FCC ID ZLPEDGE3A1

EDGE3

by EtherWAN Systems

Grantee Code: ZLP   Product Code: EDGE3A1
Latest application date: 2026-08-20

FCC ID Device Details

FCC IDZLPEDGE3A1
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeZLP
Product CodeEDGE3A1
Applicant BusinessEtherWAN Systems 🇹🇼
Related Domains etherwan.com.tw etherwan.com
Equipment ClassEDGE3
Test FirmSGS North America, Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: VPYLB2AE Grant Date: 07/26/20222026-08-20
5745-5825 MHzChange in identification of presently authorized equipment. Original FCC ID: VPYLB2AE Grant Date: 07/27/20222026-08-20
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: VPYLB2AE Grant Date: 07/26/20222026-08-20

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2026-08-20PDF 1.2 MB
External PhotoExternal Photos2026-08-20PDF 662.3 KB
External photoExternal Photos2026-08-20PDF 662.3 KB
Device too small for LabelID Label/Location Info2026-08-20PDF 337.9 KB
Applicant cover letterAttestation Statements2026-08-20PDF 212.8 KB
US Agent letterAttestation Statements2026-08-20PDF 268.6 KB
Change ID request letter by original applicantCover Letter(s)2026-08-20PDF 122.3 KB
New Grantee DeclarationCover Letter(s)2026-08-20PDF 95.1 KB
POACover Letter(s)2026-08-20PDF 79.2 KB

Application Information

Application IDPPgsxaUkKfIp5LwUNBWbQw==
Final Action Date2026-08-20
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: VPYLB2AE Grant Date: 07/26/2022
Applicant FRN0020880332
ModelEDGE3A1
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionEDGE3
Responsible PartyYING JEN CHEN, jason.chen@etherwan.com.tw , +886266298986
Technical ContactSharon Cheng, SGS Taiwan Ltd., Sharon.cheng@sgs.com , +886 2 2299 3279
Non-Technical ContactCraig Dewalt, EtherWAN Systems, Inc., craig.dewalt@etherwan.com , (949) 202-9531
Test FirmDavid Schramm, SGS North America, Inc., david.schramm@sgs.com , 973-461-7914
TCB EmailUSCTS.TCB@SGS.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
PPgsxaUkKfIp5LwUNBWbQw==2026-08-20Change in identification of presently authorized equipment. Original FCC ID: VPYLB2AE Grant Date: 07/26/2022
G73nUQ1I0R4dvYhon6ezdA==2026-08-20Change in identification of presently authorized equipment. Original FCC ID: VPYLB2AE Grant Date: 07/27/2022
CfYLv0exMq38zI+7NrK3xw==2026-08-20Change in identification of presently authorized equipment. Original FCC ID: VPYLB2AE Grant Date: 07/26/2022

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.004815CCC
5180-5240 MHz0.049715ECC
5260-5320 MHz0.066215ECC
5500-5720 MHz0.062215ECC
5745-5825 MHz0.058215ECC
2402-2480 MHz0.003715CCC
2412-2462 MHz0.071315CCC

Grants

TCB Grant - Application PPgsxaUkKfIp5LwUNBWbQw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 08/20/2026

Application Dated: 08/14/2026
EtherWAN Systems
33 F., No. 93, Sec. 1, Xintai 5th Rd.
Xizhi Dist.
New Taipei, 221
Taiwan
 
Attention: YING JEN CHEN , Assistant Technical Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZLPEDGE3A1
Name of Grantee:  EtherWAN Systems
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: EDGE3
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0048  

Modular approval. Output power listed is conducted. This module may only be installed by the OEM or an OEM integrator. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device. Other configurations or co-location with other transmitters requires additional evaluation and certification. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application G73nUQ1I0R4dvYhon6ezdA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 08/20/2026

Application Dated: 08/14/2026
EtherWAN Systems
33 F., No. 93, Sec. 1, Xintai 5th Rd.
Xizhi Dist.
New Taipei, 221
Taiwan
 
Attention: YING JEN CHEN , Assistant Technical Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZLPEDGE3A1
Name of Grantee:  EtherWAN Systems
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: EDGE3
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0497  
CC 15E 5260.0  -  5320.0 0.0662  
CC 15E 5500.0  -  5720.0 0.0622  
CC 15E 5745.0  -  5825.0 0.0582  

Modular approval. Output power listed is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device supports 20MHz/40MHz/80MHz bandwidth for 5GHz WLAN. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device. Other configurations or co-location with other transmitters requires additional evaluation and certification. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application CfYLv0exMq38zI+7NrK3xw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
Date of Grant: 08/20/2026

Application Dated: 08/14/2026
EtherWAN Systems
33 F., No. 93, Sec. 1, Xintai 5th Rd.
Xizhi Dist.
New Taipei, 221
Taiwan
 
Attention: YING JEN CHEN , Assistant Technical Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZLPEDGE3A1
Name of Grantee:  EtherWAN Systems
Equipment Class: Digital Transmission System
Notes: EDGE3
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0037  
CC 15C 2412.0  -  2462.0 0.0713  

Modular approval. Output power listed is conducted. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. This device supports BLE and 20MHz bandwidth for 2.4GHz WLAN. This module may only be installed by the OEM or an OEM integrator. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter within a host device. Other configurations or co-location with other transmitters requires additional evaluation and certification. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.