1. FCC ID
  2. ZMO
  3. ZMOSC806AM

FCC ID ZMOSC806AM

LTE Module

by Fibocom Wireless Inc.

Grantee Code: ZMO   Product Code: SC806AM
Latest application date: 2018-09-10

FCC ID Device Details

FCC IDZMOSC806AM
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeZMO
Product CodeSC806AM
Applicant BusinessFibocom Wireless Inc. 🇨🇳
Related Domains fibocom.com sgs.com
Equipment ClassLTE Module
Test FirmSGS-CSTC Standards Technical Services Co., Ltd

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2018-09-10
699.7-715.3 MHzOriginal Equipment2018-09-10
5180-5240 MHzOriginal Equipment2018-09-10
2402-2480 MHzOriginal Equipment2018-09-10

Exhibits

DocumentTypeAvailableFile
Users Manual Metadata onlyUsers Manual2018-09-10PDF 2.2 MB
Users Manual_revised0910Users Manual2018-09-10PDF 2.2 MB
Internal PhotosInternal Photos2018-09-10PDF 198.2 KB
External PhotosExternal Photos2018-09-10PDF 175.2 KB
ID Label/Location InfoID Label/Location Info2018-09-10PDF 461.4 KB
Test Setup PhotosTest Setup Photos2018-09-10PDF 285.6 KB
Appendix B.1_WCDMA Band 5_2_4Test Report2018-09-10PDF 2.7 MB
Appendix B.2_LTE Band 2Test Report2018-09-10PDF 4 MB
Appendix B.3_LTE Band 4Test Report2018-09-10PDF 4 MB
Appendix B.4_LTE Band 5Test Report2018-09-10PDF 3 MB
Appendix B.5_LTE Band 12Test Report2018-09-10PDF 3 MB
Appendix B.6_LTE Band 13Test Report2018-09-10PDF 1.7 MB
Appendix B.7_LTE Band 17Test Report2018-09-10PDF 2.1 MB
Test ReportTest Report2018-09-10PDF 987.5 KB
Test Report_BLETest Report2018-09-10PDF 2.3 MB
Test Report_DSSTest Report2018-09-10PDF 4.8 MB
Test Report_NII_Part 1Test Report2018-09-10PDF 4.6 MB
Test Report_NII_Part 2Test Report2018-09-10PDF 2.8 MB
Test Report_WLANTest Report2018-09-10PDF 3.5 MB
ConfidentialityCover Letter(s)2018-09-10PDF 78.4 KB
Declaration of Conformity FCC subpart 15BCover Letter(s)2018-09-10PDF 83 KB
Declaration of authorizationCover Letter(s)2018-09-10PDF 14.6 KB
FCC Modular Approval RequestCover Letter(s)2018-09-10PDF 134.2 KB
channel declarationCover Letter(s)2018-09-10PDF 106.4 KB
confidentialityCover Letter(s)2018-09-10PDF 78.4 KB
MPE Metadata onlyRF Exposure Info2018-09-10PDF 316.2 KB
MPE_revised0910RF Exposure Info2018-09-10PDF 316.3 KB
Block Diagram Metadata onlyBlock DiagramPDF 199.1 KB
Schematics Metadata onlySchematicsPDF 2.1 MB
NII Software Security Info Metadata onlyOperational DescriptionPDF 191.7 KB
Operational Description Metadata onlyOperational DescriptionPDF 294.7 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 89.1 KB
Parts list (BOM) Metadata onlyParts List/Tune Up InfoPDF 89.1 KB
Tune up procedure Metadata onlyParts List/Tune Up InfoPDF 300.2 KB
Tune-Up Procedure Metadata onlyParts List/Tune Up InfoPDF 300.2 KB

Application Information

Application IDqo7XQFcfH6r/tH0V/g9Biw==
Final Action Date2018-09-10
Application PurposeOriginal Equipment
Applicant FRN0020891057
ModelSC806AM
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionLTE Module
Responsible PartyLucy Liu, Certification Manager, lucy.liu@fibocom.com , +8675526733555
AgentJim Jim Jim, SGS-CSTC Standards Technical Services Ltd, jim-hk.huang@sgs.com , 0755-25328525
Technical ContactJim huang, SGS-CSTC Standards Technical Services Ltd, jim-hk.huang@sgs.com , 0755-25328525
Non-Technical ContactJim huang, SGS-CSTC Standards Technical Services Ltd, jim-hk.huang@sgs.com , 0755-25328525
Test FirmDerek Yang, SGS-CSTC Standards Technical Services Co., Ltd, Derek-WZ.yang@sgs.com , +86 0135 6484 8721
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsModular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
qo7XQFcfH6r/tH0V/g9Biw==2018-09-10Original Equipment
mMwbwLJ4IQlDroZHIzkKjg==2018-09-10Original Equipment
QtmCqr1oLtIb/KiFN8eQ5w==2018-09-10Original Equipment
LEw4QGRr5jKmO+fmP3U5OQ==2018-09-10Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
699.7-715.3 MHz0.2210.00812ppm8M93G7D27
699.7-715.3 MHz0.1910.00812ppm8M93W7D27
706.5-713.5 MHz0.2320.00085ppm8M91G7D27
706.5-713.5 MHz0.1710.00085ppm8M91W7D27
779.5-784.5 MHz0.2250.01976ppm8M89G7D27
779.5-784.5 MHz0.1920.01976ppm8M89W7D27
824.7-848.3 MHz0.2080.0079ppm8M93G7D22H
824.7-848.3 MHz0.1770.0079ppm8M93W7D22H
826.4-846.6 MHz0.2160.00398ppm4M75F9W22H
1710.7-1754.3 MHz0.2260.00761ppm8M95G7D27
1710.7-1754.3 MHz0.1970.00761ppm4M51W7D27
1710.7-1754.3 MHz0.2190.00761ppm17M9G7D27
1710.7-1754.3 MHz0.1810.00761ppm17M9W7D27
1712.4-1752.6 MHz0.1910.00933ppm4M83F9W27
1850.7-1909.3 MHz0.2690.00714ppm17M9G7D24E
1850.7-1909.3 MHz0.2330.00714ppm17M9W7D24E
2402-2480 MHz0.001515CCC
2402-2480 MHz0.014000015CCC
2412-2462 MHz0.13115CCC
5180-5240 MHz0.03915ECC
5260-5320 MHz0.03915ECC, ND
5500-5700 MHz0.03815ECC, ND
5745-5825 MHz0.02815ECC

Grants

TCB Grant - Application QtmCqr1oLtIb/KiFN8eQ5w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands 		Date of Grant: 09/10/2018

Application Dated: 09/06/2018
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC806AM
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.039  
CC ND 15E 5260.0  -  5320.0 0.039  
CC ND 15E 5500.0  -  5700.0 0.038  
CC 15E 5745.0  -  5825.0 0.028  

Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports ( 20 / 40 MHz) Bandwidths.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application QtmCqr1oLtIb/KiFN8eQ5w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China 		  Date of Grant: 09/10/2018

Application Dated: 09/06/2018
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC806AM
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.039  
CC ND 15E 5260.0  -  5320.0 0.039  
CC ND 15E 5500.0  -  5700.0 0.038  
CC 15E 5745.0  -  5825.0 0.028  

Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports ( 20 / 40 MHz) Bandwidths.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application qo7XQFcfH6r/tH0V/g9Biw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands 		Date of Grant: 09/10/2018

Application Dated: 09/06/2018
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC806AM
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.014  

Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application qo7XQFcfH6r/tH0V/g9Biw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China 		  Date of Grant: 09/10/2018

Application Dated: 09/06/2018
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC806AM
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.014  

Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application mMwbwLJ4IQlDroZHIzkKjg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands 		Date of Grant: 09/10/2018

Application Dated: 09/06/2018
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC806AM
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24E 1852.4  -  1907.6 0.219 0.00444  PM 4M81F9W
27 1712.4  -  1752.6 0.191 0.00933  PM 4M83F9W
22H 826.4  -  846.6 0.216 0.00398  PM 4M75F9W
24E 1850.7  -  1909.3 0.269 0.00714  PM 17M9G7D
24E 1850.7  -  1909.3 0.233 0.00714  PM 17M9W7D
27 1710.7  -  1754.3 0.226 0.00761  PM 8M95G7D
27 1710.7  -  1754.3 0.197 0.00761  PM 4M51W7D
27 1710.7  -  1754.3 0.219 0.00761  PM 17M9G7D
27 1710.7  -  1754.3 0.181 0.00761  PM 17M9W7D
22H 824.7  -  848.3 0.208 0.0079  PM 8M93G7D
22H 824.7  -  848.3 0.177 0.0079  PM 8M93W7D
27 699.7  -  715.3 0.221 0.00812  PM 8M93G7D
27 699.7  -  715.3 0.191 0.00812  PM 8M93W7D
27 779.5  -  784.5 0.225 0.01976  PM 8M89G7D
27 779.5  -  784.5 0.192 0.01976  PM 8M89W7D
27 706.5  -  713.5 0.232 0.00085  PM 8M91G7D
27 706.5  -  713.5 0.171 0.00085  PM 8M91W7D

Modular Approval. Power output listed is conducted. output power is ERP for frequency below 1 GHz & EIRP for frequency above 1 GHz. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

The maximum antenna gain including cable loss in a mobile-only exposure condition must not exceed:

WCDMA Band II / IV / V = 8.05 / 5.5 / 12.1 dBi respectively.

LTE Band II / IV / V / XII / XIII / XVII = 8.55 / 6.0 / 12.6 / 12.6 / 12.6 / 12.6 dBi respectively.


EAS Grant - Application mMwbwLJ4IQlDroZHIzkKjg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China 		  Date of Grant: 09/10/2018

Application Dated: 09/06/2018
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC806AM
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: PCS Licensed Transmitter
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
24E 1852.4  -  1907.6 0.219 0.00444  PM 4M81F9W
27 1712.4  -  1752.6 0.191 0.00933  PM 4M83F9W
22H 826.4  -  846.6 0.216 0.00398  PM 4M75F9W
24E 1850.7  -  1909.3 0.269 0.00714  PM 17M9G7D
24E 1850.7  -  1909.3 0.233 0.00714  PM 17M9W7D
27 1710.7  -  1754.3 0.226 0.00761  PM 8M95G7D
27 1710.7  -  1754.3 0.197 0.00761  PM 4M51W7D
27 1710.7  -  1754.3 0.219 0.00761  PM 17M9G7D
27 1710.7  -  1754.3 0.181 0.00761  PM 17M9W7D
22H 824.7  -  848.3 0.208 0.0079  PM 8M93G7D
22H 824.7  -  848.3 0.177 0.0079  PM 8M93W7D
27 699.7  -  715.3 0.221 0.00812  PM 8M93G7D
27 699.7  -  715.3 0.191 0.00812  PM 8M93W7D
27 779.5  -  784.5 0.225 0.01976  PM 8M89G7D
27 779.5  -  784.5 0.192 0.01976  PM 8M89W7D
27 706.5  -  713.5 0.232 0.00085  PM 8M91G7D
27 706.5  -  713.5 0.171 0.00085  PM 8M91W7D

Modular Approval. Power output listed is conducted. output power is ERP for frequency below 1 GHz & EIRP for frequency above 1 GHz. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

The maximum antenna gain including cable loss in a mobile-only exposure condition must not exceed:

WCDMA Band II / IV / V = 8.05 / 5.5 / 12.1 dBi respectively.

LTE Band II / IV / V / XII / XIII / XVII = 8.55 / 6.0 / 12.6 / 12.6 / 12.6 / 12.6 dBi respectively.



TCB Grant - Application LEw4QGRr5jKmO+fmP3U5OQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands 		Date of Grant: 09/10/2018

Application Dated: 09/06/2018
Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International
Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC806AM
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Digital Transmission System
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0015  
CC 15C 2412.0  -  2462.0 0.131  

Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports ( 20 / 40 MHz) Bandwidths.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application LEw4QGRr5jKmO+fmP3U5OQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Fibocom Wireless Inc.
1101,Tower A, Building 6, Shenzhen International Innovation Valley, Dashi 1st Rd, Nanshan
ShenZhen,
China 		  Date of Grant: 09/10/2018

Application Dated: 09/06/2018
 
Attention: Lucy Liu , Certification Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZMOSC806AM
Name of Grantee:  Fibocom Wireless Inc.
Equipment Class: Digital Transmission System
Notes: LTE Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0015  
CC 15C 2412.0  -  2462.0 0.131  

Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. The device supports ( 20 / 40 MHz) Bandwidths.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: