FCC ID ZMOSC126W46

SC126-W

by Fibocom Wireless Inc.

Grantee Code: ZMO   Product Code: SC126W46
Latest application date: 2025-08-26

FCC ID Device Details

FCC IDZMOSC126W46
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeZMO
Product CodeSC126W46
Applicant BusinessFibocom Wireless Inc. 🇨🇳
Related Domains fibocom.com
Equipment ClassSC126-W
Test FirmShenzhen Morlab Communications Technology Co. Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2025-08-26
2402-2480 MHzOriginal Equipment2025-08-26
2402-2480 MHzOriginal Equipment2025-08-26

Exhibits

DocumentTypeAvailableFile
User_ManualUsers Manual2026-02-22PDF 3.9 MB
Internal_PhotoInternal Photos2026-02-22PDF 393.3 KB
External_PhotoExternal Photos2026-02-22PDF 841.7 KB
LabelID Label/Location Info2025-08-26PDF 294.4 KB
Test_Setuo_PhotoTest Setup Photos2026-02-22PDF 908 KB
Test_Setuo_PhotoTest Setup Photos2026-02-22PDF 756.4 KB
Test_Setuo_PhotoTest Setup Photos2026-02-22PDF 773.3 KB
Ant_specTest Report2025-08-26PDF 3.5 MB
SZ25050215W01_FibocomT_SC126-W_BLE_DTSTest Report2025-08-26PDF 4.1 MB
SZ25050215W02_FibocomT_SC126-W_BTclassic_DSSTest Report2025-08-26PDF 4.6 MB
SZ25050215W03_FibocomT_SC126-W_WiFi2.4G_DTSTest Report2025-08-26PDF 4.1 MB
SZ25050215W04_WiFi5G_U-NII_PART1Test Report2025-08-26PDF 4.1 MB
SZ25050215W04_WiFi5G_U-NII_PART2Test Report2025-08-26PDF 2.6 MB
Attestation_Statements_Part2.911(d)(5)Attestation Statements2025-08-26PDF 102 KB
Attestation_Statements_Part2.911(d)(7)Attestation Statements2025-08-26PDF 138.2 KB
Ad-HocCountry_Code_CoverLetterCover Letter(s)2025-08-26PDF 175.7 KB
Confidentiality_Request_LetterCover Letter(s)2025-08-26PDF 86.8 KB
DTS_UNII_DeclarationLetterCover Letter(s)2025-08-26PDF 66.7 KB
Modular_Approval_RequestCover Letter(s)2025-08-26PDF 101.6 KB
POACover Letter(s)2025-08-26PDF 70.9 KB
SZ25050215S01_FibocomT_SC126-W_FCC_RF ExposureRF Exposure Info2025-08-26PDF 334.7 KB
Block_Diagram Metadata onlyBlock DiagramPDF 176.2 KB
SCH Metadata onlySchematicsPDF 1 MB
Operational_Description Metadata onlyOperational DescriptionPDF 533.9 KB
Software_Security_Info Metadata onlySDR Software/Security Info.PDF 160.3 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 73.2 KB

Application Information

Application IDwe7IVJ2PghA+VMrGy5ulFg==
Final Action Date2025-08-26
Application PurposeOriginal Equipment
Applicant FRN0020891057
ModelSC126W46
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionSC126-W
Responsible PartyPatrick Ma, Certification Director, mapx@fibocom.com , +8675526733555
Test FirmMr. Su Feng, Shenzhen Morlab Communications Technology Co. Ltd., Zx.sun@morlab.cn , 86-755-36698566
TCB Emailbentje.holger@phoenix-testlab.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date02/22/2026
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Module approval is filing.Output power is maximum average conducted.This device supports IEEE 802.11 a/n/ac 20, 40 and 80 MHz channel bandwidths.This device has integrated DSS, DTS, NII and PCE transmitters certified under the same FCC ID.This module is designed for Mobile device application and only documented Antenna and permitted gain can be used in OEM installation. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must be provided with antenna installation instructions to satisfy RF exposure compliance. the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

Applications

Application IDDatePurpose
we7IVJ2PghA+VMrGy5ulFg==2025-08-26Original Equipment
uI+atz1ngBFZNRd8HE7ovA==2025-08-26Original Equipment
0EPKq9oAz0SZjd/d3gWmUA==2025-08-26Original Equipment

Equipment Authorization

FrequencyOutputGrant Notes
2402-2480 MHz0.0107900CC
2402-2480 MHz0.00447CC
2412-2462 MHz0.19454CC
5180-5240 MHz0.03034CC
5260-5320 MHz0.03112CC
5500-5700 MHz0.04083CC
5745-5825 MHz0.03664CC

Grants

TCB Grant - Application we7IVJ2PghA+VMrGy5ulFg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 08/26/2025

Application Dated: 08/25/2025
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Patrick Ma , Certification Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC126W46
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: SC126-W
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.03034  
CC 15E 5260.0  -  5320.0 0.03112  
CC 15E 5500.0  -  5700.0 0.04083  
CC 15E 5745.0  -  5825.0 0.03664  

Single Module approval is filing.
Output power is maximum average conducted.
This device supports IEEE 802.11 a/n/ac 20, 40 and 80 MHz channel bandwidths.
This device has integrated DSS, DTS, NII and PCE transmitters certified under the same FCC ID.
This module is designed for Mobile device application and only documented Antenna and permitted gain can be used in OEM installation. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must be provided with antenna installation instructions to satisfy RF exposure compliance. the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application uI+atz1ngBFZNRd8HE7ovA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 08/26/2025

Application Dated: 08/25/2025
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Patrick Ma , Certification Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC126W46
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Digital Transmission System
Notes: SC126-W
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.00447  
CC 15C 2412.0  -  2462.0 0.19454  

Single Module approval is filing.
Output power is maximum peak conducted.
This device supports IEEE 802.11 b/g/n20/n40 MHz channel bandwidths.
This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID.
This module is designed for Mobile device application and only documented Antenna and permitted gain can be used in OEM installation. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must be provided with antenna installation instructions to satisfy RF exposure compliance. the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 0EPKq9oAz0SZjd/d3gWmUA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 08/26/2025

Application Dated: 08/25/2025
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Patrick Ma , Certification Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC126W46
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: SC126-W
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01079  

Single Module approval is filing.
Output power is maximum peak conducted.
This device has integrated DSS, DTS and NII transmitters certified under the same FCC ID.
This module is designed for Mobile device application and only documented Antenna and permitted gain can be used in OEM installation. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). Modular Approval for mobile RF Exposure conditions. OEM integrators must be provided with antenna installation instructions to satisfy RF exposure compliance. the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

CC: This device is certified pursuant to two different Part 15 rules sections.