FCC ID Z64-CC3000EM
CC3000EM 802.11b/g Module
by Texas Instruments Incorporated
Grantee Code: Z64 Product Code: CC3000EM
Latest application date: 2015-08-13
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2015-08-13 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2012-12-14 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: WS2-WG1300E00 Grant Date: 07/10/2012 | 2012-12-06 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| user manual | Users Manual | 2012-12-14 | PDF 3.5 MB |
| internal photos | Internal Photos | 2012-12-14 | PDF 344.5 KB |
| C2PC photo | External Photos | 2012-12-14 | PDF 126 KB |
| external photos | External Photos | 2012-12-06 | PDF 302.7 KB |
| label and location | ID Label/Location Info | 2012-12-14 | PDF 325.5 KB |
| label and location | ID Label/Location Info | 2012-12-06 | PDF 378 KB |
| SAR Test Setup Photos | Test Setup Photos | 2015-08-13 | PDF 385.4 KB |
| Test Setup Photos | Test Setup Photos | 2015-08-13 | PDF 634.8 KB |
| Test Report | Test Report | 2015-08-13 | PDF 1.1 MB |
| Agents Letter | Cover Letter(s) | 2015-08-13 | PDF 239.1 KB |
| C2PC Letter | Cover Letter(s) | 2015-08-13 | PDF 18.4 KB |
| Test Data Letter | Cover Letter(s) | 2015-08-13 | PDF 175.2 KB |
| agent letter | Cover Letter(s) | 2012-12-14 | PDF 151.2 KB |
| permissive change letter | Cover Letter(s) | 2012-12-14 | PDF 355.3 KB |
| authorization letter | Cover Letter(s) | 2012-12-06 | PDF 13.9 KB |
| change letter | Cover Letter(s) | 2012-12-06 | PDF 754.5 KB |
| RF Exposure Report | RF Exposure Info | 2015-08-13 | PDF 4.1 MB |
| Tune Up | Parts List/Tune Up Info | 2015-08-13 | PDF 330.4 KB |
Application Information
| Application ID | nAjPDl57g+nYlJY7oFY/0w== |
|---|---|
| Final Action Date | 2015-08-13 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019621945 |
| Model | CC3000EM |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | CC3000EM 802.11b/g Module |
| Responsible Party | Marian Kost, Product Line Manager, Connectivity, m-kost@ti.com  , 214-567-2462 |
| Test Firm | Rafael Lopez Martin, DEKRA Testing and Certification, S.A.U., rafael.lopez@dekra.com  , 34-9562-61 91 00 |
| TCB Email | VKerai@tuvam.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. Single Modular approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. C2PC as described in this filing. SAR was evaluated in specific host model: TSONE, with specific antenna(s) as described in this filing. SAR compliance for body worn operating configurations must be restricted to belt-clips and holsters described in this filing, or which maintain a minimum separation distance of 1.5 cm and which contain no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body and simultaneous transmission use conditions are 0.12 W/kg and 1.55 W/kg respectively. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| nAjPDl57g+nYlJY7oFY/0w== | 2015-08-13 | Class II permissive change or modification of presently authorized equipment |
| BWddABMrsxnCzJ+TdgxYvg== | 2012-12-14 | Class II permissive change or modification of presently authorized equipment |
| 8QrX+7cI2wKuWYuaDqY+Qw== | 2012-12-06 | Change in identification of presently authorized equipment. Original FCC ID: WS2-WG1300E00 Grant Date: 07/10/2012 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.2050000 | 15C |
Grants
TCB Grant - Application nAjPDl57g+nYlJY7oFY/0w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD BABT Octagon House, Concorde Way, Segensworth North, Fareham, PO15 5RL United Kingdom |
Date of Grant: 08/13/2015 Application Dated: 08/13/2015 |
| Texas Instruments Incorporated |
| 12500 TI Boulevard |
| M/S D2000 |
| Dallas, TX 75243 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-CC3000EM |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | CC3000EM 802.11b/g Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.205 |
| Output power listed is conducted. Single Modular approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. C2PC as described in this filing. SAR was evaluated in specific host model: TSONE, with specific antenna(s) as described in this filing. SAR compliance for body worn operating configurations must be restricted to belt-clips and holsters described in this filing, or which maintain a minimum separation distance of 1.5 cm and which contain no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body and simultaneous transmission use conditions are 0.12 W/kg and 1.55 W/kg respectively. |
EAS Grant - Application nAjPDl57g+nYlJY7oFY/0w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Texas Instruments Incorporated 12500 TI Boulevard M/S D2000 Dallas, TX 75243 United States |
Date of Grant: 08/13/2015 Application Dated: 08/13/2015 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-CC3000EM |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | CC3000EM 802.11b/g Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.205 |
| Output power listed is conducted. Single Modular approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. C2PC as described in this filing. SAR was evaluated in specific host model: TSONE, with specific antenna(s) as described in this filing. SAR compliance for body worn operating configurations must be restricted to belt-clips and holsters described in this filing, or which maintain a minimum separation distance of 1.5 cm and which contain no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body and simultaneous transmission use conditions are 0.12 W/kg and 1.55 W/kg respectively. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko Canada Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 12/14/2012 Application Dated: 12/14/2012 |
| Texas Instruments Incorporated |
| 12500 TI Boulevard |
| M/S 8669 |
| Dallas, TX 75243 |
| Attention: Kelley Foltz , Evaluation Tools Operations Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-CC3000EM |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | CC3000MOD |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.205 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
EAS Grant - Application BWddABMrsxnCzJ+TdgxYvg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Texas Instruments Incorporated 12500 TI Boulevard M/S 8669 Dallas, TX 75243 United States |
Date of Grant: 12/14/2012 Application Dated: 12/14/2012 |
| Attention: Kelley Foltz , Evaluation Tools Operations Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-CC3000EM |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | CC3000MOD |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.205 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko Canada Inc. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 12/06/2012 Application Dated: 12/05/2012 |
| Texas Instruments Incorporated |
| 12500 TI Boulevard |
| M/S 8669 |
| Dallas, TX 75243 |
| Attention: Kelley Foltz , Evaluation Tools Operations Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-CC3000EM |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN EM board for Module (802.11 bg) |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.205 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
EAS Grant - Application 8QrX+7cI2wKuWYuaDqY+Qw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Texas Instruments Incorporated 12500 TI Boulevard M/S 8669 Dallas, TX 75243 United States |
Date of Grant: 12/06/2012 Application Dated: 12/05/2012 |
| Attention: Kelley Foltz , Evaluation Tools Operations Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-CC3000EM |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Wireless LAN EM board for Module (802.11 bg) |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.205 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| Mail To: |