FCC ID ZNPWD-ME5

Mesh

by Shenzhen Century Xinyang Tech Co., Ltd

Grantee Code: ZNP   Product Code: WDME5
Latest application date: 2021-05-11

FCC ID Device Details

FCC IDZNPWD-ME5
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeZNP
Product CodeWDME5
Applicant BusinessShenzhen Century Xinyang Tech Co., Ltd 🇨🇳
Related Domains sztianhao.com
Equipment ClassMesh
Test FirmShenzhen HUAK Testing Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2021-05-11
5180-5240 MHzOriginal Equipment2021-05-11

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2021-05-11PDF 4 MB
Int photoInternal Photos2021-05-11PDF 2.4 MB
Ext photoExternal Photos2021-05-11PDF 1.7 MB
labelID Label/Location Info2021-05-11PDF 368.5 KB
Test photoTest Setup Photos2021-05-11PDF 356 KB
test photoTest Setup Photos2021-05-11PDF 356 KB
Test reportTest Report2021-05-11PDF 3.7 MB
test reportTest Report2021-05-11PDF 5.9 MB
Agent_AuthorizationCover Letter(s)2021-05-11PDF 18.9 KB
FCC Long Term Confidentiality RequestCover Letter(s)2021-05-11PDF 20.4 KB
FCC Software Configuration Control DeclarationCover Letter(s)2021-05-11PDF 1.1 MB
FCC_Long_Term_Only_Confidentiality_RequestCover Letter(s)2021-05-11PDF 20.4 KB
MPE reportRF Exposure Info2021-05-11PDF 27.6 KB
Block Metadata onlyBlock DiagramPDF 231.9 KB
SCH Metadata onlySchematicsPDF 255.8 KB
Operation Description Metadata onlyOperational DescriptionPDF 118.3 KB
Operational Description Metadata onlyOperational DescriptionPDF 118.3 KB
SOFTWARE SECURITY DESCRIPTION Metadata onlySDR Software/Security InfPDF 570 KB

Application Information

Application IDw46Khh7FddQEFxCnefDzdQ==
Final Action Date2021-05-11
Application PurposeOriginal Equipment
Applicant FRN0020939831
ModelWD-ME5
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionMesh
Responsible PartyWiley Tsai, Manager, sales@sztianhao.com , +86-755-26616600
Technical ContactShenzhen Century Xinyang Tech Co., Ltd, sales@sztianhao.com
Test FirmJason Zhou, Shenzhen HUAK Testing Technology Co., Ltd., jason@cer-mark.com , +86-755-23029901
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
w46Khh7FddQEFxCnefDzdQ==2021-05-11Original Equipment
uZc6G//q+3mchz/+/WFrsw==2021-05-11Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.058750015CCC, MO
5180-5240 MHz0.0515215E38, CC, MO
5745-5825 MHz0.052615E38, CC, MO

Grants

TCB Grant - Application w46Khh7FddQEFxCnefDzdQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 05/11/2021

Application Dated: 05/11/2021
Shenzhen Century Xinyang Tech Co., Ltd
3F,North Building,Bantian High-tech industrial
Zone, No. 2 of Bell Road, Longgang,
Shenzhen, Guangdong,, 518129
China
 
Attention: Wiley Tsai , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZNPWD-ME5
Name of Grantee:  Shenzhen Century Xinyang Tech Co., Ltd
Equipment Class: Digital Transmission System
Notes: Mesh
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.05875  

Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application w46Khh7FddQEFxCnefDzdQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Century Xinyang Tech Co., Ltd
3F,North Building,Bantian High-tech industrial Zone, No. 2 of Bell Road, Longgang,
Shenzhen, Guangdong,, 518129
China
  Date of Grant: 05/11/2021

Application Dated: 05/11/2021
 
Attention: Wiley Tsai , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZNPWD-ME5
Name of Grantee:  Shenzhen Century Xinyang Tech Co., Ltd
Equipment Class: Digital Transmission System
Notes: Mesh
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.05875  

Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application uZc6G//q+3mchz/+/WFrsw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 05/11/2021

Application Dated: 05/11/2021
Shenzhen Century Xinyang Tech Co., Ltd
3F,North Building,Bantian High-tech industrial
Zone, No. 2 of Bell Road, Longgang,
Shenzhen, Guangdong,, 518129
China
 
Attention: Wiley Tsai , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZNPWD-ME5
Name of Grantee:  Shenzhen Century Xinyang Tech Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Mesh
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.05152  
38 CC MO 15E 5745.0  -  5825.0 0.0526  

Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application uZc6G//q+3mchz/+/WFrsw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Century Xinyang Tech Co., Ltd
3F,North Building,Bantian High-tech industrial Zone, No. 2 of Bell Road, Longgang,
Shenzhen, Guangdong,, 518129
China
  Date of Grant: 05/11/2021

Application Dated: 05/11/2021
 
Attention: Wiley Tsai , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZNPWD-ME5
Name of Grantee:  Shenzhen Century Xinyang Tech Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Mesh
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.05152  
38 CC MO 15E 5745.0  -  5825.0 0.0526  

Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: