FCC ID Z64-WL18DBMOD
Digital Transceiver Module
by Texas Instruments Incorporated
Grantee Code: Z64 Product Code: WL18DBMOD
Latest application date: 2022-08-23
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2022-08-23 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2022-08-23 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-07-29 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-07-29 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2020-07-29 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-07-07 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-07-07 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2020-07-07 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2018-03-27 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-03-27 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2018-03-27 |
| 5180-5240 MHz | Original Equipment | 2014-12-24 |
| 2402-2480 MHz | Original Equipment | 2014-12-24 |
| 2402-2480 MHz | Original Equipment | 2014-12-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2015-06-21 | PDF 3.7 MB |
| Internal Photos | Internal Photos | 2015-06-21 | PDF 874.1 KB |
| Photos Host DUT | External Photos | 2020-07-29 | PDF 2.3 MB |
| External Photos | External Photos | 2020-07-07 | PDF 417.2 KB |
| External Photos | External Photos | 2015-06-21 | PDF 336.1 KB |
| Label Location | ID Label/Location Info | 2014-12-24 | PDF 162.3 KB |
| Label Sample | ID Label/Location Info | 2014-12-24 | PDF 59.8 KB |
| Enovation_TI_WMOD1807_C2PC_Layout_Change_15Aug2022 | Operational Description | 2022-08-23 | PDF 169.7 KB |
| SAR Setup Photos | Test Setup Photos | 2020-07-29 | PDF 281.3 KB |
| Test Setup Photos | Test Setup Photos | 2020-07-07 | PDF 301.5 KB |
| Test Setup Photos | Test Setup Photos | 2015-06-21 | PDF 253.1 KB |
| Test Setup Photos DFS | Test Setup Photos | 2015-06-21 | PDF 208.7 KB |
| Test Setup Photos DTS BT LE | Test Setup Photos | 2015-06-21 | PDF 252.9 KB |
| Test Setup Photos DTS WLAN | Test Setup Photos | 2015-06-21 | PDF 253.8 KB |
| Test Setup Photos NII | Test Setup Photos | 2015-06-21 | PDF 253.8 KB |
| Test Setup Photos NII 5.8 | Test Setup Photos | 2015-06-21 | PDF 253.8 KB |
| ETR2202544-01 (2.4GHz) | Test Report | 2022-08-23 | PDF 3.7 MB |
| ETR2202544-02 (5GHz) | Test Report | 2022-08-23 | PDF 3.3 MB |
| Test Report NII | Test Report | 2018-03-27 | PDF 3.6 MB |
| Test Report RFExp. | RF Exposure Info | 2018-03-27 | PDF 327.7 KB |
| Test Report | Test Report | 2014-12-24 | PDF 1.8 MB |
| Test Report Appendix A | Test Report | 2014-12-24 | PDF 303.3 KB |
| Test Report DFS | Test Report | 2014-12-24 | PDF 949.9 KB |
| Test Report DTS BT LE | Test Report | 2014-12-24 | PDF 1.1 MB |
| Test Report DTS BT LE Appendix A | Test Report | 2014-12-24 | PDF 302.2 KB |
| Test Report DTS WLAN 2.4G | Test Report | 2014-12-24 | PDF 2.2 MB |
| Test Report DTS WLAN 2.4G Appendix A | Test Report | 2014-12-24 | PDF 473.4 KB |
| Test Report NII | Test Report | 2014-12-24 | PDF 1.4 MB |
| Test Report NII 5.8GHz | Test Report | 2014-12-24 | PDF 1 MB |
| Test Report NII 5.8GHz Appendix A | Test Report | 2014-12-24 | PDF 24.4 KB |
| Test Report NII 5.8GHz Appendix B | Test Report | 2014-12-24 | PDF 303.6 KB |
| Test Report NII Appendix A | Test Report | 2014-12-24 | PDF 43.8 KB |
| Test Report NII Appendix B | Test Report | 2014-12-24 | PDF 306.2 KB |
| Agent Authorization Letter | Cover Letter(s) | 2022-08-23 | PDF 297.2 KB |
| C2PC Cover_Letter-TI_WIFI_Module | Cover Letter(s) | 2022-08-23 | PDF 143.9 KB |
| Confidentiality Request_C2PC_TI_WIFI_Module | Cover Letter(s) | 2022-08-23 | PDF 164.1 KB |
| Cover_Letter-TI_WIFI_Module_No_BT (002) | Cover Letter(s) | 2022-08-23 | PDF 155.3 KB |
| Z64-WL18SDMOD_cvrltr_FCC POA (005) | Cover Letter(s) | 2022-08-23 | PDF 297.2 KB |
| FCC Agent Authority Letter | Cover Letter(s) | 2020-07-29 | PDF 662 KB |
| FCC Cover Letter | Cover Letter(s) | 2020-07-29 | PDF 92.6 KB |
| C2PC Cover Letter | Cover Letter(s) | 2020-07-07 | PDF 94.3 KB |
| POA Letter | Cover Letter(s) | 2020-07-07 | PDF 662 KB |
| Class II Permissive Change | Cover Letter(s) | 2018-03-27 | PDF 47.5 KB |
| Confidentiality Req. LTC | Cover Letter(s) | 2018-03-27 | PDF 16.9 KB |
| POA | Cover Letter(s) | 2018-03-27 | PDF 22.4 KB |
| Confidential Letter | Cover Letter(s) | 2014-12-24 | PDF 65.5 KB |
| Cover Letter Band 1 | Cover Letter(s) | 2014-12-24 | PDF 17.1 KB |
| Declaration Letter 5GHz | Cover Letter(s) | 2014-12-24 | PDF 33.4 KB |
| Declaration Letter function disabled | Cover Letter(s) | 2014-12-24 | PDF 19.5 KB |
| Modular Approval Letter | Cover Letter(s) | 2014-12-24 | PDF 13.8 KB |
| POA | Cover Letter(s) | 2014-12-24 | PDF 25 KB |
| SAR NA Report Part 1 of 2 | RF Exposure Info | 2020-07-29 | PDF 857.8 KB |
| SAR NA Report Part 2 of 2 | RF Exposure Info | 2020-07-29 | PDF 4.6 MB |
| SAR Report Part 1 of 2 | RF Exposure Info | 2020-07-07 | PDF 725.1 KB |
| SAR Report Part 2 of 2 | RF Exposure Info | 2020-07-07 | PDF 4.6 MB |
| RF Exposure | RF Exposure Info | 2014-12-24 | PDF 347.1 KB |
| Block Diagram Metadata only | Block Diagram | PDF 35.3 KB | |
| Schematics Metadata only | Schematics | PDF 70.4 KB | |
| OpDes Antenna-1 Metadata only | Operational Description | PDF 333.2 KB | |
| OpDes Antenna-2 Metadata only | Operational Description | PDF 1.2 MB | |
| Operational Description Metadata only | Operational Description | PDF 373.1 KB | |
| Operational Description KDB Metadata only | Operational Description | PDF 18.9 KB | |
| Operational Description Product Spec Metadata only | Operational Description | PDF 1 MB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 42.2 KB | |
| Tuneup Procedure Metadata only | Parts List/Tune Up Info | PDF 177.6 KB |
Application Information
| Application ID | iZaGq8KQVhlM/kyIGm+ueg== |
|---|---|
| Final Action Date | 2022-08-23 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0019621945 |
| Model | WL18DBMOD |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Digital Transceiver Module |
| Responsible Party | Marian Kost, Product Line Manager, Connectivity, m-kost@ti.com  , 214-567-2462 |
| Test Firm | Kevin Halpin, Elite Electronic Engineering Inc., khalpin@elitetest.com  , 630-495-9770 |
| TCB Email | reking@elitetest.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II permissive change as indicated in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| iZaGq8KQVhlM/kyIGm+ueg== | 2022-08-23 | Class II permissive change or modification of presently authorized equipment |
| SnDmA3ONt9LHjzwjuAYDEg== | 2022-08-23 | Class II permissive change or modification of presently authorized equipment |
| vzBb84frgmUaow5jj1+x3g== | 2020-07-29 | Class II permissive change or modification of presently authorized equipment |
| ih7CpfqwGLQM7lA+OYrIlg== | 2020-07-29 | Class II permissive change or modification of presently authorized equipment |
| CbAJrjI3GgZoHG8sfUNcKA== | 2020-07-29 | Class II permissive change or modification of presently authorized equipment |
| YrzswqNkWcps8TOJGORu+g== | 2020-07-07 | Class II permissive change or modification of presently authorized equipment |
| AKFFDr/KaS6bptWr0SQNeA== | 2020-07-07 | Class II permissive change or modification of presently authorized equipment |
| 9piPxn8o/vvY1PJWSNJoyg== | 2020-07-07 | Class II permissive change or modification of presently authorized equipment |
| chFZbYXIO20W19tIj/cTJw== | 2018-03-27 | Class II permissive change or modification of presently authorized equipment |
| T3I74RhrdOh8qQMwnCXZRA== | 2018-03-27 | Class II permissive change or modification of presently authorized equipment |
| Hfide0F+t0ZkTjkyVYrAAQ== | 2018-03-27 | Class II permissive change or modification of presently authorized equipment |
| IkrdiZaqq3ljPHwYMy0Fcg== | 2014-12-24 | Original Equipment |
| 5qCTVGYiKgRIpUikXLOgdw== | 2014-12-24 | Original Equipment |
| 0iXkBKBuVSzDl381LIKFXQ== | 2014-12-24 | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.0146000 | 15C | CC |
| 2402-2480 MHz | 0.0049 | 15C | CC |
| 2412-2462 MHz | 0.2432000 | 15C | CC, MO |
| 2412-2462 MHz | 0.2432 | 15C | CC, MO |
| 5180-5240 MHz | 0.0499 | 15E | CC |
| 5180-5240 MHz | 0.0382 | 15E | 38, CC |
| 5190-5230 MHz | 0.0499 | 15E | 38, CC |
| 5260-5320 MHz | 0.0525 | 15E | CC |
| 5260-5320 MHz | 0.0525 | 15E | CC, ND |
| 5260-5320 MHz | 0.0244 | 15E | 38, CC, ND |
| 5270-5310 MHz | 0.0525 | 15E | 38, CC, ND |
| 5500-5700 MHz | 0.0698 | 15E | CC |
| 5500-5700 MHz | 0.0698 | 15E | CC, ND |
| 5500-5700 MHz | 0.0698 | 15E | 38, CC, ND |
| 5745-5825 MHz | 0.0614 | 15E | CC |
| 5745-5825 MHz | 0.0614 | 15E | 38, CC |
Grants
TCB Grant - Application YrzswqNkWcps8TOJGORu+g==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/07/2020 Application Dated: 07/07/2020 |
| Texas Instruments Incorporated |
| 12500 TI Boulevard |
| M/S D2000 |
| Dallas, TX 75243 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Digital Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: Enables portable use when integrated into Clarius Mobile Health Corporation’s Clarius Scanners, Model Numbers L7 HD, L7VET HD, C3 HD, C3VET HD, C7 HD, C7VET HD, L15 HD, L20 HD, EC7 HD and PA HD. The highest reported SAR for body and product specific (10 g SAR) exposure conditions are <0.10 W/kg and <0.10 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application YrzswqNkWcps8TOJGORu+g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Texas Instruments Incorporated 12500 TI Boulevard M/S D2000 Dallas, TX 75243 United States |
Date of Grant: 07/07/2020 Application Dated: 07/07/2020 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Digital Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: Enables portable use when integrated into Clarius Mobile Health Corporation’s Clarius Scanners, Model Numbers L7 HD, L7VET HD, C3 HD, C3VET HD, C7 HD, C7VET HD, L15 HD, L20 HD, EC7 HD and PA HD. The highest reported SAR for body and product specific (10 g SAR) exposure conditions are <0.10 W/kg and <0.10 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/29/2020 Application Dated: 07/29/2020 |
| Texas Instruments Incorporated |
| 12500 TI Boulevard |
| M/S D2000 |
| Dallas, TX 75243 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Digital Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: The previous C2PC, dated 06/29/2020, enabled portable use when integrated into Clarius Mobile Health Corp, Clarius Scanner, Model Numbers L7 HD, L7VET HD, C3 HD, C3VET HD, C7 HD, C7VET HD, L15 HD, L20 HD, EC7 HD, and PA HD. This C2PC enables portable use when integrated into Clarius Mobile Health Corp, Clarius Scanner, Model Numbers L7, L7VET, C3, C3VET, C7, C7VET, and EC7. The highest reported SAR for body and product specific (10 g SAR) exposure conditions are <0.10 W/kg and <0.10 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application vzBb84frgmUaow5jj1+x3g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Texas Instruments Incorporated 12500 TI Boulevard M/S D2000 Dallas, TX 75243 United States |
Date of Grant: 07/29/2020 Application Dated: 07/29/2020 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Digital Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: The previous C2PC, dated 06/29/2020, enabled portable use when integrated into Clarius Mobile Health Corp, Clarius Scanner, Model Numbers L7 HD, L7VET HD, C3 HD, C3VET HD, C7 HD, C7VET HD, L15 HD, L20 HD, EC7 HD, and PA HD. This C2PC enables portable use when integrated into Clarius Mobile Health Corp, Clarius Scanner, Model Numbers L7, L7VET, C3, C3VET, C7, C7VET, and EC7. The highest reported SAR for body and product specific (10 g SAR) exposure conditions are <0.10 W/kg and <0.10 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/27/2018 Application Dated: 03/26/2018 |
| Texas Instruments Incorporated |
| 12500 TI Boulevard |
| M/S D2000 |
| Dallas, TX 75243 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application T3I74RhrdOh8qQMwnCXZRA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Texas Instruments Incorporated 12500 TI Boulevard M/S D2000 Dallas, TX 75243 United States |
Date of Grant: 03/27/2018 Application Dated: 03/26/2018 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 08/23/2022 Application Dated: 08/22/2022 |
| Texas Instruments Incorporated |
| 12500 TI Boulevard |
| M/S D2000 |
| Dallas, TX 75243 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Digital Transceiver Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0499 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0525 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.0698 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II permissive change as indicated in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application SnDmA3ONt9LHjzwjuAYDEg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Texas Instruments Incorporated 12500 TI Boulevard M/S D2000 Dallas, TX 75243 United States |
Date of Grant: 08/23/2022 Application Dated: 08/22/2022 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Digital Transceiver Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0499 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0525 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.0698 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II permissive change as indicated in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Elite Electronic Engineering, Inc. 1516 Centre Circle Downers Grove, IL 60515 |
Date of Grant: 08/23/2022 Application Dated: 08/22/2022 |
| Texas Instruments Incorporated |
| 12500 TI Boulevard |
| M/S D2000 |
| Dallas, TX 75243 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Digital Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II permissive change as indicated in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application iZaGq8KQVhlM/kyIGm+ueg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Texas Instruments Incorporated 12500 TI Boulevard M/S D2000 Dallas, TX 75243 United States |
Date of Grant: 08/23/2022 Application Dated: 08/22/2022 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Digital Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II permissive change as indicated in this filing. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/24/2014 Application Dated: 12/23/2014 |
| Texas Instruments Incorporated |
| 12500 TI Boulevard |
| M/S D2000 |
| Dallas, TX 75243 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wifi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0382 | ||
| 38 CC | 15E | 5190.0 - 5230.0 | 0.0499 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0244 | ||
| 38 CC ND | 15E | 5270.0 - 5310.0 | 0.0525 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0614 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.0698 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application IkrdiZaqq3ljPHwYMy0Fcg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Texas Instruments Incorporated 12500 TI Boulevard M/S D2000 Dallas, TX 75243 United States |
Date of Grant: 12/24/2014 Application Dated: 12/23/2014 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wifi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0382 | ||
| 38 CC | 15E | 5190.0 - 5230.0 | 0.0499 | ||
| 38 CC ND | 15E | 5260.0 - 5320.0 | 0.0244 | ||
| 38 CC ND | 15E | 5270.0 - 5310.0 | 0.0525 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.0614 | ||
| 38 CC ND | 15E | 5500.0 - 5700.0 | 0.0698 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/29/2020 Application Dated: 07/29/2020 |
| Texas Instruments Incorporated |
| 12500 TI Boulevard |
| M/S D2000 |
| Dallas, TX 75243 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Digital Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: The previous C2PC, dated 06/29/2020, enabled portable use when integrated into Clarius Mobile Health Corp, Clarius Scanner, Model Numbers L7 HD, L7VET HD, C3 HD, C3VET HD, C7 HD, C7VET HD, L15 HD, L20 HD, EC7 HD, and PA HD. This C2PC enables portable use when integrated into Clarius Mobile Health Corp, Clarius Scanner, Model Numbers L7, L7VET, C3, C3VET, C7, C7VET, and EC7. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ih7CpfqwGLQM7lA+OYrIlg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Texas Instruments Incorporated 12500 TI Boulevard M/S D2000 Dallas, TX 75243 United States |
Date of Grant: 07/29/2020 Application Dated: 07/29/2020 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Digital Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: The previous C2PC, dated 06/29/2020, enabled portable use when integrated into Clarius Mobile Health Corp, Clarius Scanner, Model Numbers L7 HD, L7VET HD, C3 HD, C3VET HD, C7 HD, C7VET HD, L15 HD, L20 HD, EC7 HD, and PA HD. This C2PC enables portable use when integrated into Clarius Mobile Health Corp, Clarius Scanner, Model Numbers L7, L7VET, C3, C3VET, C7, C7VET, and EC7. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/27/2018 Application Dated: 03/26/2018 |
| Texas Instruments Incorporated |
| 12500 TI Boulevard |
| M/S D2000 |
| Dallas, TX 75243 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Hfide0F+t0ZkTjkyVYrAAQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Texas Instruments Incorporated 12500 TI Boulevard M/S D2000 Dallas, TX 75243 United States |
Date of Grant: 03/27/2018 Application Dated: 03/26/2018 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 03/27/2018 Application Dated: 03/26/2018 |
| Texas Instruments Incorporated |
| 12500 TI Boulevard |
| M/S D2000 |
| Dallas, TX 75243 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0499 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0525 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0698 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application chFZbYXIO20W19tIj/cTJw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Texas Instruments Incorporated 12500 TI Boulevard M/S D2000 Dallas, TX 75243 United States |
Date of Grant: 03/27/2018 Application Dated: 03/26/2018 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0499 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0525 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0698 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021) and LSR 2 dBi Rubber Whip/Dipole (P/Ns 001-0012, 080-0013, and 080-014). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/29/2020 Application Dated: 07/29/2020 |
| Texas Instruments Incorporated |
| 12500 TI Boulevard |
| M/S D2000 |
| Dallas, TX 75243 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Digital Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0499 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0525 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.0698 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: The previous C2PC, dated 06/29/2020, enabled portable use when integrated into Clarius Mobile Health Corp, Clarius Scanner, Model Numbers L7 HD, L7VET HD, C3 HD, C3VET HD, C7 HD, C7VET HD, L15 HD, L20 HD, EC7 HD, and PA HD. This C2PC enables portable use when integrated into Clarius Mobile Health Corp, Clarius Scanner, Model Numbers L7, L7VET, C3, C3VET, C7, C7VET, and EC7. The highest reported SAR for body and product specific (10 g SAR) exposure conditions are <0.10 W/kg and 0.17 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application CbAJrjI3GgZoHG8sfUNcKA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Texas Instruments Incorporated 12500 TI Boulevard M/S D2000 Dallas, TX 75243 United States |
Date of Grant: 07/29/2020 Application Dated: 07/29/2020 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Digital Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0499 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0525 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.0698 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: The previous C2PC, dated 06/29/2020, enabled portable use when integrated into Clarius Mobile Health Corp, Clarius Scanner, Model Numbers L7 HD, L7VET HD, C3 HD, C3VET HD, C7 HD, C7VET HD, L15 HD, L20 HD, EC7 HD, and PA HD. This C2PC enables portable use when integrated into Clarius Mobile Health Corp, Clarius Scanner, Model Numbers L7, L7VET, C3, C3VET, C7, C7VET, and EC7. The highest reported SAR for body and product specific (10 g SAR) exposure conditions are <0.10 W/kg and 0.17 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/07/2020 Application Dated: 07/07/2020 |
| Texas Instruments Incorporated |
| 12500 TI Boulevard |
| M/S D2000 |
| Dallas, TX 75243 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Digital Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: Enables portable use when integrated into Clarius Mobile Health Corporation’s Clarius Scanners, Model Numbers L7 HD, L7VET HD, C3 HD, C3VET HD, C7 HD, C7VET HD, L15 HD, L20 HD, EC7 HD and PA HD. The highest reported SAR for body and product specific (10 g SAR) exposure conditions are <0.10 W/kg and <0.10 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application AKFFDr/KaS6bptWr0SQNeA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Texas Instruments Incorporated 12500 TI Boulevard M/S D2000 Dallas, TX 75243 United States |
Date of Grant: 07/07/2020 Application Dated: 07/07/2020 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Digital Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: Enables portable use when integrated into Clarius Mobile Health Corporation’s Clarius Scanners, Model Numbers L7 HD, L7VET HD, C3 HD, C3VET HD, C7 HD, C7VET HD, L15 HD, L20 HD, EC7 HD and PA HD. The highest reported SAR for body and product specific (10 g SAR) exposure conditions are <0.10 W/kg and <0.10 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/07/2020 Application Dated: 07/07/2020 |
| Texas Instruments Incorporated |
| 12500 TI Boulevard |
| M/S D2000 |
| Dallas, TX 75243 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Digital Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0499 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0525 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.0698 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: Enables portable use when integrated into Clarius Mobile Health Corporation’s Clarius Scanners, Model Numbers L7 HD, L7VET HD, C3 HD, C3VET HD, C7 HD, C7VET HD, L15 HD, L20 HD, EC7 HD and PA HD. The highest reported SAR for body and product specific (10 g SAR) exposure conditions are <0.10 W/kg and <0.10 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 9piPxn8o/vvY1PJWSNJoyg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Texas Instruments Incorporated 12500 TI Boulevard M/S D2000 Dallas, TX 75243 United States |
Date of Grant: 07/07/2020 Application Dated: 07/07/2020 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Digital Transceiver Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0499 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.0525 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.0698 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 |
| Single Modular Approval. Power listed is the maximum combined conducted output power. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: Enables portable use when integrated into Clarius Mobile Health Corporation’s Clarius Scanners, Model Numbers L7 HD, L7VET HD, C3 HD, C3VET HD, C7 HD, C7VET HD, L15 HD, L20 HD, EC7 HD and PA HD. The highest reported SAR for body and product specific (10 g SAR) exposure conditions are <0.10 W/kg and <0.10 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/24/2014 Application Dated: 12/23/2014 |
| Texas Instruments Incorporated |
| 12500 TI Boulevard |
| M/S D2000 |
| Dallas, TX 75243 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Wifi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 5qCTVGYiKgRIpUikXLOgdw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Texas Instruments Incorporated 12500 TI Boulevard M/S D2000 Dallas, TX 75243 United States |
Date of Grant: 12/24/2014 Application Dated: 12/23/2014 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Wifi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 12/24/2014 Application Dated: 12/23/2014 |
| Texas Instruments Incorporated |
| 12500 TI Boulevard |
| M/S D2000 |
| Dallas, TX 75243 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wifi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 0iXkBKBuVSzDl381LIKFXQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Texas Instruments Incorporated 12500 TI Boulevard M/S D2000 Dallas, TX 75243 United States |
Date of Grant: 12/24/2014 Application Dated: 12/23/2014 |
| Attention: Marian Kost , Product Line Manager, Connectivity |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | Z64-WL18DBMOD |
| Name of Grantee: | Texas Instruments Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wifi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |