FCC ID Z7ZMAXMEDIAWIFI2

WLAN 11n Dual Band Dongle

by MaxMedia Technology Limited

Grantee Code: Z7Z   Product Code: MAXMEDIAWIFI2
Latest application date: 2012-09-12

FCC ID Device Details

FCC IDZ7ZMAXMEDIAWIFI2
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeZ7Z
Product CodeMAXMEDIAWIFI2
Applicant BusinessMaxMedia Technology Limited 🇹🇼
Related Domains maxmediatek.com
Equipment ClassWLAN 11n Dual Band Dongle
Test FirmCerpass Technology Corporation

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2012-09-12
5180-5240 MHzOriginal Equipment2012-09-12

Exhibits

DocumentTypeAvailableFile
ManualUsers Manual2012-09-12PDF 944.1 KB
IntInternal Photos2012-09-12PDF 431.7 KB
ExtExternal Photos2012-09-12PDF 175.4 KB
LabelID Label/Location Info2012-09-12PDF 56.9 KB
Test SetupTest Setup Photos2012-09-12PDF 441.5 KB
DTS 01 r1Test Report2012-09-12PDF 4.9 MB
DTS 02 r1Test Report2012-09-12PDF 4.4 MB
NII r1Test Report2012-09-12PDF 3.8 MB
AuthorizationCover Letter(s)2012-09-12PDF 116.4 KB
ConfidCover Letter(s)2012-09-12PDF 147.9 KB
Modular RequestCover Letter(s)2012-09-12PDF 294.7 KB
RFxRF Exposure Info2012-09-12PDF 39.9 KB

Application Information

Application IDGJNsZERz+q+1qKJ+ABCCvg==
Final Action Date2012-09-12
Application PurposeOriginal Equipment
Applicant FRN0021250501
ModelMAXMEDIAWIFI2
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWLAN 11n Dual Band Dongle
Responsible PartyJason Chu, jason_chu@maxmediatek.com , 886-2-8228-6088
Technical ContactMark Koop, Teleconformity, mark.koop@teleconformity.com , (31)848395876
Test FirmEric Chen, Cerpass Technology Corporation, ericc@cerpass.com.tw , 886-2-2656-1688
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsModular Approval restricted to mobile host products. Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter approval procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
GJNsZERz+q+1qKJ+ABCCvg==2012-09-12Original Equipment
F4Yd0XGnuj3OwDWpuq9vJg==2012-09-12Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.0971715CCC
2422-2452 MHz0.0391815CCC
5180-5240 MHz0.0080915ECC
5190-5230 MHz0.0068415ECC
5745-5825 MHz0.0423115CCC
5755-5795 MHz0.0409415CCC

Grants

TCB Grant - Application GJNsZERz+q+1qKJ+ABCCvg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 09/12/2012

Application Dated: 09/12/2012
MaxMedia Technology Limited
5F., No.113, Jian 2nd Rd., Zhonghe Dist.
New Taipei, 235
Taiwan
 
Attention: Jason Chu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z7ZMAXMEDIAWIFI2
Name of Grantee:  MaxMedia Technology Limited
Equipment Class: Digital Transmission System
Notes: WLAN 11n Dual Band Dongle
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.09717  
CC 15C 2422.0  -  2452.0 0.03918  
CC 15C 5745.0  -  5825.0 0.04231  
CC 15C 5755.0  -  5795.0 0.04094  

Modular Approval restricted to mobile host products. Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter approval procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application GJNsZERz+q+1qKJ+ABCCvg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MaxMedia Technology Limited
5F., No.113, Jian 2nd Rd., Zhonghe Dist. P.O. Box ,
New Taipei, 235
Taiwan
  Date of Grant: 09/12/2012

Application Dated: 09/12/2012
 
Attention: Jason Chu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z7ZMAXMEDIAWIFI2
Name of Grantee:  MaxMedia Technology Limited
Equipment Class: Digital Transmission System
Notes: WLAN 11n Dual Band Dongle
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.09717  
CC 15C 2422.0  -  2452.0 0.03918  
CC 15C 5745.0  -  5825.0 0.04231  
CC 15C 5755.0  -  5795.0 0.04094  

Modular Approval restricted to mobile host products. Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter approval procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application F4Yd0XGnuj3OwDWpuq9vJg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 09/12/2012

Application Dated: 09/12/2012
MaxMedia Technology Limited
5F., No.113, Jian 2nd Rd., Zhonghe Dist.
New Taipei, 235
Taiwan
 
Attention: Jason Chu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z7ZMAXMEDIAWIFI2
Name of Grantee:  MaxMedia Technology Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN 11n Dual Band Dongle
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.00809  
CC 15E 5190.0  -  5230.0 0.00684  

Modular Approval restricted to mobile host products. Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter approval procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application F4Yd0XGnuj3OwDWpuq9vJg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

MaxMedia Technology Limited
5F., No.113, Jian 2nd Rd., Zhonghe Dist. P.O. Box ,
New Taipei, 235
Taiwan
  Date of Grant: 09/12/2012

Application Dated: 09/12/2012
 
Attention: Jason Chu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z7ZMAXMEDIAWIFI2
Name of Grantee:  MaxMedia Technology Limited
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN 11n Dual Band Dongle
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.00809  
CC 15E 5190.0  -  5230.0 0.00684  

Modular Approval restricted to mobile host products. Power Output listed is Conducted. This grant is valid only when the device is supplied to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter approval procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: