FCC ID ZMOSC138NA

LTE Module

by Fibocom Wireless Inc.

Grantee Code: ZMO   Product Code: SC138NA
Latest application date: 2026-03-07

FCC ID Device Details

FCC IDZMOSC138NA
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeZMO
Product CodeSC138NA
Applicant BusinessFibocom Wireless Inc. 🇨🇳
Related Domains fibocom.com linkswellinc.com
Equipment ClassLTE Module
Test FirmDongguan Nore Testing Center Co., Ltd.

Additional Linked Details

ManufacturerFibocom Wireless Inc.
Device NameFibocom
Model NumberSC138-NA
Certification Date2021-12-28
Manufacturer Website www.fibocom.com
Device Type5G Module
5G Certified❌

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2545-2645 MHzClass II permissive change or modification of presently authorized equipment2026-03-07
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2026-03-06
2402-2480 MHzClass II permissive change or modification of presently authorized equipment2026-03-06
5745-5825 MHzClass II permissive change or modification of presently authorized equipment2026-03-06
3560-3690 MHzClass II permissive change or modification of presently authorized equipment2026-03-06
3560-3690 MHzOriginal Equipment2021-12-28
2545-2645 MHzOriginal Equipment2021-12-28
5745-5825 MHzOriginal Equipment2021-12-27
2412-2462 MHzOriginal Equipment2021-12-27
2402-2480 MHzOriginal Equipment2021-12-27

Exhibits

DocumentTypeAvailableFile
13_SC138-NA Users Manual_Rev2Users Manual2026-03-07PDF 2.7 MB
13_SC138-NA Users Manual_Rev2Test Setup Photos2026-03-06PDF 2.7 MB
User ManualUsers Manual2021-12-28PDF 3.9 MB
Users ManualUsers Manual2021-12-27PDF 3.9 MB
09_SC138-NA Internal PhotosInternal Photos2026-03-07PDF 1.2 MB
Internal PhotosInternal Photos2021-12-28PDF 1.3 MB
08_SC138-NA External PhotosExternal Photos2026-03-07PDF 1.5 MB
External PhotosExternal Photos2021-12-28PDF 412.8 KB
Label & Label locationID Label/Location Info2021-12-28PDF 152.1 KB
label info & locationID Label/Location Info2021-12-28PDF 152.1 KB
label & location infoID Label/Location Info2021-12-27PDF 152.1 KB
15_SC138-NA Test Setup PhotosTest Setup Photos2026-03-07PDF 383.4 KB
Test Setup PhotosTest Setup Photos2021-12-28PDF 1.6 MB
DFS Test Setup PhotosTest Setup Photos2021-12-27PDF 417.7 KB
14_SC138-NA Test Report 3GTest Report2026-03-07PDF 1,018 KB
14_SC138-NA Test Report 4GTest Report2026-03-07PDF 696.1 KB
14_SC138-NA Test Report LTE Band 12 appendixTest Report2026-03-07PDF 447.4 KB
14_SC138-NA Test Report LTE Band 13 appendixTest Report2026-03-07PDF 344.4 KB
14_SC138-NA Test Report LTE Band 14 appendixTest Report2026-03-07PDF 343.6 KB
14_SC138-NA Test Report LTE Band 17 appendixTest Report2026-03-07PDF 374 KB
14_SC138-NA Test Report LTE Band 2 appendixTest Report2026-03-07PDF 520.8 KB
14_SC138-NA Test Report LTE Band 25 appendixTest Report2026-03-07PDF 523.9 KB
14_SC138-NA Test Report LTE Band 26 (814-824) appendixTest Report2026-03-07PDF 421.8 KB
14_SC138-NA Test Report LTE Band 26 (824-849) appendixTest Report2026-03-07PDF 486.8 KB
14_SC138-NA Test Report LTE Band 4 appendixTest Report2026-03-07PDF 522.1 KB
14_SC138-NA Test Report LTE Band 41 appendixTest Report2026-03-07PDF 449.7 KB
14_SC138-NA Test Report LTE Band 5 appendixTest Report2026-03-07PDF 447.8 KB
14_SC138-NA Test Report LTE Band 66 appendixTest Report2026-03-07PDF 523.4 KB
14_SC138-NA Test Report LTE Band 7 appendixTest Report2026-03-07PDF 449.1 KB
14_SC138-NA Test Report LTE Band 71 appendixTest Report2026-03-07PDF 449.9 KB
16_SC138-NA Antenna SpecificationTest Report2026-03-07PDF 3.9 MB
14_SC138-NA Test Report DSSTest Report2026-03-06PDF 890.1 KB
14_SC138-NA Test Report DTS 2.4G WiFiTest Report2026-03-06PDF 782.3 KB
14_SC138-NA Test Report DTS BLETest Report2026-03-06PDF 751 KB
14_SC138-NA Test Report NII 5G WIFITest Report2026-03-06PDF 940.8 KB
14_SC138-NA Test Report_Rev2Test Report2026-03-06PDF 1.4 MB
16_SC138-NA Antenna SpecificationTest Report2026-03-06PDF 5.3 MB
Test ReportTest Report2021-12-28PDF 1.1 MB
Test Report LTE Band48 part1Test Report2021-12-28PDF 4 MB
Test Report LTE Band48 part2Test Report2021-12-28PDF 4.9 MB
Test Report LTE Band48 part3Test Report2021-12-28PDF 3 MB
Test Report Part22 part1Test Report2021-12-28PDF 3.6 MB
Test Report Part22 part2Test Report2021-12-28PDF 4.9 MB
Test Report Part22 part3Test Report2021-12-28PDF 4.2 MB
Test Report Part24 part1Test Report2021-12-28PDF 5.1 MB
Test Report Part24 part2Test Report2021-12-28PDF 4.9 MB
Test Report Part24 part3Test Report2021-12-28PDF 5.3 MB
Test Report Part24 part4Test Report2021-12-28PDF 5.4 MB
Test Report Part24 part5Test Report2021-12-28PDF 3.1 MB
Test Report Part27 part1Test Report2021-12-28PDF 5.3 MB
Test Report Part27 part10Test Report2021-12-28PDF 4.8 MB
Test Report Part27 part11Test Report2021-12-28PDF 5.4 MB
Test Report Part27 part12Test Report2021-12-28PDF 2.4 MB
Test Report Part27 part2Test Report2021-12-28PDF 4.9 MB
Test Report Part27 part3Test Report2021-12-28PDF 5.2 MB
Test Report Part27 part4Test Report2021-12-28PDF 5 MB
Test Report Part27 part5Test Report2021-12-28PDF 4.9 MB
Test Report Part27 part6Test Report2021-12-28PDF 5.5 MB
Test Report Part27 part7Test Report2021-12-28PDF 5.1 MB
Test Report Part27 part8Test Report2021-12-28PDF 5.4 MB
Test Report Part27 part9Test Report2021-12-28PDF 5.4 MB
Test Report Part90RTest Report2021-12-28PDF 4.2 MB
Test Report Part90STest Report2021-12-28PDF 5.8 MB
5G Test Report part1Test Report2021-12-27PDF 5.4 MB
5G Test Report part2Test Report2021-12-27PDF 5.4 MB
5G Test Report part3Test Report2021-12-27PDF 4.9 MB
DFS Test ReportTest Report2021-12-27PDF 1.6 MB
Test ReportTest Report2021-12-27PDF 5.2 MB
Test Report 2.4G WIFI part1Test Report2021-12-27PDF 5 MB
Test Report 2.4G WIFI part2Test Report2021-12-27PDF 2 MB
Test Report BLETest Report2021-12-27PDF 4.5 MB
02_SC138-NA Covered Equipment Certification Attestation Letter1Attestation Statements2026-03-07PDF 92.4 KB
02_SC138-NA Covered Equipment Certification Attestation Letter2Attestation Statements2026-03-07PDF 186.2 KB
03_SC138-NA U.S. Agent Designation Attestation LetterAttestation Statements2026-03-07PDF 86.3 KB
04_SC138-NA Authorization-NTCCover Letter(s)2026-03-07PDF 97.5 KB
04_SC138-NA Authorization-Waltek Metadata onlyCover Letter(s)2026-03-07PDF 98 KB
05_SC138-NA Authorization-CTCover Letter(s)2026-03-07PDF 112.2 KB
06_SC138-NA Long-Confidential RequestCover Letter(s)2026-03-07PDF 124.4 KB
23A_SC138-NA Class II Permissive Change letter_Rev2Cover Letter(s)2026-03-07PDF 159.2 KB
04_SC138-NA Authorization-Waltek Metadata onlyCover Letter(s)2026-03-06PDF 112.2 KB
Confidentiality LetterCover Letter(s)2021-12-28PDF 22.2 KB
Confidentiality RequestCover Letter(s)2021-12-28PDF 22.2 KB
Mode DeclarationCover Letter(s)2021-12-28PDF 117.8 KB
Modular Approval RequestCover Letter(s)2021-12-28PDF 181.7 KB
POACover Letter(s)2021-12-28PDF 18.2 KB
Modular Approval LetterCover Letter(s)2021-12-27PDF 181.7 KB
Modular Approval Request LetterCover Letter(s)2021-12-27PDF 181.7 KB
17_SC138-NA RF Exp InfoRF Exposure Info2026-03-07PDF 346.2 KB
RF ExposureRF Exposure Info2021-12-28PDF 166.2 KB
11_SC138-NA Block Diagram Metadata onlyBlock DiagramPDF 971.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 971.6 KB
12_SC138-NA BOM Metadata onlySchematicsPDF 244.5 KB
12_SC138-NA PCB_P1 Metadata onlySchematicsPDF 3.6 MB
12_SC138-NA PCB_P2 Metadata onlySchematicsPDF 1.1 MB
12_SC138-NA Part Placement Metadata onlySchematicsPDF 1.8 MB
12_SC138-NA Schematics_P1 Metadata onlySchematicsPDF 4.8 MB
12_SC138-NA Schematics_P1 Metadata onlySchematicsPDF 3.4 MB
12_SC138-NA Schematics_P2 Metadata onlySchematicsPDF 3.4 MB
Schematics part1 Metadata onlySchematicsPDF 2 MB
Schematics part2 Metadata onlySchematicsPDF 3.8 MB
Schematics part3 Metadata onlySchematicsPDF 4.1 MB
Operation Description Metadata onlyOperational DescriptionPDF 968.6 KB
Software Security Description Metadata onlyOperational DescriptionPDF 372.7 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 244.5 KB
BOM list Metadata onlyParts List/Tune Up InfoPDF 244.5 KB
Tune up procedure Metadata onlyParts List/Tune Up InfoPDF 172 KB
Tune-up Procedure Metadata onlyParts List/Tune Up InfoPDF 172 KB

Application Information

Application IDbP7QuacW1calXeTr+QmcfA==
Final Action Date2026-03-07
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0020891057
ModelSC138NA
Frequency Range2545-2645 MHz
Equipment ClassPCB - PCS Licensed Transmitter
Device DescriptionLTE Module
Responsible PartyPatrick Ma, mapx@fibocom.com , +8675526733555
Non-Technical ContactAlex Liu, LINKS2,LLC, alex@linkswellinc.com , (574)612-2712
Test FirmJees Hong, Dongguan Nore Testing Center Co., Ltd., jees.hong@ntc-c.com , 86-769-22022444
TCB EmailTCBadmin@compliancetesting.com
TCB ScopeB1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
bP7QuacW1calXeTr+QmcfA==2026-03-07Class II permissive change or modification of presently authorized equipment
vPZsCLnBbzVtSf0fIVBwQw==2026-03-06Class II permissive change or modification of presently authorized equipment
oGGhJ3h6TGCZYHSwu+k7Fw==2026-03-06Class II permissive change or modification of presently authorized equipment
PtPm5vBw9vM0teTKmt2ruA==2026-03-06Class II permissive change or modification of presently authorized equipment
79ItDl2nWssnfEDN52yqmg==2026-03-06Class II permissive change or modification of presently authorized equipment
SLAn9tq70xIMtWZ3I6dnqA==2021-12-28Original Equipment
7YZiQc7AvzMCnvs9o4NdFg==2021-12-28Original Equipment
oKZdoO9PBbe931O4yGDD/w==2021-12-27Original Equipment
dauVRiYeNtWcZpYbnRlYeQ==2021-12-27Original Equipment
VAaMoxikXRvCUaPfTfTIUg==2021-12-27Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
665.5-695.5 MHz0.12972.5ppm4M52G7D27
673-688 MHz0.11532.5ppm18M0W7D27
673-688 MHz0.12562.5ppm18M0G7D27
701.5-713.5 MHz0.12972.5ppm4M52G7D27
701.5-713.5 MHz0.11672.5ppm4M50W7D27
704-711 MHz0.12822.5ppm9M02G7D27
704-711 MHz0.11122.5ppm9M04W7D27
706.5-713.5 MHz0.12682.5ppm4M52G7D27
706.5-713.5 MHz0.11322.5ppm4M51W7D27
709-711 MHz0.12362.5ppm8M97G7D27
709-711 MHz0.10842.5ppm8M95W7D27
779.5-784.5 MHz0.12742.5ppm4M51G7D27
779.5-784.5 MHz0.1132.5ppm4M50W7D27
782 MHz0.12332.5ppm8M96G7D27
782 MHz0.09752.5ppm8M96W7D27
790.5-795.5 MHz0.12532.5ppm4M53G7D9
790.5-795.5 MHz0.11172.5ppm4M50W7D9
793 MHz0.12082.5ppm8M96G7D9
793 MHz0.09662.5ppm8M95W7D9
816.5-821.5 MHz0.12652.5ppm4M52G7D9
816.5-821.5 MHz0.11172.5ppm4M50W7D9
819 MHz0.12252.5ppm8M96G7D9
819 MHz0.08072.5ppm8M96W7D9
826.5-846.5 MHz0.12652.5ppm4M51G7D22H
826.5-846.5 MHz0.11382.5ppm4M51W7D22H
831.5-841.5 MHz0.12592.5ppm13M4G7D22H
831.5-841.5 MHz0.11252.5ppm13M4W7D22H
1712.4-1752.6 MHz0.29042.5ppm4M14F9W27
1712.5-1777.5 MHz0.23122.5ppm4M51G7D27
1717.5-1747.5 MHz0.23562.5ppm13M4G7D27
1720-1740 MHz0.21382.5ppm17M9W7D27
1720-1740 MHz0.23442.5ppm17M9G7D27
1720-1740 MHz0.17622.5ppm17M9W7D27
1720-1770 MHz0.26552.5ppm17M9W7D27
1720-1770 MHz0.22752.5ppm18M0G7D27
1720-1770 MHz0.12272.5ppm17M9W7D27
1850.4-1907.6 MHz0.33422.5ppm4M14F9W24E
1852.5-1912.5 MHz0.23172.5ppm4M53G7D24E
1852.5-1912.5 MHz0.21182.5ppm4M51W7D24E
1860-1900 MHz0.24152.5ppm17M9G7D24E
1860-1900 MHz0.22442.5ppm17M9W7D24E

Grants

TCB Grant - Application vPZsCLnBbzVtSf0fIVBwQw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Compliance Testing, LLC
1724 S. Nevada Way
Mesa, AZ 85204
Date of Grant: 03/06/2026

Application Dated: 03/06/2026
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Patrick Ma , Certification Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC138NA
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Digital Transmission System
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0044  
CC 15C 2412.0  -  2462.0 0.0558  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) (as described in this filing) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz bandwidth modes. This is a C2PC application to change RF antennas as described in the filing.

CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application VAaMoxikXRvCUaPfTfTIUg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/27/2021

Application Dated: 12/27/2021
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC138NA
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0119  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) (as described in this filing) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.

EAS Grant - Application VAaMoxikXRvCUaPfTfTIUg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
  Date of Grant: 12/27/2021

Application Dated: 12/27/2021
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC138NA
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0119  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) (as described in this filing) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.



TCB Grant - Application SLAn9tq70xIMtWZ3I6dnqA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/28/2021

Application Dated: 12/28/2021
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC138NA
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Citizens Band End User Devices
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
96 3560.0  -  3690.0 0.241 2.5  PM 18M0G7D
96 3560.0  -  3690.0 0.2356 2.5  PM 17M9W7D
96 3560.0  -  3690.0 0.1563 2.5  PM 17M9W7D

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) (as described in this filing) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Band 48.

EAS Grant - Application SLAn9tq70xIMtWZ3I6dnqA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
  Date of Grant: 12/28/2021

Application Dated: 12/28/2021
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC138NA
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Citizens Band End User Devices
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
96 3560.0  -  3690.0 0.241 2.5  PM 18M0G7D
96 3560.0  -  3690.0 0.2356 2.5  PM 17M9W7D
96 3560.0  -  3690.0 0.1563 2.5  PM 17M9W7D

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) (as described in this filing) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Band 48.



TCB Grant - Application PtPm5vBw9vM0teTKmt2ruA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Compliance Testing, LLC
1724 S. Nevada Way
Mesa, AZ 85204
Date of Grant: 03/06/2026

Application Dated: 03/06/2026
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Patrick Ma , Certification Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC138NA
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0946  
CC 15E 5260.0  -  5320.0 0.0906  
CC 15E 5500.0  -  5700.0 0.0877  
CC 15E 5745.0  -  5825.0 0.0796  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) (as described in this filing) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20, 40 and 80 MHz bandwidth modes. This is a C2PC application to change RF antennas as described in the filing.

CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application oKZdoO9PBbe931O4yGDD/w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/27/2021

Application Dated: 12/27/2021
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC138NA
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5240.0 0.0946  
15E 5260.0  -  5320.0 0.0906  
15E 5500.0  -  5700.0 0.0877  
15E 5745.0  -  5825.0 0.0796  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) (as described in this filing) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20, 40 and 80 MHz bandwidth modes.

EAS Grant - Application oKZdoO9PBbe931O4yGDD/w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
  Date of Grant: 12/27/2021

Application Dated: 12/27/2021
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC138NA
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15E 5180.0  -  5240.0 0.0946  
15E 5260.0  -  5320.0 0.0906  
15E 5500.0  -  5700.0 0.0877  
15E 5745.0  -  5825.0 0.0796  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) (as described in this filing) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20, 40 and 80 MHz bandwidth modes.



TCB Grant - Application oGGhJ3h6TGCZYHSwu+k7Fw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Compliance Testing, LLC
1724 S. Nevada Way
Mesa, AZ 85204
Date of Grant: 03/06/2026

Application Dated: 03/06/2026
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Patrick Ma , Certification Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC138NA
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0119  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) (as described in this filing) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This is a C2PC application to change RF antennas as described in the filing.

CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application dauVRiYeNtWcZpYbnRlYeQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/27/2021

Application Dated: 12/27/2021
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC138NA
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Digital Transmission System
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0044  
15C 2412.0  -  2462.0 0.0558  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) (as described in this filing) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz bandwidth modes.

EAS Grant - Application dauVRiYeNtWcZpYbnRlYeQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
  Date of Grant: 12/27/2021

Application Dated: 12/27/2021
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC138NA
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Digital Transmission System
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0044  
15C 2412.0  -  2462.0 0.0558  

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) (as described in this filing) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz bandwidth modes.



TCB Grant - Application bP7QuacW1calXeTr+QmcfA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Compliance Testing, LLC
1724 S. Nevada Way
Mesa, AZ 85204
Date of Grant: 03/07/2026

Application Dated: 03/06/2026
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Patrick Ma , Certification Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC138NA
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.1754 2.5  PM 4M14F9W
22H 826.5  -  846.5 0.1245 2.5  PM 4M51G7D
22H 826.5  -  846.5 0.1112 2.5  PM 4M51W7D
22H 829.0  -  844.0 0.1227 2.5  PM 8M98G7D
22H 829.0  -  844.0 0.1074 2.5  PM 8M98W7D
22H 826.5  -  826.5 0.1265 2.5  PM 4M51G7D
22H 826.5  -  826.5 0.1138 2.5  PM 4M51W7D
22H 831.5  -  841.5 0.1259 2.5  PM 13M4G7D
22H 831.5  -  841.5 0.1125 2.5  PM 13M4W7D
24E 1850.4  -  1907.6 0.3342 2.5  PM 4M14F9W
24E 1860.0  -  1900.0 0.2415 2.5  PM 17M9G7D
24E 1860.0  -  1900.0 0.2244 2.5  PM 17M9W7D
24E 1852.5  -  1912.5 0.2317 2.5  PM 4M53G7D
24E 1852.5  -  1912.5 0.2118 2.5  PM 4M51W7D
24E 1860.0  -  1905.0 0.2249 2.5  PM 17M9G7D
24E 1860.0  -  1905.0 0.2089 2.5  PM 18M0W7D
27 1712.4  -  1752.6 0.2904 2.5  PM 4M14F9W
27 1717.5  -  1747.5 0.2356 2.5  PM 13M4G7D
27 1720.0  -  1740.0 0.2138 2.5  PM 17M9W7D
27 1720.0  -  1740.0 0.2344 2.5  PM 17M9G7D
27 1720.0  -  1740.0 0.1762 2.5  PM 17M9W7D
27 2502.5  -  2567.5 0.2218 2.5  PM 4M51G7D
27 2502.5  -  2567.5 0.2014 2.5  PM 4M51W7D
27 2510.0  -  2560.0 0.2138 2.5  PM 17M9G7D
27 2510.0  -  2560.0 0.1633 2.5  PM 17M9W7D
27 2545.0  -  2645.0 0.2679 2.5  Hz 17M9G7D
27 2545.0  -  2645.0 0.2265 2.5  PM 17M9W7D
27 1712.5  -  1777.5 0.2312 2.5  PM 4M51G7D
27 1720.0  -  1770.0 0.2655 2.5  PM 17M9W7D
27 1720.0  -  1770.0 0.2275 2.5  PM 18M0G7D
27 1720.0  -  1770.0 0.1227 2.5  PM 17M9W7D
27 701.5  -  713.5 0.1297 2.5  PM 4M52G7D
27 701.5  -  713.5 0.1167 2.5  PM 4M50W7D
27 704.0  -  711.0 0.1282 2.5  PM 9M02G7D
27 704.0  -  711.0 0.1112 2.5  PM 9M04W7D
27 779.5  -  784.5 0.1274 2.5  PM 4M51G7D
27 779.5  -  784.5 0.113 2.5  PM 4M50W7D
27 782.0  -  782.0 0.1233 2.5  PM 8M96G7D
27 782.0  -  782.0 0.0975 2.5  PM 8M96W7D
27 706.5  -  713.5 0.1268 2.5  PM 4M52G7D
27 706.5  -  713.5 0.1132 2.5  PM 4M51W7D
27 709.0  -  711.0 0.1236 2.5  PM 8M97G7D
27 709.0  -  711.0 0.1084 2.5  PM 8M95W7D
27 665.5  -  695.5 0.1297 2.5  PM 4M52G7D
27 673.0  -  688.0 0.1153 2.5  PM 18M0W7D
27 673.0  -  688.0 0.1256 2.5  PM 18M0G7D
90 816.5  -  821.5 0.1265 2.5  PM 4M52G7D
90 816.5  -  821.5 0.1117 2.5  PM 4M50W7D
90 819.0  -  819.0 0.1225 2.5  PM 8M96G7D
90 819.0  -  819.0 0.0807 2.5  PM 8M96W7D
90 790.5  -  795.5 0.1253 2.5  PM 4M53G7D
90 790.5  -  795.5 0.1117 2.5  PM 4M50W7D
90 793.0  -  793.0 0.1208 2.5  PM 8M96G7D
90 793.0  -  793.0 0.0966 2.5  PM 8M95W7D

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) (as described in this filing) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4, 25 and 66; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 7 and 71; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14 and 17; LTE of 1.4, 3, 5, 10 and 15 MHz bandwidth modes for FDD LTE Band 26; and LTE of 5, 10, 15 and 20 MHz bandwidth modes for TDD LTE Band 41. This is a C2PC application to change RF antennas as described in the filing.

TCB Grant - Application 7YZiQc7AvzMCnvs9o4NdFg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 12/28/2021

Application Dated: 12/28/2021
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC138NA
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.1754 2.5  PM 4M14F9W
22H 826.5  -  846.5 0.1245 2.5  PM 4M51G7D
22H 826.5  -  846.5 0.1112 2.5  PM 4M51W7D
22H 829.0  -  844.0 0.1227 2.5  PM 8M98G7D
22H 829.0  -  844.0 0.1074 2.5  PM 8M98W7D
22H 826.5  -  846.5 0.1265 2.5  PM 4M51G7D
22H 826.5  -  846.5 0.1138 2.5  PM 4M51W7D
22H 831.5  -  841.5 0.1259 2.5  PM 13M4G7D
22H 831.5  -  841.5 0.1125 2.5  PM 13M4W7D
24E 1850.4  -  1907.6 0.3342 2.5  PM 4M14F9W
24E 1860.0  -  1900.0 0.2415 2.5  PM 17M9G7D
24E 1860.0  -  1900.0 0.2244 2.5  PM 17M9W7D
24E 1852.5  -  1912.5 0.2317 2.5  PM 4M53G7D
24E 1852.5  -  1912.5 0.2118 2.5  PM 4M51W7D
24E 1860.0  -  1905.0 0.2249 2.5  PM 17M9G7D
24E 1860.0  -  1905.0 0.2089 2.5  PM 18M0W7D
27 1712.4  -  1752.6 0.2904 2.5  PM 4M14F9W
27 1717.5  -  1747.5 0.2356 2.5  PM 13M4G7D
27 1720.0  -  1740.0 0.2138 2.5  PM 17M9W7D
27 1720.0  -  1740.0 0.2344 2.5  PM 17M9G7D
27 1720.0  -  1740.0 0.1762 2.5  PM 17M9W7D
27 2502.5  -  2567.5 0.2218 2.5  PM 4M51G7D
27 2502.5  -  2567.5 0.2014 2.5  PM 4M51W7D
27 2510.0  -  2560.0 0.2138 2.5  PM 17M9G7D
27 2510.0  -  2560.0 0.1633 2.5  PM 17M9W7D
27 2545.0  -  2645.0 0.2679 2.5  PM 17M9G7D
27 2545.0  -  2645.0 0.2265 2.5  PM 17M9W7D
27 1712.5  -  1777.5 0.2312 2.5  PM 4M51G7D
27 1720.0  -  1770.0 0.2655 2.5  PM 17M9W7D
27 1720.0  -  1770.0 0.2275 2.5  PM 18M0G7D
27 1720.0  -  1770.0 0.1227 2.5  PM 17M9W7D
27 701.5  -  713.5 0.1297 2.5  PM 4M52G7D
27 701.5  -  713.5 0.1167 2.5  PM 4M50W7D
27 704.0  -  711.0 0.1282 2.5  PM 9M02G7D
27 704.0  -  711.0 0.1112 2.5  PM 9M04W7D
27 779.5  -  784.5 0.1274 2.5  PM 4M51G7D
27 779.5  -  784.5 0.113 2.5  PM 4M50W7D
27 782.0  -  782.0 0.1233 2.5  PM 8M96G7D
27 782.0  -  782.0 0.0975 2.5  PM 8M96W7D
27 706.5  -  713.5 0.1268 2.5  PM 4M52G7D
27 706.5  -  713.5 0.1132 2.5  PM 4M51W7D
27 709.0  -  711.0 0.1236 2.5  PM 8M97G7D
27 709.0  -  711.0 0.1084 2.5  PM 8M95W7D
27 665.5  -  695.5 0.1297 2.5  PM 4M52G7D
27 673.0  -  688.0 0.1153 2.5  PM 18M0W7D
27 673.0  -  688.0 0.1256 2.5  PM 18M0G7D
90 816.5  -  821.5 0.1265 2.5  PM 4M52G7D
90 816.5  -  821.5 0.1117 2.5  PM 4M50W7D
90 819.0  -  819.0 0.1225 2.5  PM 8M96G7D
90 819.0  -  819.0 0.0807 2.5  PM 8M96W7D
90 790.5  -  795.5 0.1253 2.5  PM 4M53G7D
90 790.5  -  795.5 0.1117 2.5  PM 4M50W7D
90 793.0  -  793.0 0.1208 2.5  PM 8M96G7D
90 793.0  -  793.0 0.0966 2.5  PM 8M95W7D

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) (as described in this filing) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4, 25 and 66; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 7 and 71; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14 and 17; LTE of 1.4, 3, 5, 10 and 15 MHz bandwidth modes for FDD LTE Band 26; and LTE of 5, 10, 15 and 20 MHz bandwidth modes for TDD LTE Band 41.

EAS Grant - Application 7YZiQc7AvzMCnvs9o4NdFg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
  Date of Grant: 12/28/2021

Application Dated: 12/28/2021
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC138NA
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 826.4  -  846.6 0.1754 2.5  PM 4M14F9W
22H 826.5  -  846.5 0.1245 2.5  PM 4M51G7D
22H 826.5  -  846.5 0.1112 2.5  PM 4M51W7D
22H 829.0  -  844.0 0.1227 2.5  PM 8M98G7D
22H 829.0  -  844.0 0.1074 2.5  PM 8M98W7D
22H 826.5  -  846.5 0.1265 2.5  PM 4M51G7D
22H 826.5  -  846.5 0.1138 2.5  PM 4M51W7D
22H 831.5  -  841.5 0.1259 2.5  PM 13M4G7D
22H 831.5  -  841.5 0.1125 2.5  PM 13M4W7D
24E 1850.4  -  1907.6 0.3342 2.5  PM 4M14F9W
24E 1860.0  -  1900.0 0.2415 2.5  PM 17M9G7D
24E 1860.0  -  1900.0 0.2244 2.5  PM 17M9W7D
24E 1852.5  -  1912.5 0.2317 2.5  PM 4M53G7D
24E 1852.5  -  1912.5 0.2118 2.5  PM 4M51W7D
24E 1860.0  -  1905.0 0.2249 2.5  PM 17M9G7D
24E 1860.0  -  1905.0 0.2089 2.5  PM 18M0W7D
27 1712.4  -  1752.6 0.2904 2.5  PM 4M14F9W
27 1717.5  -  1747.5 0.2356 2.5  PM 13M4G7D
27 1720.0  -  1740.0 0.2138 2.5  PM 17M9W7D
27 1720.0  -  1740.0 0.2344 2.5  PM 17M9G7D
27 1720.0  -  1740.0 0.1762 2.5  PM 17M9W7D
27 2502.5  -  2567.5 0.2218 2.5  PM 4M51G7D
27 2502.5  -  2567.5 0.2014 2.5  PM 4M51W7D
27 2510.0  -  2560.0 0.2138 2.5  PM 17M9G7D
27 2510.0  -  2560.0 0.1633 2.5  PM 17M9W7D
27 2545.0  -  2645.0 0.2679 2.5  PM 17M9G7D
27 2545.0  -  2645.0 0.2265 2.5  PM 17M9W7D
27 1712.5  -  1777.5 0.2312 2.5  PM 4M51G7D
27 1720.0  -  1770.0 0.2655 2.5  PM 17M9W7D
27 1720.0  -  1770.0 0.2275 2.5  PM 18M0G7D
27 1720.0  -  1770.0 0.1227 2.5  PM 17M9W7D
27 701.5  -  713.5 0.1297 2.5  PM 4M52G7D
27 701.5  -  713.5 0.1167 2.5  PM 4M50W7D
27 704.0  -  711.0 0.1282 2.5  PM 9M02G7D
27 704.0  -  711.0 0.1112 2.5  PM 9M04W7D
27 779.5  -  784.5 0.1274 2.5  PM 4M51G7D
27 779.5  -  784.5 0.113 2.5  PM 4M50W7D
27 782.0  -  782.0 0.1233 2.5  PM 8M96G7D
27 782.0  -  782.0 0.0975 2.5  PM 8M96W7D
27 706.5  -  713.5 0.1268 2.5  PM 4M52G7D
27 706.5  -  713.5 0.1132 2.5  PM 4M51W7D
27 709.0  -  711.0 0.1236 2.5  PM 8M97G7D
27 709.0  -  711.0 0.1084 2.5  PM 8M95W7D
27 665.5  -  695.5 0.1297 2.5  PM 4M52G7D
27 673.0  -  688.0 0.1153 2.5  PM 18M0W7D
27 673.0  -  688.0 0.1256 2.5  PM 18M0G7D
90 816.5  -  821.5 0.1265 2.5  PM 4M52G7D
90 816.5  -  821.5 0.1117 2.5  PM 4M50W7D
90 819.0  -  819.0 0.1225 2.5  PM 8M96G7D
90 819.0  -  819.0 0.0807 2.5  PM 8M96W7D
90 790.5  -  795.5 0.1253 2.5  PM 4M53G7D
90 790.5  -  795.5 0.1117 2.5  PM 4M50W7D
90 793.0  -  793.0 0.1208 2.5  PM 8M96G7D
90 793.0  -  793.0 0.0966 2.5  PM 8M95W7D

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) (as described in this filing) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 1.4, 3, 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 2, 4, 25 and 66; LTE of 5, 10, 15 and 20 MHz bandwidth modes for FDD LTE Bands 7 and 71; LTE of 1.4, 3, 5 and 10 MHz bandwidth modes for FDD LTE Bands 5 and 12; LTE of 5 and 10 MHz bandwidth modes for FDD LTE Bands 13, 14 and 17; LTE of 1.4, 3, 5, 10 and 15 MHz bandwidth modes for FDD LTE Band 26; and LTE of 5, 10, 15 and 20 MHz bandwidth modes for TDD LTE Band 41.



TCB Grant - Application 79ItDl2nWssnfEDN52yqmg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Compliance Testing, LLC
1724 S. Nevada Way
Mesa, AZ 85204
Date of Grant: 03/06/2026

Application Dated: 03/06/2026
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Patrick Ma , Certification Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC138NA
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Citizens Band End User Devices
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
96 3560.0  -  3690.0 0.241 2.5  PM 18M0G7D
96 3560.0  -  3690.0 0.2356 2.5  PM 17M9W7D
96 3560.0  -  3690.0 0.1563 2.5  PM 17M9W7D

Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. The module antenna(s) (as described in this filing) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. Approved for OEM integration only. The grantee must provide OEM integrators, or end-users if marketed directly to end-users, with installation and operating instructions for satisfying FCC multi-transmitter product guidelines. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports LTE of 5, 10, 15, and 20 MHz bandwidth modes for TDD LTE Band 48. This is a C2PC application to change RF antennas as described in the filing.