equipment
EPOUR9qhX4cWkILEk4D8Ew==2023-08-02Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.005415CCC
2402-2480 MHz0.000500015CCC
2412-2472 MHz0.064715CCC
5180-5240 MHz0.011115ECC
5745-5825 MHz0.016815ECC

Grants

TCB Grant - Application Q7RBfv05jC5gFR6reyo5ZA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 08/02/2023

Application Dated: 08/02/2023
Seeed Technology Co., Ltd.
9F, G3 Building, TCL International E City,
Zhongshanyuan Road,Nanshan District
Shenzhen, 518055
China
 
Attention: Albert Miao , R&D Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z4T-BVA23060V1
Name of Grantee:  Seeed Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: BeagleV-Ahead with WiFi and Bluetooth
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0005  

Output power is maximum peak conducted.
This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID.
Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4).

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Q7RBfv05jC5gFR6reyo5ZA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Seeed Technology Co., Ltd.
9F, G3 Building, TCL International E City, Zhongshanyuan Road,Nanshan District
Shenzhen, 518055
China
  Date of Grant: 08/02/2023

Application Dated: 08/02/2023
 
Attention: Albert Miao , R&D Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z4T-BVA23060V1
Name of Grantee:  Seeed Technology Co., Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: BeagleV-Ahead with WiFi and Bluetooth
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0005  

Output power is maximum peak conducted.
This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID.
Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4).


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Hg5mDFC1igDX7pILj6YW6g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 08/02/2023

Application Dated: 08/02/2023
Seeed Technology Co., Ltd.
9F, G3 Building, TCL International E City,
Zhongshanyuan Road,Nanshan District
Shenzhen, 518055
China
 
Attention: Albert Miao , R&D Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z4T-BVA23060V1
Name of Grantee:  Seeed Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: BeagleV-Ahead with WiFi and Bluetooth
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0111  
CC 15E 5745.0  -  5825.0 0.0168  

Output power is maximum average conducted.
This device supports IEEE 802.11 a/n 20 MHz channel bandwidths.
This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID.
Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4).

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application Hg5mDFC1igDX7pILj6YW6g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Seeed Technology Co., Ltd.
9F, G3 Building, TCL International E City, Zhongshanyuan Road,Nanshan District
Shenzhen, 518055
China
  Date of Grant: 08/02/2023

Application Dated: 08/02/2023
 
Attention: Albert Miao , R&D Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z4T-BVA23060V1
Name of Grantee:  Seeed Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: BeagleV-Ahead with WiFi and Bluetooth
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0111  
CC 15E 5745.0  -  5825.0 0.0168  

Output power is maximum average conducted.
This device supports IEEE 802.11 a/n 20 MHz channel bandwidths.
This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID.
Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4).


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application EPOUR9qhX4cWkILEk4D8Ew==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 08/02/2023

Application Dated: 08/02/2023
Seeed Technology Co., Ltd.
9F, G3 Building, TCL International E City,
Zhongshanyuan Road,Nanshan District
Shenzhen, 518055
China
 
Attention: Albert Miao , R&D Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z4T-BVA23060V1
Name of Grantee:  Seeed Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: BeagleV-Ahead with WiFi and Bluetooth
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0054  
CC 15C 2412.0  -  2472.0 0.0647  

Output power is maximum peak conducted.
This device supports IEEE 802.11 b/g/n20 MHz channel bandwidths.
This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID.
Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4).

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application EPOUR9qhX4cWkILEk4D8Ew==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Seeed Technology Co., Ltd.
9F, G3 Building, TCL International E City, Zhongshanyuan Road,Nanshan District
Shenzhen, 518055
China
  Date of Grant: 08/02/2023

Application Dated: 08/02/2023
 
Attention: Albert Miao , R&D Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z4T-BVA23060V1
Name of Grantee:  Seeed Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: BeagleV-Ahead with WiFi and Bluetooth
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0054  
CC 15C 2412.0  -  2472.0 0.0647  

Output power is maximum peak conducted.
This device supports IEEE 802.11 b/g/n20 MHz channel bandwidths.
This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID.
Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4).


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: