FCC ID Z64-WL18SBMOD

FCC ID	Z64-WL18SBMOD
Mirrors	fcc.id \| gov \| fccid.ai
Grantee Code	Z64
Product Code	WL18SBMOD
Applicant Business	Texas Instruments Incorporated 🇺🇸
Related Domains	ti.com
Equipment Class	WiFi and Bluetooth Module
Test Firm	Sporton International Inc.

Frequency Range	Application Purpose	Final Action Date
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2019-06-05
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2019-06-05
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2018-02-21
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2018-02-21
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2015-11-14
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2015-11-14
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2015-09-15
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2015-09-15
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2015-08-11
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2015-08-11
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2015-08-11
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2015-08-11
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2015-04-17
2402-2480 MHz	Class II permissive change or modification of presently authorized equipment	2015-04-17
2402-2480 MHz	Original Equipment	2014-02-03
2402-2480 MHz	Original Equipment	2014-02-03

Document	Type	Available	File
User Manual	Users Manual	2019-06-05	PDF 2.6 MB
User Manual	Users Manual	2018-02-21	PDF 2.2 MB
User Manual	Users Manual	2015-08-11	PDF 914.7 KB
User Manual	Users Manual	2015-08-11	PDF 903.3 KB
Users Manual	Users Manual	2015-08-11	PDF 903.3 KB
User Guide	Users Manual	2015-04-17	PDF 547.7 KB
User Manual	Users Manual	2015-04-17	PDF 547.7 KB
User Manual	Users Manual	2014-07-24	PDF 5.2 MB
User Manual Leaflet	Users Manual	2014-07-24	PDF 378.7 KB
User Manual OEM	Users Manual	2014-07-24	PDF 131.3 KB
User Manual leaflet	Users Manual	2014-07-24	PDF 378.7 KB
Internal Photos	Internal Photos	2018-02-21	PDF 371.8 KB
Internal Photos	Internal Photos	2015-11-14	PDF 680 KB
Internal Photos	Internal Photos	2015-08-11	PDF 226.4 KB
Internal Photos	Internal Photos	2015-08-11	PDF 203.8 KB
Internal Photos	Internal Photos	2015-04-17	PDF 595.4 KB
Internal Photos	Internal Photos	2014-07-24	PDF 620.2 KB
External Photos	External Photos	2018-02-21	PDF 844.5 KB
External Photos	External Photos	2015-11-14	PDF 286.4 KB
External Photos	External Photos	2015-08-11	PDF 108.2 KB
External Photos	External Photos	2015-08-11	PDF 116.7 KB
External Photos	External Photos	2015-04-17	PDF 127.4 KB
External Photos	External Photos	2014-07-24	PDF 191.5 KB
Label	ID Label/Location Info	2015-08-11	PDF 100.7 KB
Label	ID Label/Location Info	2015-08-11	PDF 89.3 KB
Label Location	ID Label/Location Info	2015-04-17	PDF 62.4 KB
Label Location	ID Label/Location Info	2014-02-03	PDF 88.3 KB
Label Sample	ID Label/Location Info	2014-02-03	PDF 47.4 KB
Operation Description	Operational Description	2015-08-11	PDF 42.4 KB
Operational Description	Operational Description	2015-08-11	PDF 42.4 KB
Operational Description	Operational Description	2015-08-11	PDF 42.4 KB
Antenna Port	Operational Description	2015-04-17	PDF 193.1 KB
Antenna Report	Operational Description	2015-04-17	PDF 372.7 KB
Operational Description Antenna Port Connector Specification	Operational Description	2015-04-17	PDF 193.1 KB
Operational Description Host Antenna Report	Operational Description	2015-04-17	PDF 372.7 KB
Test Photos	Test Setup Photos	2015-11-14	PDF 420.3 KB
Test Setup Photos DSS	Test Setup Photos	2015-09-15	PDF 205.5 KB
Test Setup Photos DTS	Test Setup Photos	2015-09-15	PDF 205.5 KB
Test Setup Photos DTS WLAN	Test Setup Photos	2015-09-15	PDF 205.4 KB
Test Setup Photos	Test Setup Photos	2015-08-11	PDF 314 KB
Test Setup Photos	Test Setup Photos	2015-08-11	PDF 235.3 KB
Test Setup Photos	Test Setup Photos	2015-04-17	PDF 417.7 KB
Test Setup Photos	Test Setup Photos	2014-07-24	PDF 224.7 KB
Test Setup Photos	Test Setup Photos	2014-07-24	PDF 215.9 KB
Test Setup Photos DTS	Test Setup Photos	2014-07-24	PDF 217.4 KB
Test Report DSS BT	Test Report	2018-02-21	PDF 3.2 MB
Test Report DTS BT LE	Test Report	2018-02-21	PDF 2.5 MB
Test Report DTS WLAN	Test Report	2018-02-21	PDF 4 MB
Test Report	Test Report	2015-11-14	PDF 691.2 KB
Test Report	Test Report	2015-11-14	PDF 698.2 KB
Test Report DSS	Test Report	2015-09-15	PDF 507.7 KB
Test Report DSS Appendix A	Test Report	2015-09-15	PDF 94 KB
Test Report DSS Appendix B	Test Report	2015-09-15	PDF 205.6 KB
Test Report DTS	Test Report	2015-09-15	PDF 568.3 KB
Test Report DTS Appendix A	Test Report	2015-09-15	PDF 97.2 KB
Test Report DTS Appendix B	Test Report	2015-09-15	PDF 206.3 KB
Test Report DTS WLAN	Test Report	2015-09-15	PDF 565.7 KB
Test Report DTS WLAN Appendix A	Test Report	2015-09-15	PDF 19.4 KB
Test Report DTS WLAN Appendix B	Test Report	2015-09-15	PDF 165.8 KB
Test Report DTS WLAN Appendix C	Test Report	2015-09-15	PDF 377.6 KB
Test Report	Test Report	2015-08-11	PDF 324.5 KB
Test Report	Test Report	2015-08-11	PDF 335.5 KB
Test Report	Test Report	2015-04-17	PDF 1.9 MB
Test Report	Test Report	2015-04-17	PDF 1.9 MB
Test Report	Test Report	2014-02-03	PDF 1.9 MB
Test Report DTS	Test Report	2014-02-03	PDF 2.4 MB
Test Report DTS 4.0	Test Report	2014-02-03	PDF 1.1 MB
C2PC Host Manufacturer Design Response	Attestation Statements	2015-08-11	PDF 110.7 KB
C2PC Host Manufacturer Design Response	Attestation Statements	2015-08-11	PDF 110.8 KB
C2PC Details	Cover Letter(s)	2019-06-05	PDF 716.4 KB
Class II Permissive Change	Cover Letter(s)	2019-06-05	PDF 20.9 KB
POA	Cover Letter(s)	2019-06-05	PDF 21.6 KB
C2PC Details	Cover Letter(s)	2018-02-21	PDF 257.9 KB
C2PC Detials	Cover Letter(s)	2018-02-21	PDF 257.9 KB
Class II Permissive Change	Cover Letter(s)	2018-02-21	PDF 48.3 KB
Confidentiality Request Letter Long Term	Cover Letter(s)	2018-02-21	PDF 17 KB
POA	Cover Letter(s)	2018-02-21	PDF 21.5 KB
Agent Authorisation	Cover Letter(s)	2015-11-14	PDF 33.5 KB
C2PC Letter	Cover Letter(s)	2015-11-14	PDF 37.7 KB
C2PC and LMA	Cover Letter(s)	2015-11-14	PDF 355.2 KB
Class II Permissive Change Letter	Cover Letter(s)	2015-09-15	PDF 33.4 KB
Confidentiality Request Letter	Cover Letter(s)	2015-09-15	PDF 62 KB
POA	Cover Letter(s)	2015-09-15	PDF 24 KB
731 Signature Authorization Letter	Cover Letter(s)	2015-08-11	PDF 331.7 KB
Class II Permissive Change Letter	Cover Letter(s)	2015-08-11	PDF 36.5 KB
Class II Permissive Change Letter	Cover Letter(s)	2015-08-11	PDF 33.9 KB
Class II Premissive Change Letter	Cover Letter(s)	2015-08-11	PDF 33.9 KB
Form 731 Agent Authority Letter	Cover Letter(s)	2015-08-11	PDF 331.7 KB
Class II Letter	Cover Letter(s)	2015-04-17	PDF 58.7 KB
Class II Permissive Change Cover Letter	Cover Letter(s)	2015-04-17	PDF 58.7 KB
Justification Letter	Cover Letter(s)	2015-04-17	PDF 30.9 KB
POA	Cover Letter(s)	2015-04-17	PDF 60.3 KB
Test Lab Authorization	Cover Letter(s)	2015-04-17	PDF 263.5 KB
Test Lab Authorization Letter	Cover Letter(s)	2015-04-17	PDF 263.5 KB
Confidential Letter	Cover Letter(s)	2014-02-03	PDF 22.4 KB
Modular Approval Cover Letter	Cover Letter(s)	2014-02-03	PDF 13.8 KB
Modular Approval Letter	Cover Letter(s)	2014-02-03	PDF 13.8 KB
POA	Cover Letter(s)	2014-02-03	PDF 178.2 KB
Short Term Confidential Letter	Cover Letter(s)	2014-02-03	PDF 22.6 KB
Test Rpt RFExp	RF Exposure Info	2018-02-21	PDF 452 KB
Antenna details	Parts List/Tune Up Info	2015-11-14	PDF 1,008.4 KB
Antenna location	Parts List/Tune Up Info	2015-11-14	PDF 803.4 KB
SAR Report part 1	RF Exposure Info	2015-11-14	PDF 2.4 MB
SAR Report part 2	RF Exposure Info	2015-11-14	PDF 3.4 MB
RF Exposure	RF Exposure Info	2015-08-11	PDF 143.3 KB
RF Exposure	RF Exposure Info	2015-08-11	PDF 152.8 KB
RF Exposure	RF Exposure Info	2015-04-17	PDF 107.7 KB
RF Exposure	RF Exposure Info	2014-02-03	PDF 418.5 KB
Operation Description TDK Antenna Spec Metadata only	Operational Description		PDF 291.7 KB
Operational Description Dipole Antenna Spec Metadata only	Operational Description		PDF 336.6 KB
Operational Description Ethertronics Antenna Spec Metadata only	Operational Description		PDF 308.2 KB
Operational Description Laird Antenna Spec Metadata only	Operational Description		PDF 585.6 KB
Operational Description PIFA Antenna Spec Metadata only	Operational Description		PDF 1.6 MB
Operational Description Pulse Antenna Spec Metadata only	Operational Description		PDF 5.2 MB

Application ID	mkKbhpnFwU3u5z3RI7XuUw==
Final Action Date	2019-06-05
Application Purpose	Class II permissive change or modification of presently authorized equipment
Applicant FRN	0019621945
Model	WL18SBMOD
Frequency Range	2402-2480 MHz
Equipment Class	DTS - Digital Transmission System
Device Description	WiFi and Bluetooth Module
Responsible Party	Marian Kost, Product Line Manager, Connectivity, m-kost@ti.com , 214-567-2462
Test Firm	Alex Chen, Sporton International Inc., alex@sporton.com.tw , 88633273456
TCB Email	tei@timcoengr.com
TCB Scope	A4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term Confidentiality	No
Long-Term Confidentiality	No
Grant Deferral	No
Modular Equipment	Single Modular Approval
Composite Device	Yes
Composite Part	No
Cognitive Radio	No
Authorization Waiver	No
Authorization Waiver Approved	No
Section 5301 Certification	Yes
Related OET Knowledge DataBase Inquiry	No
Grant Comments	Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.5 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

Application ID	Date	Purpose
mkKbhpnFwU3u5z3RI7XuUw==	2019-06-05	Class II permissive change or modification of presently authorized equipment
Ntn1LV+kR73hDgxJr0YQZw==	2019-06-05	Class II permissive change or modification of presently authorized equipment
LQpA0+KVUpmzIrzGP9fbxw==	2018-02-21	Class II permissive change or modification of presently authorized equipment
2Asyn1++jv6lwMQq0RCckQ==	2018-02-21	Class II permissive change or modification of presently authorized equipment
TdVCOHN2R1hGvCa9n7UPVA==	2015-11-14	Class II permissive change or modification of presently authorized equipment
TY368vBw6JS4cMbzly6teA==	2015-11-14	Class II permissive change or modification of presently authorized equipment
IQqHx63ESR7udZUIpZMduQ==	2015-09-15	Class II permissive change or modification of presently authorized equipment
9pO2U3W5blpkiQ7iKYA9Lg==	2015-09-15	Class II permissive change or modification of presently authorized equipment
UvThB7gSBQhd+OXw68h45g==	2015-08-11	Class II permissive change or modification of presently authorized equipment
OflzPubICMVQgbXKKVEGAQ==	2015-08-11	Class II permissive change or modification of presently authorized equipment
5xFeCOIxbBa6tNz/KEqECg==	2015-08-11	Class II permissive change or modification of presently authorized equipment
1zs9VqwPOB2M69BoI2Icwg==	2015-08-11	Class II permissive change or modification of presently authorized equipment
lCHL5l0gH/fnpFYDJWrnAQ==	2015-04-17	Class II permissive change or modification of presently authorized equipment
1BmNDu2tkg9TGrgS2B8sww==	2015-04-17	Class II permissive change or modification of presently authorized equipment
mh6MEHw+AHG4nejXAIBwjA==	2014-02-03	Original Equipment
35ehzJE2UngnbNLa2bmqFw==	2014-02-03	Original Equipment

Frequency	Output	Rules	Grant Notes
2402-2480 MHz	0.0173000	15C
2402-2480 MHz	0.01	15C	CC, MO
2402-2480 MHz	0.0173000	15C	CC
2402-2480 MHz	0.01	15C	MO
2402-2480 MHz	0.0100000	15C
2412-2462 MHz	0.2438	15C	CC, MO
2412-2462 MHz	0.2438	15C	MO
2422-2452 MHz	0.1052	15C	CC, MO
2422-2452 MHz	0.1052	15C	MO

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 08/11/2015

Application Dated: 08/11/2015

Texas Instruments Incorporated

12500 TI Boulevard

M/S D2000

Dallas, TX 75243

Attention: Marian Kost , Product Line Manager, Connectivity

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	WIFI AND BLUETOOTH MODULE
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0173

Single Modular Approval. Power listed is conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of -0.36dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. (Original Grant 02/03/2014)

Class II Permissive Change: Limited single modular approval. This permissive change integrates this module into host Emberpulse Home Display/Automation Device, Model BBBA. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures or as evaluated in this filing with module FCCID S4GEM35XB.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Texas Instruments Incorporated
12500 TI Boulevard M/S D2000
Dallas, TX 75243
United States

Date of Grant: 08/11/2015

Application Dated: 08/11/2015

Attention: Marian Kost , Product Line Manager, Connectivity

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	WIFI AND BLUETOOTH MODULE
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0173

Single Modular Approval. Power listed is conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of -0.36dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. (Original Grant 02/03/2014)

Class II Permissive Change: Limited single modular approval. This permissive change integrates this module into host Emberpulse Home Display/Automation Device, Model BBBA. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures or as evaluated in this filing with module FCCID S4GEM35XB.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application TY368vBw6JS4cMbzly6teA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 11/14/2015

Application Dated: 11/13/2015

Texas Instruments Incorporated

12500 TI Boulevard

M/S D2000

Dallas, TX 75243

Attention: Marian Kost , Product Line Manager, Connectivity

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Digital Transmission System
Notes:	WiFi and Bluetooth Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2402.0 - 2480.0	0.01
CC MO	15C	2412.0 - 2462.0	0.2438
CC MO	15C	2422.0 - 2452.0	0.1052

Limited Single Modular Approval. Power listed is maximum combined conducted output power.

This device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is certified for mobile and fixed applications. Simultaneous transmission may be done through FCC multi transmitter product procedures. OEM integrators must be provided with installation instructions and labelling requirements for finished products. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The device has a 20 MHz and 40 MHz bandwidth mode.

Class 2 Permissive Change to Limited Modular Approval for portable use in the handheld device as shown in this filing; model number XMDS2770. The highest reported SAR value for Body worn operation is: 0.20 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Texas Instruments Incorporated
12500 TI Boulevard M/S D2000
Dallas, TX 75243
United States

Date of Grant: 11/14/2015

Application Dated: 11/13/2015

Attention: Marian Kost , Product Line Manager, Connectivity

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Digital Transmission System
Notes:	WiFi and Bluetooth Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2402.0 - 2480.0	0.01
CC MO	15C	2412.0 - 2462.0	0.2438
CC MO	15C	2422.0 - 2452.0	0.1052

Limited Single Modular Approval. Power listed is maximum combined conducted output power.

This device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is certified for mobile and fixed applications. Simultaneous transmission may be done through FCC multi transmitter product procedures. OEM integrators must be provided with installation instructions and labelling requirements for finished products. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The device has a 20 MHz and 40 MHz bandwidth mode.

Class 2 Permissive Change to Limited Modular Approval for portable use in the handheld device as shown in this filing; model number XMDS2770. The highest reported SAR value for Body worn operation is: 0.20 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application TdVCOHN2R1hGvCa9n7UPVA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101

Date of Grant: 11/14/2015

Application Dated: 11/13/2015

Texas Instruments Incorporated

12500 TI Boulevard

M/S D2000

Dallas, TX 75243

Attention: Marian Kost , Product Line Manager, Connectivity

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	WiFi and Bluetooth Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0173

Limited Single Modular Approval. Power listed is conducted.

Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is certified for mobile and fixed applications. simultaneous transmission may be done through FCC multi transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Class 2 Permissive Change to Limited Modular Approval for portable use in the handheld device as shown in this filing; model number XMDS2770. The highest reported SAR value for Body worn operation is: <0.10 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Texas Instruments Incorporated
12500 TI Boulevard M/S D2000
Dallas, TX 75243
United States

Date of Grant: 11/14/2015

Application Dated: 11/13/2015

Attention: Marian Kost , Product Line Manager, Connectivity

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	WiFi and Bluetooth Module
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0173

Limited Single Modular Approval. Power listed is conducted.

Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is certified for mobile and fixed applications. simultaneous transmission may be done through FCC multi transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Class 2 Permissive Change to Limited Modular Approval for portable use in the handheld device as shown in this filing; model number XMDS2770. The highest reported SAR value for Body worn operation is: <0.10 W/kg.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application OflzPubICMVQgbXKKVEGAQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 08/11/2015

Application Dated: 08/11/2015

Texas Instruments Incorporated

12500 TI Boulevard

M/S D2000

Dallas, TX 75243

Attention: Marian Kost , Product Line Manager, Connectivity

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Digital Transmission System
Notes:	WIFI AND BLUETOOTH MODULE
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2402.0 - 2480.0	0.01
CC MO	15C	2412.0 - 2462.0	0.2438
CC MO	15C	2422.0 - 2452.0	0.1052

Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.22dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. (Original Grant 02/03/2014)

Class II Permissive Change: Limited single modular approval. This permissive change integrates this module into host Emberpulse Home Display/Automation Device, Model BBSE. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures or as evaluated in this filing with module FCCID S4GEM35XB.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Texas Instruments Incorporated
12500 TI Boulevard M/S D2000
Dallas, TX 75243
United States

Date of Grant: 08/11/2015

Application Dated: 08/11/2015

Attention: Marian Kost , Product Line Manager, Connectivity

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Digital Transmission System
Notes:	WIFI AND BLUETOOTH MODULE
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2402.0 - 2480.0	0.01
CC MO	15C	2412.0 - 2462.0	0.2438
CC MO	15C	2422.0 - 2452.0	0.1052

Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.22dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. (Original Grant 02/03/2014)

Class II Permissive Change: Limited single modular approval. This permissive change integrates this module into host Emberpulse Home Display/Automation Device, Model BBSE. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures or as evaluated in this filing with module FCCID S4GEM35XB.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application Ntn1LV+kR73hDgxJr0YQZw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 06/05/2019

Application Dated: 06/03/2019

Texas Instruments Incorporated

12500 TI Boulevard

M/S D2000

Dallas, TX 75243

Attention: Marian Kost , Product Line Manager, Connectivity

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	WiFi and Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0173

Single Modular Approval. Power listed is maximum combined conducted output power. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.5 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Texas Instruments Incorporated
12500 TI Boulevard M/S D2000
Dallas, TX 75243
United States

Date of Grant: 06/05/2019

Application Dated: 06/03/2019

Attention: Marian Kost , Product Line Manager, Connectivity

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	WiFi and Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0173

Single Modular Approval. Power listed is maximum combined conducted output power. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.5 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application mkKbhpnFwU3u5z3RI7XuUw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 06/05/2019

Application Dated: 06/03/2019

Texas Instruments Incorporated

12500 TI Boulevard

M/S D2000

Dallas, TX 75243

Attention: Marian Kost , Product Line Manager, Connectivity

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Digital Transmission System
Notes:	WiFi and Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2402.0 - 2480.0	0.01
CC MO	15C	2412.0 - 2462.0	0.2438
CC MO	15C	2422.0 - 2452.0	0.1052

Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.5 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Texas Instruments Incorporated
12500 TI Boulevard M/S D2000
Dallas, TX 75243
United States

Date of Grant: 06/05/2019

Application Dated: 06/03/2019

Attention: Marian Kost , Product Line Manager, Connectivity

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Digital Transmission System
Notes:	WiFi and Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2402.0 - 2480.0	0.01
CC MO	15C	2412.0 - 2462.0	0.2438
CC MO	15C	2422.0 - 2452.0	0.1052

Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.5 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application mh6MEHw+AHG4nejXAIBwjA==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669

Date of Grant: 02/03/2014

Application Dated: 01/29/2014

Texas Instruments Incorporated

12500 TI Boulevard

M/S 8669

Dallas, TX 75243

Attention: Kelley Foltz , Evaluation Tools Operations Director

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Digital Transmission System
Notes:	WIFI AND BLUETOOTH MODULE
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
MO	15C	2402.0 - 2480.0	0.01
MO	15C	2412.0 - 2462.0	0.2438
MO	15C	2422.0 - 2452.0	0.1052

Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.22dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode.

MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Texas Instruments Incorporated
12500 TI Boulevard M/S 8669
Dallas, TX 75243
United States

Date of Grant: 02/03/2014

Application Dated: 01/29/2014

Attention: Kelley Foltz , Evaluation Tools Operations Director

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Digital Transmission System
Notes:	WIFI AND BLUETOOTH MODULE
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
MO	15C	2402.0 - 2480.0	0.01
MO	15C	2412.0 - 2462.0	0.2438
MO	15C	2422.0 - 2452.0	0.1052

Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.22dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode.

MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application LQpA0+KVUpmzIrzGP9fbxw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 02/21/2018

Application Dated: 02/14/2018

Texas Instruments Incorporated

12500 TI Boulevard

M/S D2000

Dallas, TX 75243

Attention: Mattias Lange , GM, Embedded Connectivity Solutions

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Digital Transmission System
Notes:	WiFi and Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2402.0 - 2480.0	0.01
CC MO	15C	2412.0 - 2462.0	0.2438
CC MO	15C	2422.0 - 2452.0	0.1052

Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.5 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. (Original Grant 02/03/2014) Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021). This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Texas Instruments Incorporated
12500 TI Boulevard M/S D2000
Dallas, TX 75243
United States

Date of Grant: 02/21/2018

Application Dated: 02/14/2018

Attention: Mattias Lange , GM, Embedded Connectivity Solutions

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Digital Transmission System
Notes:	WiFi and Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2402.0 - 2480.0	0.01
CC MO	15C	2412.0 - 2462.0	0.2438
CC MO	15C	2422.0 - 2452.0	0.1052

Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.5 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. (Original Grant 02/03/2014) Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021). This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application lCHL5l0gH/fnpFYDJWrnAQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 04/17/2015

Application Dated: 04/17/2015

Texas Instruments Incorporated

12500 TI Boulevard

M/S D2000

Dallas, TX 75243

Attention: Marian Kost , Product Line Manager, Connectivity

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Digital Transmission System
Notes:	Dry erase whiteboard with digital imaging capacity
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0 - 2480.0	0.01

Limited Single Modular Approval. Power listed is conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. (Date of Grant: 02/03/2014)

Class II Permissive Change: This Class II Permissive Change is to integrate this module into a SMART Technologies Digital Capture Board (model: Kapp84). The host antenna will have a higher gain of 1.88 dBi.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Texas Instruments Incorporated
12500 TI Boulevard M/S D2000
Dallas, TX 75243
United States

Date of Grant: 04/17/2015

Application Dated: 04/17/2015

Attention: Marian Kost , Product Line Manager, Connectivity

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Digital Transmission System
Notes:	Dry erase whiteboard with digital imaging capacity
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0 - 2480.0	0.01

Limited Single Modular Approval. Power listed is conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. (Date of Grant: 02/03/2014)

Class II Permissive Change: This Class II Permissive Change is to integrate this module into a SMART Technologies Digital Capture Board (model: Kapp84). The host antenna will have a higher gain of 1.88 dBi.

TCB Grant - Application IQqHx63ESR7udZUIpZMduQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 09/15/2015

Application Dated: 09/14/2015

Texas Instruments Incorporated

12500 TI Boulevard

M/S D2000

Dallas, TX 75243

Attention: Marian Kost , Product Line Manager, Connectivity

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	WiFi and Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0 - 2480.0	0.0173

Single Modular Approval. Power listed is conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. (Date of Grant: 02/03/2014)

Class II Permissive Change: This Class II Permissive Change is to add the following antennas: PCB Ethertronics -0.6dBi, Dipole LSR 2dBi, PCB Laird 2dbi, chip Pulse 3.2dBi, PIFA LSR 2dBi, and Chip, TDK 2.4dBi.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Texas Instruments Incorporated
12500 TI Boulevard M/S D2000
Dallas, TX 75243
United States

Date of Grant: 09/15/2015

Application Dated: 09/14/2015

Attention: Marian Kost , Product Line Manager, Connectivity

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	WiFi and Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0 - 2480.0	0.0173

Single Modular Approval. Power listed is conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. (Date of Grant: 02/03/2014)

Class II Permissive Change: This Class II Permissive Change is to add the following antennas: PCB Ethertronics -0.6dBi, Dipole LSR 2dBi, PCB Laird 2dbi, chip Pulse 3.2dBi, PIFA LSR 2dBi, and Chip, TDK 2.4dBi.

TCB Grant - Application 9pO2U3W5blpkiQ7iKYA9Lg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 09/15/2015

Application Dated: 09/14/2015

Texas Instruments Incorporated

12500 TI Boulevard

M/S D2000

Dallas, TX 75243

Attention: Marian Kost , Product Line Manager, Connectivity

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Digital Transmission System
Notes:	WiFi and Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
MO	15C	2402.0 - 2480.0	0.01
MO	15C	2412.0 - 2462.0	0.2438
MO	15C	2422.0 - 2452.0	0.1052

Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth modes. (Date of Grant: 02/03/2014)

Class II Permissive Change: This Class II Permissive Change is to add the following antennas: PCB Ethertronics -0.6dBi, Dipole LSR 2dBi, PCB Laird 2dbi, chip Pulse 3.2dBi, PIFA LSR 2dBi, and Chip, TDK 2.4dBi.

MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Texas Instruments Incorporated
12500 TI Boulevard M/S D2000
Dallas, TX 75243
United States

Date of Grant: 09/15/2015

Application Dated: 09/14/2015

Attention: Marian Kost , Product Line Manager, Connectivity

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Digital Transmission System
Notes:	WiFi and Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
MO	15C	2402.0 - 2480.0	0.01
MO	15C	2412.0 - 2462.0	0.2438
MO	15C	2422.0 - 2452.0	0.1052

Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth modes. (Date of Grant: 02/03/2014)

Class II Permissive Change: This Class II Permissive Change is to add the following antennas: PCB Ethertronics -0.6dBi, Dipole LSR 2dBi, PCB Laird 2dbi, chip Pulse 3.2dBi, PIFA LSR 2dBi, and Chip, TDK 2.4dBi.

MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 5xFeCOIxbBa6tNz/KEqECg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 08/11/2015

Application Dated: 08/11/2015

Texas Instruments Incorporated

12500 TI Boulevard

M/S D2000

Dallas, TX 75243

Attention: Marian Kost , Product Line Manager, Connectivity

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	WIFI AND BLUETOOTH MODULE
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0173

Single Modular Approval. Power listed is conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of -0.36dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. (Original Grant 02/03/2014)

Class II Permissive Change: Limited single modular approval. This permissive change integrates this module into host Emberpulse Home Display/Automation Device, Model BBSE. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures or as evaluated in this filing with module FCCID S4GEM35XB.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Texas Instruments Incorporated
12500 TI Boulevard M/S D2000
Dallas, TX 75243
United States

Date of Grant: 08/11/2015

Application Dated: 08/11/2015

Attention: Marian Kost , Product Line Manager, Connectivity

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	WIFI AND BLUETOOTH MODULE
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0173

Single Modular Approval. Power listed is conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of -0.36dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. (Original Grant 02/03/2014)

Class II Permissive Change: Limited single modular approval. This permissive change integrates this module into host Emberpulse Home Display/Automation Device, Model BBSE. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures or as evaluated in this filing with module FCCID S4GEM35XB.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 35ehzJE2UngnbNLa2bmqFw==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45 <BR>P.O. Box 370,
Newberry, FL 32669

Date of Grant: 02/03/2014

Application Dated: 01/29/2014

Texas Instruments Incorporated

12500 TI Boulevard

M/S 8669

Dallas, TX 75243

Attention: Kelley Foltz , Evaluation Tools Operations Director

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	WIFI AND BLUETOOTH MODULE
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0 - 2480.0	0.0173

Single Modular Approval. Power listed is conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of -0.36dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Texas Instruments Incorporated
12500 TI Boulevard M/S 8669
Dallas, TX 75243
United States

Date of Grant: 02/03/2014

Application Dated: 01/29/2014

Attention: Kelley Foltz , Evaluation Tools Operations Director

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	WIFI AND BLUETOOTH MODULE
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0 - 2480.0	0.0173

Single Modular Approval. Power listed is conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of -0.36dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

TCB Grant - Application 2Asyn1++jv6lwMQq0RCckQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 02/21/2018

Application Dated: 02/14/2018

Texas Instruments Incorporated

12500 TI Boulevard

M/S D2000

Dallas, TX 75243

Attention: Mattias Lange , GM, Embedded Connectivity Solutions

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	WiFi and Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0173

Single Modular Approval. Power listed is maximum combined conducted output power. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.5 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. (Original Grant 02/03/2014) Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021). This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Texas Instruments Incorporated
12500 TI Boulevard M/S D2000
Dallas, TX 75243
United States

Date of Grant: 02/21/2018

Application Dated: 02/14/2018

Attention: Mattias Lange , GM, Embedded Connectivity Solutions

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	WiFi and Bluetooth Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0 - 2480.0	0.0173

Single Modular Approval. Power listed is maximum combined conducted output power. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 2.5 dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. (Original Grant 02/03/2014) Class II Permissive Change: This Class II Permissive Change is to add the following antennas: LSR 2.5 dBi PIFA (P/Ns 001-0016 and 001-0021). This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 1zs9VqwPOB2M69BoI2Icwg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 08/11/2015

Application Dated: 08/11/2015

Texas Instruments Incorporated

12500 TI Boulevard

M/S D2000

Dallas, TX 75243

Attention: Marian Kost , Product Line Manager, Connectivity

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Digital Transmission System
Notes:	WIFI AND BLUETOOTH MODULE
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2402.0 - 2480.0	0.01
CC MO	15C	2412.0 - 2462.0	0.2438
CC MO	15C	2422.0 - 2452.0	0.1052

Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.22dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. (Original Grant 02/03/2014)

Class II Permissive Change: Limited single modular approval. This permissive change integrates this module into host Emberpulse Home Display/Automation Device, Model BBBA. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures or as evaluated in this filing with module FCCID S4GEM35XB.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Texas Instruments Incorporated
12500 TI Boulevard M/S D2000
Dallas, TX 75243
United States

Date of Grant: 08/11/2015

Application Dated: 08/11/2015

Attention: Marian Kost , Product Line Manager, Connectivity

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Digital Transmission System
Notes:	WIFI AND BLUETOOTH MODULE
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2402.0 - 2480.0	0.01
CC MO	15C	2412.0 - 2462.0	0.2438
CC MO	15C	2422.0 - 2452.0	0.1052

Single Modular Approval. Power listed is maximum combined conducted output power. Device operates with specific antennas in MIMO configurations as described in this filing. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. The antenna(s) used for this transmitter must not exceed a maximum gain of 1.22dBi. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. (Original Grant 02/03/2014)

Class II Permissive Change: Limited single modular approval. This permissive change integrates this module into host Emberpulse Home Display/Automation Device, Model BBBA. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures or as evaluated in this filing with module FCCID S4GEM35XB.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 1BmNDu2tkg9TGrgS2B8sww==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669

Date of Grant: 04/17/2015

Application Dated: 04/17/2015

Texas Instruments Incorporated

12500 TI Boulevard

M/S D2000

Dallas, TX 75243

Attention: Marian Kost , Product Line Manager, Connectivity

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Dry erase whiteboard with digital imaging capacity
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0 - 2480.0	0.0173

Limited Single Modular Approval. Power listed is conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. (Date of Grant: 02/03/2014)

Class II Permissive Change: This Class II Permissive Change is to integrate this module into a SMART Technologies Digital Capture Board (model: Kapp84). The host antenna will have a higher gain of 1.88 dBi.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Texas Instruments Incorporated
12500 TI Boulevard M/S D2000
Dallas, TX 75243
United States

Date of Grant: 04/17/2015

Application Dated: 04/17/2015

Attention: Marian Kost , Product Line Manager, Connectivity

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	Z64-WL18SBMOD

Name of Grantee:	Texas Instruments Incorporated

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Dry erase whiteboard with digital imaging capacity
Modular Type:	Limited Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	2402.0 - 2480.0	0.0173

Limited Single Modular Approval. Power listed is conducted. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. (Date of Grant: 02/03/2014)

Class II Permissive Change: This Class II Permissive Change is to integrate this module into a SMART Technologies Digital Capture Board (model: Kapp84). The host antenna will have a higher gain of 1.88 dBi.

Mail To:

WiFi and Bluetooth Module

by Texas Instruments Incorporated

Grantee Code: Z64 Product Code: WL18SBMOD

Latest application date: 2019-06-05

Device Images

FCC ID Device Details

Operating Frequencies

Exhibits

Application Information

Applications

Equipment Authorization

Grants

TCB Grant - Application UvThB7gSBQhd+OXw68h45g==

EAS Grant - Application UvThB7gSBQhd+OXw68h45g==

TCB Grant - Application TY368vBw6JS4cMbzly6teA==

EAS Grant - Application TY368vBw6JS4cMbzly6teA==

TCB Grant - Application TdVCOHN2R1hGvCa9n7UPVA==

EAS Grant - Application TdVCOHN2R1hGvCa9n7UPVA==

TCB Grant - Application OflzPubICMVQgbXKKVEGAQ==

EAS Grant - Application OflzPubICMVQgbXKKVEGAQ==

TCB Grant - Application Ntn1LV+kR73hDgxJr0YQZw==

EAS Grant - Application Ntn1LV+kR73hDgxJr0YQZw==

TCB Grant - Application mkKbhpnFwU3u5z3RI7XuUw==

EAS Grant - Application mkKbhpnFwU3u5z3RI7XuUw==

TCB Grant - Application mh6MEHw+AHG4nejXAIBwjA==

EAS Grant - Application mh6MEHw+AHG4nejXAIBwjA==

TCB Grant - Application LQpA0+KVUpmzIrzGP9fbxw==

EAS Grant - Application LQpA0+KVUpmzIrzGP9fbxw==

TCB Grant - Application lCHL5l0gH/fnpFYDJWrnAQ==

EAS Grant - Application lCHL5l0gH/fnpFYDJWrnAQ==

TCB Grant - Application IQqHx63ESR7udZUIpZMduQ==

EAS Grant - Application IQqHx63ESR7udZUIpZMduQ==

TCB Grant - Application 9pO2U3W5blpkiQ7iKYA9Lg==

EAS Grant - Application 9pO2U3W5blpkiQ7iKYA9Lg==

TCB Grant - Application 5xFeCOIxbBa6tNz/KEqECg==

EAS Grant - Application 5xFeCOIxbBa6tNz/KEqECg==

TCB Grant - Application 35ehzJE2UngnbNLa2bmqFw==

EAS Grant - Application 35ehzJE2UngnbNLa2bmqFw==

TCB Grant - Application 2Asyn1++jv6lwMQq0RCckQ==

EAS Grant - Application 2Asyn1++jv6lwMQq0RCckQ==

TCB Grant - Application 1zs9VqwPOB2M69BoI2Icwg==

EAS Grant - Application 1zs9VqwPOB2M69BoI2Icwg==

TCB Grant - Application 1BmNDu2tkg9TGrgS2B8sww==

EAS Grant - Application 1BmNDu2tkg9TGrgS2B8sww==