FCC ID Z8H89FT0025

CnReach Multi-Layer Element Radio Transceiver

by Cambium Networks Inc.

Grantee Code: Z8H   Product Code: 89FT0025
Latest application date: 2016-10-07

FCC ID Device Details

FCC IDZ8H89FT0025
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeZ8H
Product Code89FT0025
Applicant BusinessCambium Networks Inc. 🇺🇸
Related Domains cambiumnetworks.com
Equipment ClassCnReach Multi-Layer Element Radio Transceiver

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
928 MHzChange in identification of presently authorized equipment. Original FCC ID: PEJ-93829283-MSD9 Grant Date: 10/02/20122016-10-07
902.025-927.975 MHzChange in identification of presently authorized equipment. Original FCC ID: PEJ-93829283-MSD9 Grant Date: 10/02/20122016-10-07

Exhibits

DocumentTypeAvailableFile
External PhotosExternal Photos2016-10-07PDF 155.6 KB
ID LabelID Label/Location Info2016-10-07PDF 104.9 KB
Cover Letter Requesting Change in IDCover Letter(s)2016-10-07PDF 51.4 KB

Application Information

Application IDIq6lSabnrrM11buNlj0DHA==
Final Action Date2016-10-07
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: PEJ-93829283-MSD9 Grant Date: 10/02/2012
Applicant FRN0016216152
Model89FT0025
Frequency Range928 MHz
Equipment ClassTNB - Licensed Non-Broadcast Station Transmitter
Device DescriptionCnReach Multi-Layer Element Radio Transceiver
Responsible PartySteven M. Payne, R.F. Principle Staff Engineer, steve.payne@cambiumnetworks.com , 224-392-5930
TCB Emaildecrowder@elitetest.com
TCB ScopeB4: Microwave, Millimeter Wave Band and Citizens Broadband Radio Services equipment in 47 CFR Parts 25, 30, 74, 90, 95, 96, 97, 101 (all above 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower output listed is at the antenna connector. This device must be professionally installed. The antenna(s) used for this transmitter must not exceed a maximum antenna gain of 12 dBi and must be installed to provide a separation distance of at least 102.5 cm for 12 dBi gain antenna and 51.4 cm for 6 dBi from all persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
Iq6lSabnrrM11buNlj0DHA==2016-10-07Change in identification of presently authorized equipment. Original FCC ID: PEJ-93829283-MSD9 Grant Date: 10/02/2012
7GAyHeugo7FWTmtVCrdF8w==2016-10-07Change in identification of presently authorized equipment. Original FCC ID: PEJ-93829283-MSD9 Grant Date: 10/02/2012

Equipment Authorization

FrequencyOutputToleranceEmissionRules
902.025-927.975 MHz1.000000015C
928-929 MHz41.5ppm9K90F1D101
928 MHz41.5ppm16K8F1D101
932-932.5 MHz41.5ppm9K90F1D101
932-932.5 MHz51.5ppm16K8F1D101
941-941.5 MHz41.5ppm9K90F1D101
941-941.5 MHz51.5ppm16K8F1D101
952-960 MHz41.5ppm9K90F1D101
952-960 MHz51.5ppm16K8F1D101

Grants

TCB Grant - Application Iq6lSabnrrM11buNlj0DHA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 10/07/2016

Application Dated: 10/07/2016
Cambium Networks Inc.
3800 Golf Road
Suite 360
Rolling Meadows, IL 60008
 
Attention: Steven Payne , R.F. Principle Staff Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z8H89FT0025
Name of Grantee:  Cambium Networks Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: CnReach Multi-Layer Element Radio Transceiver
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
101 928.0  -  929.0 4.0 1.5  PM 9K90F1D
101 932.0  -  932.5 4.0 1.5  PM 9K90F1D
101 941.0  -  941.5 4.0 1.5  PM 9K90F1D
101 952.0  -  960.0 4.0 1.5  PM 9K90F1D
101 928.0  -  928.0 4.0 1.5  PM 16K8F1D
101 932.0  -  932.5 5.0 1.5  PM 16K8F1D
101 941.0  -  941.5 5.0 1.5  PM 16K8F1D
101 952.0  -  960.0 5.0 1.5  PM 16K8F1D

Power output listed is at the antenna connector. This device must be professionally installed. The antenna(s) used for this transmitter must not exceed a maximum antenna gain of 12 dBi and must be installed to provide a separation distance of at least 102.5 cm for 12 dBi gain antenna and 51.4 cm for 6 dBi from all persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application Iq6lSabnrrM11buNlj0DHA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cambium Networks Inc.
3800 Golf Road Suite 360
Rolling Meadows, IL 60008
United States
  Date of Grant: 10/07/2016

Application Dated: 10/07/2016
 
Attention: Steven Payne , R.F. Principle Staff Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z8H89FT0025
Name of Grantee:  Cambium Networks Inc.
Equipment Class: Licensed Non-Broadcast Station Transmitter
Notes: CnReach Multi-Layer Element Radio Transceiver
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
101 928.0  -  929.0 4.0 1.5  PM 9K90F1D
101 932.0  -  932.5 4.0 1.5  PM 9K90F1D
101 941.0  -  941.5 4.0 1.5  PM 9K90F1D
101 952.0  -  960.0 4.0 1.5  PM 9K90F1D
101 928.0  -  928.0 4.0 1.5  PM 16K8F1D
101 932.0  -  932.5 5.0 1.5  PM 16K8F1D
101 941.0  -  941.5 5.0 1.5  PM 16K8F1D
101 952.0  -  960.0 5.0 1.5  PM 16K8F1D

Power output listed is at the antenna connector. This device must be professionally installed. The antenna(s) used for this transmitter must not exceed a maximum antenna gain of 12 dBi and must be installed to provide a separation distance of at least 102.5 cm for 12 dBi gain antenna and 51.4 cm for 6 dBi from all persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application 7GAyHeugo7FWTmtVCrdF8w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Elite Electronic Engineering, Inc.
1516 Centre Circle
Downers Grove, IL 60515
Date of Grant: 10/07/2016

Application Dated: 10/07/2016
Cambium Networks Inc.
3800 Golf Road
Suite 360
Rolling Meadows, IL 60008
 
Attention: Steven Payne , R.F. Principle Staff Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z8H89FT0025
Name of Grantee:  Cambium Networks Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: CnReach Multi-Layer Element Radio Transceiver
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.025  -  927.975 1.0  

Power Output listed is Conducted. Limited Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 46 cm from all persons with the 12 dBi gain antenna and 23 cm from all persons with the 6 dBi gain antenna and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the grantee. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application 7GAyHeugo7FWTmtVCrdF8w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Cambium Networks Inc.
3800 Golf Road Suite 360
Rolling Meadows, IL 60008
United States
  Date of Grant: 10/07/2016

Application Dated: 10/07/2016
 
Attention: Steven Payne , R.F. Principle Staff Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  Z8H89FT0025
Name of Grantee:  Cambium Networks Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: CnReach Multi-Layer Element Radio Transceiver
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.025  -  927.975 1.0  

Power Output listed is Conducted. Limited Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 46 cm from all persons with the 12 dBi gain antenna and 23 cm from all persons with the 6 dBi gain antenna and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the grantee. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: