FCC ID ZJN-E9800

GSM Mobile Phone - WiFi Portion

by EYO ASIA ELECTRONIC CO.,LTD

Grantee Code: ZJN   Product Code: E9800
Latest application date: 2011-06-29

FCC ID Device Details

FCC IDZJN-E9800
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeZJN
Product CodeE9800
Applicant BusinessEYO ASIA ELECTRONIC CO.,LTD 🇨🇳
Equipment ClassGSM Mobile Phone - WiFi Portion
Test FirmMost Technology Service Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2011-06-29
824.2-848.8 MHzOriginal Equipment2011-06-29
2402-2480 MHzOriginal Equipment2011-06-29

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2011-06-29PDF 412.8 KB
Internal PhotoInternal Photos2011-06-29PDF 408.8 KB
External PhotoExternal Photos2011-06-29PDF 248.5 KB
LabelID Label/Location Info2011-06-29PDF 96.8 KB
Label & LocationID Label/Location Info2011-06-29PDF 96.8 KB
Label & locationID Label/Location Info2011-06-29PDF 96.8 KB
Block DiagramBlock Diagram2011-06-29PDF 261.3 KB
SchematicsSchematics2011-06-29PDF 351.1 KB
Operational DescriptionOperational Description2011-06-29PDF 861 KB
Setup PhotoTest Setup Photos2011-06-29PDF 148.3 KB
Setup PhotoTest Setup Photos2011-06-29PDF 114.5 KB
Setup PhotoTest Setup Photos2011-06-29PDF 221.4 KB
SAR ReportTest Report2011-06-29PDF 2 MB
Test ReportTest Report2011-06-29PDF 1.6 MB
Test ReportTest Report2011-06-29PDF 789.2 KB
Test Report-22HTest Report2011-06-29PDF 666.2 KB
Test Report-24ETest Report2011-06-29PDF 823.1 KB
DOC LetterCover Letter(s)2011-06-29PDF 31 KB
Authorization LetterCover Letter(s)2011-06-29PDF 63.4 KB
Part ListParts List/Tune Up Info2011-06-29PDF 73 KB
SAR Report 1 of 4RF Exposure Info2011-06-29PDF 2.1 MB
SAR Report 1of 4RF Exposure Info2011-06-29PDF 2.1 MB
SAR Report 2 of 4RF Exposure Info2011-06-29PDF 2.2 MB
SAR Report 3 of 4RF Exposure Info2011-06-29PDF 5.5 MB
SAR Report 4 of 4RF Exposure Info2011-06-29PDF 292.5 KB
Tune Up ProcedureParts List/Tune Up Info2011-06-29PDF 193.9 KB

Application Information

Application IDQDLr3yJl4xEL0l+CrC6JjQ==
Final Action Date2011-06-29
Application PurposeOriginal Equipment
Applicant FRN0020837977
Model-E9800
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionGSM Mobile Phone - WiFi Portion
Responsible PartyJianQiu He, Vice General Manager, 1410330502@qq.com , (86) 755-83955692
Test FirmMark Wen, Most Technology Service Co., Ltd., szmost@szmost.com , 86-755-86170306
TCB Emailtcb@siemic.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsThis device was tested with a 1.5 cm device-to-body spacing gap and was not tested with any body-worn accessories made by any other manufacturer. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported DTS SAR values are: Head: 0.39 W/kg, Body-worn: 039 W/kg. .

Applications

Application IDDatePurpose
QDLr3yJl4xEL0l+CrC6JjQ==2011-06-29Original Equipment
B0xg+48QAJALv7LI/UIxlg==2011-06-29Original Equipment
/3T1CvBHYpMkYiBUf9KOKQ==2011-06-29Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
824.2-848.8 MHz1.7548.09Hz293KG7W22H
1850.2-1909.8 MHz0.8351.63Hz293KG7W24E
2402-2480 MHz15CCC
2412-2462 MHz0.054000015CCC

Grants

TCB Grant - Application QDLr3yJl4xEL0l+CrC6JjQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 06/29/2011

Application Dated: 06/29/2011
EYO ASIA ELECTRONIC CO.,LTD
Room 2128,Block A, QunXing Plaza,
HuaQiangNorth Road, Futian District,
Shenzhen,
China
 
Attention: JianQiu He , Vice General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZJN-E9800
Name of Grantee:  EYO ASIA ELECTRONIC CO.,LTD
Equipment Class: Digital Transmission System
Notes: GSM Mobile Phone - WiFi Portion
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.054  

This device was tested with a 1.5 cm device-to-body spacing gap and was not tested with any body-worn accessories made by any other manufacturer. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported DTS SAR values are: Head: 0.39 W/kg, Body-worn: 039 W/kg. .

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application QDLr3yJl4xEL0l+CrC6JjQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

EYO ASIA ELECTRONIC CO.,LTD
Room 2128,Block A, QunXing Plaza, HuaQiangNorth Road, Futian District,P.O. Box ,
Shenzhen,
China
  Date of Grant: 06/29/2011

Application Dated: 06/29/2011
 
Attention: JianQiu He , Vice General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZJN-E9800
Name of Grantee:  EYO ASIA ELECTRONIC CO.,LTD
Equipment Class: Digital Transmission System
Notes: GSM Mobile Phone - WiFi Portion
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.054  

This device was tested with a 1.5 cm device-to-body spacing gap and was not tested with any body-worn accessories made by any other manufacturer. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported DTS SAR values are: Head: 0.39 W/kg, Body-worn: 039 W/kg. .


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application B0xg+48QAJALv7LI/UIxlg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 06/29/2011

Application Dated: 06/29/2011
EYO ASIA ELECTRONIC CO.,LTD
Room 2128,Block A, QunXing Plaza,
HuaQiangNorth Road, Futian District,
Shenzhen,
China
 
Attention: JianQiu He , Vice General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZJN-E9800
Name of Grantee:  EYO ASIA ELECTRONIC CO.,LTD
Equipment Class: PCS Licensed Transmitter held to ear
Notes: GSM Mobile Phone - GSM Portion
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.75 48.09  Hz 293KG7W
24E 1850.2  -  1909.8 0.83 51.63  Hz 293KG7W

Output power is ERP/EIRP. This device was tested with a 1.5 cm device-to-body spacing gap and was not tested with any body-worn accessories made by any other manufacturer. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

The highest reported SAR values are: Part 22 Head: 0.40 W/kg, Body-worn: 040 W/kg.; part 24, Head: 0.39 W/kg, Body-worn: 0.38 W/kg.


EAS Grant - Application B0xg+48QAJALv7LI/UIxlg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

EYO ASIA ELECTRONIC CO.,LTD
Room 2128,Block A, QunXing Plaza, HuaQiangNorth Road, Futian District,P.O. Box ,
Shenzhen,
China
  Date of Grant: 06/29/2011

Application Dated: 06/29/2011
 
Attention: JianQiu He , Vice General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZJN-E9800
Name of Grantee:  EYO ASIA ELECTRONIC CO.,LTD
Equipment Class: PCS Licensed Transmitter held to ear
Notes: GSM Mobile Phone - GSM Portion
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.75 48.09  Hz 293KG7W
24E 1850.2  -  1909.8 0.83 51.63  Hz 293KG7W

Output power is ERP/EIRP. This device was tested with a 1.5 cm device-to-body spacing gap and was not tested with any body-worn accessories made by any other manufacturer. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.5 cm separation between the device and the user body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

The highest reported SAR values are: Part 22 Head: 0.40 W/kg, Body-worn: 040 W/kg.; part 24, Head: 0.39 W/kg, Body-worn: 0.38 W/kg.



TCB Grant - Application /3T1CvBHYpMkYiBUf9KOKQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 06/29/2011

Application Dated: 06/29/2011
EYO ASIA ELECTRONIC CO.,LTD
Room 2128,Block A, QunXing Plaza,
HuaQiangNorth Road, Futian District,
Shenzhen,
China
 
Attention: JianQiu He , Vice General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZJN-E9800
Name of Grantee:  EYO ASIA ELECTRONIC CO.,LTD
Equipment Class: Part 15 Low Power Transceiver, Rx Verified
Notes: GSM Mobile Phone - Bluetooth Portion
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0  

End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application /3T1CvBHYpMkYiBUf9KOKQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

EYO ASIA ELECTRONIC CO.,LTD
Room 2128,Block A, QunXing Plaza, HuaQiangNorth Road, Futian District,P.O. Box ,
Shenzhen,
China
  Date of Grant: 06/29/2011

Application Dated: 06/29/2011
 
Attention: JianQiu He , Vice General Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZJN-E9800
Name of Grantee:  EYO ASIA ELECTRONIC CO.,LTD
Equipment Class: Part 15 Low Power Transceiver, Rx Verified
Notes: GSM Mobile Phone - Bluetooth Portion
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0  

End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: