FCC ID Z4T-WM1302-A

FCC ID	Z4T-WM1302-A
Mirrors	fcc.id \| gov \| fccid.ai
Grantee Code	Z4T
Product Code	WM1302A
Applicant Business	Seeed Technology Co., Ltd. 🇨🇳
Related Domains	seeed.cc
Equipment Class	WM1302 LoRaWAN Gateway Module(SPI) - US915
Test Firm	Shenzhen Anbotek Compliance Laboratory Limited

Frequency Range	Application Purpose	Final Action Date
923.3-927.5 MHz	Class II permissive change or modification of presently authorized equipment	2021-07-15
923.3-927.5 MHz	Class II permissive change or modification of presently authorized equipment	2021-07-15
923.3-927.5 MHz	Class II permissive change or modification of presently authorized equipment	2021-06-03
923.3-927.5 MHz	Original Equipment	2021-04-20

Document	Type	Available	File
User Manual	Users Manual	2021-07-15	PDF 832.6 KB
Internal Photos	Internal Photos	2021-07-15	PDF 247 KB
Internal Photos	Internal Photos	2021-07-15	PDF 205.5 KB
Int photo	Internal Photos	2021-06-03	PDF 207 KB
Internal_Photos	Internal Photos	2021-04-20	PDF 251.7 KB
External Photos	External Photos	2021-07-15	PDF 714.4 KB
External Photos	External Photos	2021-07-15	PDF 529.5 KB
Ext photo	External Photos	2021-06-03	PDF 558.6 KB
Ext_Photos	External Photos	2021-04-20	PDF 719 KB
Label	ID Label/Location Info	2021-07-15	PDF 156.2 KB
label_and_label_location	ID Label/Location Info	2021-07-15	PDF 155.9 KB
label	ID Label/Location Info	2021-06-03	PDF 155.9 KB
Label_and_Label_Location	ID Label/Location Info	2021-04-20	PDF 155.9 KB
Test Setup Photos	Test Setup Photos	2021-07-15	PDF 256 KB
Test Setup Photos	Test Setup Photos	2021-07-15	PDF 256 KB
test setup photo	Test Setup Photos	2021-06-03	PDF 256 KB
Test_Setup_photos	Test Setup Photos	2021-04-20	PDF 260.6 KB
Test Report	Test Report	2021-07-15	PDF 2.1 MB
Test Report	Test Report	2021-07-15	PDF 2.1 MB
Test report	Test Report	2021-06-03	PDF 2.1 MB
Report 15.247	Test Report	2021-04-20	PDF 3.2 MB
FCC Agent Authorization Letter	Cover Letter(s)	2021-07-15	PDF 47.9 KB
FCC Agent Authorization Letter	Cover Letter(s)	2021-07-15	PDF 48.2 KB
FCC Class II PC request letter Rev1.1	Cover Letter(s)	2021-07-15	PDF 118.2 KB
FCC Class II PC request letter Rev1.1	Cover Letter(s)	2021-07-15	PDF 118.2 KB
FCC Modular Approval Request Rev 3.0	Cover Letter(s)	2021-07-15	PDF 66.8 KB
FCC Short & Long Term Confidentiality Request Rev4.1	Cover Letter(s)	2021-07-15	PDF 53.3 KB
FCC_Short & Long Term Confidentiality Request[CCIC118	Cover Letter(s)	2021-07-15	PDF 53.6 KB
Agent Authorization	Cover Letter(s)	2021-06-03	PDF 54.5 KB
FCC Class II PC request letter	Cover Letter(s)	2021-06-03	PDF 119.8 KB
FCC Modular Approval Request Rev 3.0	Cover Letter(s)	2021-04-20	PDF 66.7 KB
FCC_Short_&_Long_Term_Confidentiality_Request	Cover Letter(s)	2021-04-20	PDF 53.3 KB
Letter_of_Authorization	Cover Letter(s)	2021-04-20	PDF 54.7 KB
MPE	RF Exposure Info	2021-07-15	PDF 104.5 KB
MPE	RF Exposure Info	2021-07-15	PDF 104.5 KB
MPE_report	RF Exposure Info	2021-04-20	PDF 104.1 KB
Block Diagram Metadata only	Block Diagram		PDF 179.4 KB
Schematic Metadata only	Schematics		PDF 977 KB
OP Metadata only	Operational Description		PDF 194.5 KB
Operation_Description Metadata only	Operational Description		PDF 145.2 KB

Application ID	gEJ6chVDSsyVwFiUfXwFmg==
Final Action Date	2021-07-15
Application Purpose	Class II permissive change or modification of presently authorized equipment
Applicant FRN	0021206271
Model	WM1302-A
Frequency Range	923.3-927.5 MHz
Equipment Class	DTS - Digital Transmission System
Device Description	WM1302 LoRaWAN Gateway Module(SPI) - US915
Responsible Party	Albert Miao, R&D; Director, albert.miao@seeed.cc , 86 0755-33162243
Technical Contact	Seeed Technology Co., Ltd., albert.miao@seeed.cc
Test Firm	Jeff Zhu, Shenzhen Anbotek Compliance Laboratory Limited, jeff.zhu@anbotek.com , 86-755-26064492
TCB Email	certification@micomlabs.com
TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term Confidentiality	No
Long-Term Confidentiality	Yes
Grant Deferral	No
Modular Equipment	Single Modular Approval
Composite Device	No
Composite Part	No
Cognitive Radio	No
Authorization Waiver	No
Authorization Waiver Approved	No
Section 5301 Certification	Yes
Related OET Knowledge DataBase Inquiry	No
Grant Comments	Class II permissive change is for this filling. Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Application ID	Date	Purpose
gEJ6chVDSsyVwFiUfXwFmg==	2021-07-15	Class II permissive change or modification of presently authorized equipment
Ki1ojwpy0DFDjpuwkDJRKA==	2021-07-15	Class II permissive change or modification of presently authorized equipment
pvP7mvCZHc/OurgAB0e0+A==	2021-06-03	Class II permissive change or modification of presently authorized equipment
pmn9TdNn8A4I1bTOyJlbQQ==	2021-04-20	Original Equipment

Frequency	Output	Rules
923.3-927.5 MHz	0.2222000	15C

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566

Date of Grant: 06/03/2021

Application Dated: 06/03/2021

Seeed Technology Co., Ltd.

9F, G3 Building, TCL International E City,

Zhongshanyuan Road,Nanshan District

Shenzhen, 518055
China

Attention: Albert Miao , R&D Director

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z4T-WM1302-A

Name of Grantee:	Seeed Technology Co., Ltd.

Equipment Class:	Digital Transmission System
Notes:	WM1302 LoRaWAN Gateway Module(SPI) - US915
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	923.3 - 927.5	0.2222

Class II permissive change is for this filling. Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Seeed Technology Co., Ltd.
9F, G3 Building, TCL International E City, Zhongshanyuan Road,Nanshan District
Shenzhen, 518055
China

Date of Grant: 06/03/2021

Application Dated: 06/03/2021

Attention: Albert Miao , R&D Director

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z4T-WM1302-A

Name of Grantee:	Seeed Technology Co., Ltd.

Equipment Class:	Digital Transmission System
Notes:	WM1302 LoRaWAN Gateway Module(SPI) - US915
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	923.3 - 927.5	0.2222

Class II permissive change is for this filling. Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

TCB Grant - Application pmn9TdNn8A4I1bTOyJlbQQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566

Date of Grant: 04/20/2021

Application Dated: 04/20/2021

Seeed Technology Co., Ltd.

9F, G3 Building, TCL International E City,

Zhongshanyuan Road,Nanshan District

Shenzhen, 518055
China

Attention: Albert Miao , R&D Director

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z4T-WM1302-A

Name of Grantee:	Seeed Technology Co., Ltd.

Equipment Class:	Digital Transmission System
Notes:	WM1302 LoRaWAN Gateway Module(SPI) - US915
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	923.3 - 927.5	0.2222

Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Seeed Technology Co., Ltd.
9F, G3 Building, TCL International E City, Zhongshanyuan Road,Nanshan District
Shenzhen, 518055
China

Date of Grant: 04/20/2021

Application Dated: 04/20/2021

Attention: Albert Miao , R&D Director

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z4T-WM1302-A

Name of Grantee:	Seeed Technology Co., Ltd.

Equipment Class:	Digital Transmission System
Notes:	WM1302 LoRaWAN Gateway Module(SPI) - US915
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	923.3 - 927.5	0.2222

Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

TCB Grant - Application Ki1ojwpy0DFDjpuwkDJRKA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566

Date of Grant: 07/15/2021

Application Dated: 07/15/2021

Seeed Technology Co., Ltd.

9F, G3 Building, TCL International E City,

Zhongshanyuan Road,Nanshan District

Shenzhen, 518055
China

Attention: Albert Miao , R&D Director

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z4T-WM1302-A

Name of Grantee:	Seeed Technology Co., Ltd.

Equipment Class:	Digital Transmission System
Notes:	WM1302 LoRaWAN Gateway Module(SPI) - US915
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	923.3 - 927.5	0.2222

Class II permissive change is for this filling. Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Seeed Technology Co., Ltd.
9F, G3 Building, TCL International E City, Zhongshanyuan Road,Nanshan District
Shenzhen, 518055
China

Date of Grant: 07/15/2021

Application Dated: 07/15/2021

Attention: Albert Miao , R&D Director

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z4T-WM1302-A

Name of Grantee:	Seeed Technology Co., Ltd.

Equipment Class:	Digital Transmission System
Notes:	WM1302 LoRaWAN Gateway Module(SPI) - US915
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	923.3 - 927.5	0.2222

Class II permissive change is for this filling. Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

TCB Grant - Application gEJ6chVDSsyVwFiUfXwFmg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566

Date of Grant: 07/15/2021

Application Dated: 07/15/2021

Seeed Technology Co., Ltd.

9F, G3 Building, TCL International E City,

Zhongshanyuan Road,Nanshan District

Shenzhen, 518055
China

Attention: Albert Miao , R&D Director

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z4T-WM1302-A

Name of Grantee:	Seeed Technology Co., Ltd.

Equipment Class:	Digital Transmission System
Notes:	WM1302 LoRaWAN Gateway Module(SPI) - US915
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	923.3 - 927.5	0.2222

Class II permissive change is for this filling. Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Seeed Technology Co., Ltd.
9F, G3 Building, TCL International E City, Zhongshanyuan Road,Nanshan District
Shenzhen, 518055
China

Date of Grant: 07/15/2021

Application Dated: 07/15/2021

Attention: Albert Miao , R&D Director

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z4T-WM1302-A

Name of Grantee:	Seeed Technology Co., Ltd.

Equipment Class:	Digital Transmission System
Notes:	WM1302 LoRaWAN Gateway Module(SPI) - US915
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	923.3 - 927.5	0.2222

Class II permissive change is for this filling. Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Mail To:

WM1302 LoRaWAN Gateway Module(SPI) - US915

by Seeed Technology Co., Ltd.

Grantee Code: Z4T Product Code: WM1302A

Latest application date: 2021-07-15

FCC ID Device Details

Operating Frequencies

Exhibits

Application Information

Applications

Equipment Authorization

Grants

TCB Grant - Application pvP7mvCZHc/OurgAB0e0+A==

EAS Grant - Application pvP7mvCZHc/OurgAB0e0+A==

TCB Grant - Application pmn9TdNn8A4I1bTOyJlbQQ==

EAS Grant - Application pmn9TdNn8A4I1bTOyJlbQQ==

TCB Grant - Application Ki1ojwpy0DFDjpuwkDJRKA==

EAS Grant - Application Ki1ojwpy0DFDjpuwkDJRKA==

TCB Grant - Application gEJ6chVDSsyVwFiUfXwFmg==

EAS Grant - Application gEJ6chVDSsyVwFiUfXwFmg==