1. FCC ID
  2. ZMO
  3. ZMONL668AM00

FCC ID ZMONL668AM00

LTE module

by Fibocom Wireless Inc.

Grantee Code: ZMO   Product Code: NL668AM00
Latest application date: 2025-02-06

FCC ID Device Details

FCC IDZMONL668AM00
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeZMO
Product CodeNL668AM00
Applicant BusinessFibocom Wireless Inc. 🇨🇳
Related Domains fibocom.com
Equipment ClassLTE module
Test FirmSporton International Inc. (Kunshan)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
1860-1900 MHzClass II permissive change or modification of presently authorized equipment2025-02-06
673-688 MHzClass II permissive change or modification of presently authorized equipment2021-08-17
673-688 MHzClass II permissive change or modification of presently authorized equipment2020-10-15
673-688 MHzClass II permissive change or modification of presently authorized equipment2018-12-24
673-688 MHzOriginal Equipment2018-11-29

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2025-02-06PDF 1.6 MB
User ManualUsers Manual2022-02-13PDF 909.7 KB
User manualUsers Manual2020-10-15PDF 1.5 MB
User manualUsers Manual2019-06-19PDF 2 MB
User manualUsers Manual2019-05-28PDF 1.4 MB
Internal PhotosInternal Photos2022-02-13PDF 4.1 MB
Internal photosInternal Photos2020-10-15PDF 794.4 KB
Internal photosInternal Photos2019-06-19PDF 907.8 KB
Internal photosInternal Photos2019-05-28PDF 842.6 KB
External PhotosExternal Photos2022-02-13PDF 583.2 KB
External photosExternal Photos2020-10-15PDF 278.7 KB
External photosExternal Photos2019-06-19PDF 1.4 MB
External photosExternal Photos2019-05-28PDF 1.7 MB
Label_locationID Label/Location Info2021-08-17PDF 906.3 KB
LabelID Label/Location Info2018-11-29PDF 61.5 KB
Label locationID Label/Location Info2018-11-29PDF 39.9 KB
Test setup 3GTest Setup Photos2025-02-06PDF 185.3 KB
Test setup LTETest Setup Photos2025-02-06PDF 362.9 KB
Test Setup PhotosTest Setup Photos2022-02-13PDF 251.8 KB
Test setupTest Setup Photos2020-10-15PDF 152.9 KB
Test setupTest Setup Photos2019-06-19PDF 342.9 KB
Test setupTest Setup Photos2019-05-28PDF 164.9 KB
Test setup LTETest Setup Photos2019-05-28PDF 244.5 KB
Test report 3GTest Report2025-02-06PDF 898.3 KB
Test report LTETest Report2025-02-06PDF 1.4 MB
Test Report_3G,4G(Part22,24,27)Test Report2021-08-17PDF 987.1 KB
Test reportTest Report2020-10-15PDF 1.6 MB
Test reportTest Report2018-12-24PDF 1.5 MB
Test reportTest Report2018-11-29PDF 2.7 MB
Test report LTE part 1Test Report2018-11-29PDF 5.4 MB
Test report LTE part 10Test Report2018-11-29PDF 5.3 MB
Test report LTE part 11Test Report2018-11-29PDF 3.5 MB
Test report LTE part 2Test Report2018-11-29PDF 5.4 MB
Test report LTE part 3Test Report2018-11-29PDF 5.3 MB
Test report LTE part 4Test Report2018-11-29PDF 5.3 MB
Test report LTE part 5Test Report2018-11-29PDF 5.4 MB
Test report LTE part 6Test Report2018-11-29PDF 5.3 MB
Test report LTE part 7Test Report2018-11-29PDF 5.4 MB
Test report LTE part 8Test Report2018-11-29PDF 5.4 MB
Test report LTE part 9Test Report2018-11-29PDF 5.2 MB
Covered equipment list attestationAttestation Statements2025-02-06PDF 107.4 KB
US agent designation attestationAttestation Statements2025-02-06PDF 269.1 KB
Agent letterCover Letter(s)2025-02-06PDF 29.1 KB
Confidentiality request letterCover Letter(s)2025-02-06PDF 84.1 KB
Permissive change letterCover Letter(s)2025-02-06PDF 135.9 KB
Product Equality DeclarationCover Letter(s)2025-02-06PDF 37.4 KB
Authorization LetterCover Letter(s)2021-08-17PDF 101.6 KB
C2PC letterCover Letter(s)2021-08-17PDF 133.8 KB
Confidentiality Request letterCover Letter(s)2021-08-17PDF 142 KB
External Authorization LetterCover Letter(s)2021-08-17PDF 139.5 KB
FCC Class II Permissive Change RequestCover Letter(s)2021-08-17PDF 120.5 KB
Cover letterCover Letter(s)2020-10-15PDF 88.7 KB
Cover letterCover Letter(s)2018-12-24PDF 76.2 KB
Cover letterCover Letter(s)2018-11-29PDF 103.8 KB
RF ExposureRF Exposure Info2025-02-06PDF 361.2 KB
MPERF Exposure Info2021-08-17PDF 1.2 MB
RF ExposureRF Exposure Info2018-11-29PDF 853.3 KB
Block Diagram Metadata onlyBlock DiagramPDF 50 KB
Schematics Metadata onlySchematicsPDF 198 KB
Antenna specification Metadata onlyOperational DescriptionPDF 516.7 KB
Operational Description Metadata onlyOperational DescriptionPDF 210.9 KB
Parts list Metadata onlyParts List/Tune Up InfoPDF 35.1 KB
Parts list Metadata onlyParts List/Tune Up InfoPDF 37.4 KB
Tune up Metadata onlyParts List/Tune Up InfoPDF 74.1 KB
Tune up Metadata onlyParts List/Tune Up InfoPDF 98.7 KB
Tune-up procedure Metadata onlyParts List/Tune Up InfoPDF 73.7 KB

Application Information

Application IDPteAVdD6THNg3Yq00RnHxA==
Final Action Date2025-02-06
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0020891057
ModelNL668AM00
Frequency Range1860-1900 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionLTE module
Responsible PartyPatrick Ma, Certification Director, mapx@fibocom.com , +8675526733555
Test FirmJim Tsai, Sporton International Inc. (Kunshan), JimTsai@sporton.com.tw , +86 0512 57900158
TCB EmailTCB@nemko.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the End-Users has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 7 dBi at 600 MHz, 700 MHz, 850 MHz, 1900 MHz, and 5 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, 24 and 27. Class II Permissive Change: antennas change and turn off GNSS via software.

Applications

Application IDDatePurpose
PteAVdD6THNg3Yq00RnHxA==2025-02-06Class II permissive change or modification of presently authorized equipment
wjkoq2VT8e/c9MJbZlYvLA==2021-08-17Class II permissive change or modification of presently authorized equipment
3rNkiDhhSJmU6kxIiFkbOQ==2020-10-15Class II permissive change or modification of presently authorized equipment
ARlojSFa2Q74KAs/4GdtRA==2018-12-24Class II permissive change or modification of presently authorized equipment
1fATH3bNy0Y8+OT49wWvkg==2018-11-29Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
673-688 MHz0.24380.0151ppm18M3G7D27
673-688 MHz0.19910.0151ppm18M3W7D27
704-711 MHz0.22590.002ppm9M03G7D27
704-711 MHz0.18030.002ppm9M05W7D27
706.5-713.5 MHz0.17820.0038ppm4M49W7D27
709-711 MHz0.22390.0038ppm8M99G7D27
709-711 MHz0.1770.0038ppm9M05W7D27
779.5-784.5 MHz0.1690.0018ppm4M50W7D27
782 MHz0.21090.0018ppm8M99G7D27
782 MHz0.16070.0018ppm9M01W7D27
824.7-848.3 MHz0.1560.0018ppm1M10W7D22H
829-844 MHz0.19320.0018ppm9M05G7D22H
829-844 MHz0.14830.0018ppm8M97W7D22H
1712.4-1752.6 MHz0.23660.0551ppm4M13F9W27
1715-1775 MHz0.18840.001ppm9M01W7D27
1715-1750 MHz0.16180.0006ppm9M09W7D27
1720-1770 MHz0.23070.001ppm18M4G7D27
1720-1770 MHz0.17260.001ppm18M4W7D27
1720-1745 MHz0.20280.0006ppm18M4G7D27
1720-1745 MHz0.15450.0006ppm18M3W7D27
1857.5-1902.5 MHz0.17180.0123ppm13M5W7D24E
1860-1900 MHz0.21430.0123ppm18M5G7D24E

Grants

TCB Grant - Application wjkoq2VT8e/c9MJbZlYvLA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
 Date of Grant: 08/17/2021

Application Dated: 08/17/2021
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMONL668AM00
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: LTE module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24E 1852.4  -  1907.6 0.2612 0.0105  PM 4M12F9W
27 1712.4  -  1752.6 0.2366 0.0551  PM 4M13F9W
24E 1860.0  -  1900.0 0.2143 0.0123  PM 18M5G7D
24E 1860.0  -  1900.0 0.1633 0.0123  PM 18M4W7D
24E 1857.5  -  1902.5 0.1718 0.0123  PM 13M5W7D
27 1720.0  -  1745.0 0.2028 0.0006  PM 18M4G7D
27 1720.0  -  1745.0 0.1545 0.0006  PM 18M3W7D
27 1715.0  -  1750.0 0.1618 0.0006  PM 9M09W7D
22H 829.0  -  844.0 0.1932 0.0018  PM 9M05G7D
22H 829.0  -  844.0 0.1483 0.0018  PM 8M97W7D
22H 824.7  -  848.3 0.156 0.0018  PM 1M10W7D
27 704.0  -  711.0 0.2259 0.002  PM 9M03G7D
27 704.0  -  711.0 0.1803 0.002  PM 9M05W7D
27 1720.0  -  1770.0 0.2307 0.001  PM 18M4G7D
27 1720.0  -  1770.0 0.1726 0.001  PM 18M4W7D
27 1715.0  -  1775.0 0.1884 0.001  PM 9M01W7D
27 673.0  -  688.0 0.2438 0.0151  PM 18M3G7D
27 673.0  -  688.0 0.1991 0.0151  PM 18M3W7D

Class II permissive change to be integrated in the specific portable Notebook Computer (Samsung XE345XDA, XE345XDA-MA1TM) with antenna and disabled some frequency bands (WCDMA B5 and LTE B13, B17) by software that described in this filing.

Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the End-Users has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 7 dBi at 600 MHz, 700 MHz, 850 MHz, 1900 MHz, and 5 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, 24 and 27.


EAS Grant - Application wjkoq2VT8e/c9MJbZlYvLA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China 		  Date of Grant: 08/17/2021

Application Dated: 08/17/2021
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMONL668AM00
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: LTE module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24E 1852.4  -  1907.6 0.2612 0.0105  PM 4M12F9W
27 1712.4  -  1752.6 0.2366 0.0551  PM 4M13F9W
24E 1860.0  -  1900.0 0.2143 0.0123  PM 18M5G7D
24E 1860.0  -  1900.0 0.1633 0.0123  PM 18M4W7D
24E 1857.5  -  1902.5 0.1718 0.0123  PM 13M5W7D
27 1720.0  -  1745.0 0.2028 0.0006  PM 18M4G7D
27 1720.0  -  1745.0 0.1545 0.0006  PM 18M3W7D
27 1715.0  -  1750.0 0.1618 0.0006  PM 9M09W7D
22H 829.0  -  844.0 0.1932 0.0018  PM 9M05G7D
22H 829.0  -  844.0 0.1483 0.0018  PM 8M97W7D
22H 824.7  -  848.3 0.156 0.0018  PM 1M10W7D
27 704.0  -  711.0 0.2259 0.002  PM 9M03G7D
27 704.0  -  711.0 0.1803 0.002  PM 9M05W7D
27 1720.0  -  1770.0 0.2307 0.001  PM 18M4G7D
27 1720.0  -  1770.0 0.1726 0.001  PM 18M4W7D
27 1715.0  -  1775.0 0.1884 0.001  PM 9M01W7D
27 673.0  -  688.0 0.2438 0.0151  PM 18M3G7D
27 673.0  -  688.0 0.1991 0.0151  PM 18M3W7D

Class II permissive change to be integrated in the specific portable Notebook Computer (Samsung XE345XDA, XE345XDA-MA1TM) with antenna and disabled some frequency bands (WCDMA B5 and LTE B13, B17) by software that described in this filing.

Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the End-Users has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 7 dBi at 600 MHz, 700 MHz, 850 MHz, 1900 MHz, and 5 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, 24 and 27.



TCB Grant - Application PteAVdD6THNg3Yq00RnHxA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, Inc.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 02/06/2025

Application Dated: 01/23/2025
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Patrick Ma , Certification Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMONL668AM00
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: LTE module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 826.4  -  846.6 0.2254 0.0411  PM 4M31F9W
24E 1852.4  -  1907.6 0.2612 0.0105  PM 4M12F9W
27 1712.4  -  1752.6 0.2366 0.0551  PM 4M13F9W
24E 1860.0  -  1900.0 0.2143 0.0123  PM 18M5G7D
24E 1860.0  -  1900.0 0.1633 0.0123  PM 18M4W7D
24E 1857.5  -  1902.5 0.1718 0.0123  PM 13M5W7D
27 1720.0  -  1745.0 0.2028 0.0006  PM 18M4G7D
27 1720.0  -  1745.0 0.1545 0.0006  PM 18M3W7D
27 1715.0  -  1750.0 0.1618 0.0006  PM 9M09W7D
22H 829.0  -  844.0 0.1932 0.0018  PM 9M05G7D
22H 829.0  -  844.0 0.1483 0.0018  PM 8M97W7D
22H 824.7  -  848.3 0.156 0.0018  PM 1M10W7D
27 704.0  -  711.0 0.2259 0.002  PM 9M03G7D
27 704.0  -  711.0 0.1803 0.002  PM 9M05W7D
27 782.0  -  782.0 0.2109 0.0018  PM 8M99G7D
27 782.0  -  782.0 0.1607 0.0018  PM 9M01W7D
27 779.5  -  784.5 0.169 0.0018  PM 4M50W7D
27 709.0  -  711.0 0.2239 0.0038  PM 8M99G7D
27 709.0  -  711.0 0.177 0.0038  PM 9M05W7D
27 706.5  -  713.5 0.1782 0.0038  PM 4M49W7D
27 1720.0  -  1770.0 0.2307 0.001  PM 18M4G7D
27 1720.0  -  1770.0 0.1726 0.001  PM 18M4W7D
27 1715.0  -  1775.0 0.1884 0.001  PM 9M01W7D
27 673.0  -  688.0 0.2438 0.0151  PM 18M3G7D
27 673.0  -  688.0 0.1991 0.0151  PM 18M3W7D

Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the End-Users has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 7 dBi at 600 MHz, 700 MHz, 850 MHz, 1900 MHz, and 5 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, 24 and 27.

Class II Permissive Change: antennas change and turn off GNSS via software.


EAS Grant - Application PteAVdD6THNg3Yq00RnHxA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China 		  Date of Grant: 02/06/2025

Application Dated: 01/23/2025
 
Attention: Patrick Ma , Certification Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMONL668AM00
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: LTE module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 826.4  -  846.6 0.2254 0.0411  PM 4M31F9W
24E 1852.4  -  1907.6 0.2612 0.0105  PM 4M12F9W
27 1712.4  -  1752.6 0.2366 0.0551  PM 4M13F9W
24E 1860.0  -  1900.0 0.2143 0.0123  PM 18M5G7D
24E 1860.0  -  1900.0 0.1633 0.0123  PM 18M4W7D
24E 1857.5  -  1902.5 0.1718 0.0123  PM 13M5W7D
27 1720.0  -  1745.0 0.2028 0.0006  PM 18M4G7D
27 1720.0  -  1745.0 0.1545 0.0006  PM 18M3W7D
27 1715.0  -  1750.0 0.1618 0.0006  PM 9M09W7D
22H 829.0  -  844.0 0.1932 0.0018  PM 9M05G7D
22H 829.0  -  844.0 0.1483 0.0018  PM 8M97W7D
22H 824.7  -  848.3 0.156 0.0018  PM 1M10W7D
27 704.0  -  711.0 0.2259 0.002  PM 9M03G7D
27 704.0  -  711.0 0.1803 0.002  PM 9M05W7D
27 782.0  -  782.0 0.2109 0.0018  PM 8M99G7D
27 782.0  -  782.0 0.1607 0.0018  PM 9M01W7D
27 779.5  -  784.5 0.169 0.0018  PM 4M50W7D
27 709.0  -  711.0 0.2239 0.0038  PM 8M99G7D
27 709.0  -  711.0 0.177 0.0038  PM 9M05W7D
27 706.5  -  713.5 0.1782 0.0038  PM 4M49W7D
27 1720.0  -  1770.0 0.2307 0.001  PM 18M4G7D
27 1720.0  -  1770.0 0.1726 0.001  PM 18M4W7D
27 1715.0  -  1775.0 0.1884 0.001  PM 9M01W7D
27 673.0  -  688.0 0.2438 0.0151  PM 18M3G7D
27 673.0  -  688.0 0.1991 0.0151  PM 18M3W7D

Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the End-Users has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 7 dBi at 600 MHz, 700 MHz, 850 MHz, 1900 MHz, and 5 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, 24 and 27.

Class II Permissive Change: antennas change and turn off GNSS via software.



TCB Grant - Application ARlojSFa2Q74KAs/4GdtRA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 12/24/2018

Application Dated: 12/21/2018
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMONL668AM00
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: LTE module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 826.4  -  846.6 0.2254 0.0411  PM 4M31F9W
24E 1852.4  -  1907.6 0.2612 0.0105  PM 4M12F9W
27 1712.4  -  1752.6 0.2366 0.0551  PM 4M13F9W
24E 1860.0  -  1900.0 0.2143 0.0123  PM 18M5G7D
24E 1860.0  -  1900.0 0.1633 0.0123  PM 18M4W7D
24E 1857.5  -  1902.5 0.1718 0.0123  PM 13M5W7D
27 1720.0  -  1745.0 0.2028 0.0006  PM 18M4G7D
27 1720.0  -  1745.0 0.1545 0.0006  PM 18M3W7D
27 1715.0  -  1750.0 0.1618 0.0006  PM 9M09W7D
22H 829.0  -  844.0 0.1932 0.0018  PM 9M05G7D
22H 829.0  -  844.0 0.1483 0.0018  PM 8M97W7D
22H 824.7  -  848.3 0.156 0.0018  PM 1M10W7D
27 704.0  -  711.0 0.2259 0.002  PM 9M03G7D
27 704.0  -  711.0 0.1803 0.002  PM 9M05W7D
27 782.0  -  782.0 0.2109 0.0018  PM 8M99G7D
27 782.0  -  782.0 0.1607 0.0018  PM 9M01W7D
27 779.5  -  784.5 0.169 0.0018  PM 4M50W7D
27 709.0  -  711.0 0.2239 0.0038  PM 8M99G7D
27 709.0  -  711.0 0.177 0.0038  PM 9M05W7D
27 706.5  -  713.5 0.1782 0.0038  PM 4M49W7D
27 1720.0  -  1770.0 0.2307 0.001  PM 18M4G7D
27 1720.0  -  1770.0 0.1726 0.001  PM 18M4W7D
27 1715.0  -  1775.0 0.1884 0.001  PM 9M01W7D
27 673.0  -  688.0 0.2438 0.0151  PM 18M3G7D
27 673.0  -  688.0 0.1991 0.0151  PM 18M3W7D

Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the End-Users has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 7 dBi at 600 MHz, 700 MHz, 850 MHz, 1900 MHz, and 5 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, 24 and 27.

Class II permissive change.


EAS Grant - Application ARlojSFa2Q74KAs/4GdtRA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China 		  Date of Grant: 12/24/2018

Application Dated: 12/21/2018
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMONL668AM00
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: LTE module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 826.4  -  846.6 0.2254 0.0411  PM 4M31F9W
24E 1852.4  -  1907.6 0.2612 0.0105  PM 4M12F9W
27 1712.4  -  1752.6 0.2366 0.0551  PM 4M13F9W
24E 1860.0  -  1900.0 0.2143 0.0123  PM 18M5G7D
24E 1860.0  -  1900.0 0.1633 0.0123  PM 18M4W7D
24E 1857.5  -  1902.5 0.1718 0.0123  PM 13M5W7D
27 1720.0  -  1745.0 0.2028 0.0006  PM 18M4G7D
27 1720.0  -  1745.0 0.1545 0.0006  PM 18M3W7D
27 1715.0  -  1750.0 0.1618 0.0006  PM 9M09W7D
22H 829.0  -  844.0 0.1932 0.0018  PM 9M05G7D
22H 829.0  -  844.0 0.1483 0.0018  PM 8M97W7D
22H 824.7  -  848.3 0.156 0.0018  PM 1M10W7D
27 704.0  -  711.0 0.2259 0.002  PM 9M03G7D
27 704.0  -  711.0 0.1803 0.002  PM 9M05W7D
27 782.0  -  782.0 0.2109 0.0018  PM 8M99G7D
27 782.0  -  782.0 0.1607 0.0018  PM 9M01W7D
27 779.5  -  784.5 0.169 0.0018  PM 4M50W7D
27 709.0  -  711.0 0.2239 0.0038  PM 8M99G7D
27 709.0  -  711.0 0.177 0.0038  PM 9M05W7D
27 706.5  -  713.5 0.1782 0.0038  PM 4M49W7D
27 1720.0  -  1770.0 0.2307 0.001  PM 18M4G7D
27 1720.0  -  1770.0 0.1726 0.001  PM 18M4W7D
27 1715.0  -  1775.0 0.1884 0.001  PM 9M01W7D
27 673.0  -  688.0 0.2438 0.0151  PM 18M3G7D
27 673.0  -  688.0 0.1991 0.0151  PM 18M3W7D

Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the End-Users has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 7 dBi at 600 MHz, 700 MHz, 850 MHz, 1900 MHz, and 5 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, 24 and 27.

Class II permissive change.



TCB Grant - Application 3rNkiDhhSJmU6kxIiFkbOQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 10/15/2020

Application Dated: 10/13/2020
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMONL668AM00
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: LTE module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 826.4  -  846.6 0.2254 0.0411  PM 4M31F9W
24E 1852.4  -  1907.6 0.2612 0.0105  PM 4M12F9W
27 1712.4  -  1752.6 0.2366 0.0551  PM 4M13F9W
24E 1860.0  -  1900.0 0.2143 0.0123  PM 18M5G7D
24E 1860.0  -  1900.0 0.1633 0.0123  PM 18M4W7D
24E 1857.5  -  1902.5 0.1718 0.0123  PM 13M5W7D
27 1720.0  -  1745.0 0.2028 0.0006  PM 18M4G7D
27 1720.0  -  1745.0 0.1545 0.0006  PM 18M3W7D
27 1715.0  -  1750.0 0.1618 0.0006  PM 9M09W7D
22H 829.0  -  844.0 0.1932 0.0018  PM 9M05G7D
22H 829.0  -  844.0 0.1483 0.0018  PM 8M97W7D
22H 824.7  -  848.3 0.156 0.0018  PM 1M10W7D
27 704.0  -  711.0 0.2259 0.002  PM 9M03G7D
27 704.0  -  711.0 0.1803 0.002  PM 9M05W7D
27 782.0  -  782.0 0.2109 0.0018  PM 8M99G7D
27 782.0  -  782.0 0.1607 0.0018  PM 9M01W7D
27 779.5  -  784.5 0.169 0.0018  PM 4M50W7D
27 709.0  -  711.0 0.2239 0.0038  PM 8M99G7D
27 709.0  -  711.0 0.177 0.0038  PM 9M05W7D
27 706.5  -  713.5 0.1782 0.0038  PM 4M49W7D
27 1720.0  -  1770.0 0.2307 0.001  PM 18M4G7D
27 1720.0  -  1770.0 0.1726 0.001  PM 18M4W7D
27 1715.0  -  1775.0 0.1884 0.001  PM 9M01W7D
27 673.0  -  688.0 0.2438 0.0151  PM 18M3G7D
27 673.0  -  688.0 0.1991 0.0151  PM 18M3W7D

Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the End-Users has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 7 dBi at 600 MHz, 700 MHz, 850 MHz, 1900 MHz, and 5 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, 24 and 27.

Class II Permissive Change.


EAS Grant - Application 3rNkiDhhSJmU6kxIiFkbOQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China 		  Date of Grant: 10/15/2020

Application Dated: 10/13/2020
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMONL668AM00
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: LTE module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 826.4  -  846.6 0.2254 0.0411  PM 4M31F9W
24E 1852.4  -  1907.6 0.2612 0.0105  PM 4M12F9W
27 1712.4  -  1752.6 0.2366 0.0551  PM 4M13F9W
24E 1860.0  -  1900.0 0.2143 0.0123  PM 18M5G7D
24E 1860.0  -  1900.0 0.1633 0.0123  PM 18M4W7D
24E 1857.5  -  1902.5 0.1718 0.0123  PM 13M5W7D
27 1720.0  -  1745.0 0.2028 0.0006  PM 18M4G7D
27 1720.0  -  1745.0 0.1545 0.0006  PM 18M3W7D
27 1715.0  -  1750.0 0.1618 0.0006  PM 9M09W7D
22H 829.0  -  844.0 0.1932 0.0018  PM 9M05G7D
22H 829.0  -  844.0 0.1483 0.0018  PM 8M97W7D
22H 824.7  -  848.3 0.156 0.0018  PM 1M10W7D
27 704.0  -  711.0 0.2259 0.002  PM 9M03G7D
27 704.0  -  711.0 0.1803 0.002  PM 9M05W7D
27 782.0  -  782.0 0.2109 0.0018  PM 8M99G7D
27 782.0  -  782.0 0.1607 0.0018  PM 9M01W7D
27 779.5  -  784.5 0.169 0.0018  PM 4M50W7D
27 709.0  -  711.0 0.2239 0.0038  PM 8M99G7D
27 709.0  -  711.0 0.177 0.0038  PM 9M05W7D
27 706.5  -  713.5 0.1782 0.0038  PM 4M49W7D
27 1720.0  -  1770.0 0.2307 0.001  PM 18M4G7D
27 1720.0  -  1770.0 0.1726 0.001  PM 18M4W7D
27 1715.0  -  1775.0 0.1884 0.001  PM 9M01W7D
27 673.0  -  688.0 0.2438 0.0151  PM 18M3G7D
27 673.0  -  688.0 0.1991 0.0151  PM 18M3W7D

Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the End-Users has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 7 dBi at 600 MHz, 700 MHz, 850 MHz, 1900 MHz, and 5 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, 24 and 27.

Class II Permissive Change.



TCB Grant - Application 1fATH3bNy0Y8+OT49wWvkg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada 		Date of Grant: 11/29/2018

Application Dated: 11/28/2018
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMONL668AM00
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: LTE module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 826.4  -  846.6 0.2254 0.0411  PM 4M31F9W
24E 1852.4  -  1907.6 0.2612 0.0105  PM 4M12F9W
27 1712.4  -  1752.6 0.2366 0.0551  PM 4M13F9W
24E 1860.0  -  1900.0 0.2143 0.0123  PM 18M5G7D
24E 1860.0  -  1900.0 0.1633 0.0123  PM 18M4W7D
24E 1857.5  -  1902.5 0.1718 0.0123  PM 13M5W7D
27 1720.0  -  1745.0 0.2028 0.0006  PM 18M4G7D
27 1720.0  -  1745.0 0.1545 0.0006  PM 18M3W7D
27 1715.0  -  1750.0 0.1618 0.0006  PM 9M09W7D
22H 829.0  -  844.0 0.1932 0.0018  PM 9M05G7D
22H 829.0  -  844.0 0.1483 0.0018  PM 8M97W7D
22H 824.7  -  848.3 0.156 0.0018  PM 1M10W7D
27 704.0  -  711.0 0.2259 0.002  PM 9M03G7D
27 704.0  -  711.0 0.1803 0.002  PM 9M05W7D
27 782.0  -  782.0 0.2109 0.0018  PM 8M99G7D
27 782.0  -  782.0 0.1607 0.0018  PM 9M01W7D
27 779.5  -  784.5 0.169 0.0018  PM 4M50W7D
27 709.0  -  711.0 0.2239 0.0038  PM 8M99G7D
27 709.0  -  711.0 0.177 0.0038  PM 9M05W7D
27 706.5  -  713.5 0.1782 0.0038  PM 4M49W7D
27 1720.0  -  1770.0 0.2307 0.001  PM 18M4G7D
27 1720.0  -  1770.0 0.1726 0.001  PM 18M4W7D
27 1715.0  -  1775.0 0.1884 0.001  PM 9M01W7D
27 673.0  -  688.0 0.2438 0.0151  PM 18M3G7D
27 673.0  -  688.0 0.1991 0.0151  PM 18M3W7D

Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the End-Users has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 7 dBi at 600 MHz, 700 MHz, 850 MHz, 1900 MHz, and 5 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, 24 and 27.

EAS Grant - Application 1fATH3bNy0Y8+OT49wWvkg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China 		  Date of Grant: 11/29/2018

Application Dated: 11/28/2018
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMONL668AM00
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: LTE module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 826.4  -  846.6 0.2254 0.0411  PM 4M31F9W
24E 1852.4  -  1907.6 0.2612 0.0105  PM 4M12F9W
27 1712.4  -  1752.6 0.2366 0.0551  PM 4M13F9W
24E 1860.0  -  1900.0 0.2143 0.0123  PM 18M5G7D
24E 1860.0  -  1900.0 0.1633 0.0123  PM 18M4W7D
24E 1857.5  -  1902.5 0.1718 0.0123  PM 13M5W7D
27 1720.0  -  1745.0 0.2028 0.0006  PM 18M4G7D
27 1720.0  -  1745.0 0.1545 0.0006  PM 18M3W7D
27 1715.0  -  1750.0 0.1618 0.0006  PM 9M09W7D
22H 829.0  -  844.0 0.1932 0.0018  PM 9M05G7D
22H 829.0  -  844.0 0.1483 0.0018  PM 8M97W7D
22H 824.7  -  848.3 0.156 0.0018  PM 1M10W7D
27 704.0  -  711.0 0.2259 0.002  PM 9M03G7D
27 704.0  -  711.0 0.1803 0.002  PM 9M05W7D
27 782.0  -  782.0 0.2109 0.0018  PM 8M99G7D
27 782.0  -  782.0 0.1607 0.0018  PM 9M01W7D
27 779.5  -  784.5 0.169 0.0018  PM 4M50W7D
27 709.0  -  711.0 0.2239 0.0038  PM 8M99G7D
27 709.0  -  711.0 0.177 0.0038  PM 9M05W7D
27 706.5  -  713.5 0.1782 0.0038  PM 4M49W7D
27 1720.0  -  1770.0 0.2307 0.001  PM 18M4G7D
27 1720.0  -  1770.0 0.1726 0.001  PM 18M4W7D
27 1715.0  -  1775.0 0.1884 0.001  PM 9M01W7D
27 673.0  -  688.0 0.2438 0.0151  PM 18M3G7D
27 673.0  -  688.0 0.1991 0.0151  PM 18M3W7D

Single Modular Approval. Power output listed is conducted at the antenna terminal. This device is to be used only for mobile and fixed application, and must not be collocated or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter evaluation procedures as documented in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must ensure that the End-Users has no manual instructions to remove or install this module. For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed 7 dBi at 600 MHz, 700 MHz, 850 MHz, 1900 MHz, and 5 dBi at 1700 MHz as defined in 2.1091 for satisfying RF exposure compliance. Under no conditions may an antenna gain be used that would exceed the ERP and EIRP power limits as specified in Parts 22, 24 and 27.



Mail To: