FCC ID ZQ6-AP5811SA
AP5811SA
by AMPAK Technology Inc.
Grantee Code: ZQ6 Product Code: AP5811SA
Latest application date: 2026-04-01
FCC ID Device Details
| FCC ID | ZQ6-AP5811SA |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | ZQ6 |
| Product Code | AP5811SA |
| Applicant Business | AMPAK Technology Inc. 🇹🇼 |
| Related Domains |  ampak.com.tw  act-lab.com |
| Equipment Class | AP5811SA |
| Test Firm | Shenzhen Toby Technology Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2026-04-01 |
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2026-04-01 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2026-04-01 |
| 6895-7115 MHz | Class II permissive change or modification of presently authorized equipment | 2026-04-01 |
| 2402-2480 MHz | Original Equipment | 2025-07-11 |
| 5955-6415 MHz | Original Equipment | 2025-07-11 |
| 5180-5240 MHz | Original Equipment | 2025-07-11 |
| 2402-2480 MHz | Original Equipment | 2025-07-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2026-01-08 | PDF 1.5 MB |
| user manual | Users Manual | 2026-01-08 | PDF 1.5 MB |
| Intemal photos | Internal Photos | 2026-01-08 | PDF 1.8 MB |
| Internal Photos | Internal Photos | 2026-01-08 | PDF 1.8 MB |
| Inernal Photo | Internal Photos | 2025-08-25 | PDF 1.8 MB |
| Extermal Photos | External Photos | 2026-01-08 | PDF 1.7 MB |
| External phottos | External Photos | 2026-01-08 | PDF 1.7 MB |
| External PhotoS | External Photos | 2025-08-25 | PDF 1.7 MB |
| LABEL&LABEL LOCATION | ID Label/Location Info | 2025-07-11 | PDF 751.9 KB |
| Label Location | ID Label/Location Info | 2025-07-11 | PDF 751.9 KB |
| label location | ID Label/Location Info | 2025-07-11 | PDF 751.9 KB |
| Test Setup photos | Test Setup Photos | 2026-01-08 | PDF 1.2 MB |
| Test Setup Photos | Test Setup Photos | 2026-01-07 | PDF 1.2 MB |
| Tset Setup photo | Test Setup Photos | 2025-08-25 | PDF 1.2 MB |
| Dipole Antenna10(AD-303N) Metadata only | Test Setup Photos | 2025-07-11 | PDF 502.6 KB |
| NEW Antenna Spec. | Test Report | 2026-04-01 | PDF 435.7 KB |
| Test Report_6G RLAN | Test Report | 2026-04-01 | PDF 3.1 MB |
| Test Report_WLAN | Test Report | 2026-04-01 | PDF 1.3 MB |
| Test report_BLE | Test Report | 2026-04-01 | PDF 2.8 MB |
| Test report_BT | Test Report | 2026-04-01 | PDF 3 MB |
| Test report_RLAN | Test Report | 2026-04-01 | PDF 5.1 MB |
| Appendix A for BLE RF Test Data(ID) | Test Report | 2025-07-11 | PDF 3.2 MB |
| Appendix B for BT RF Test Data(ID) | Test Report | 2025-07-11 | PDF 4.7 MB |
| Appendix C for 2.4G WIFI RF Test Data(ID) | Test Report | 2025-07-11 | PDF 2.8 MB |
| Appendix D for 5G Wi-Fi RF Test Data(ID)_part1 | Test Report | 2025-07-11 | PDF 3.9 MB |
| Appendix D for 5G Wi-Fi RF Test Data(ID)_part2 | Test Report | 2025-07-11 | PDF 3.9 MB |
| Appendix D for 5G Wi-Fi RF Test Data(ID)_part3 | Test Report | 2025-07-11 | PDF 3.5 MB |
| Appendix D for 5G Wi-Fi RF Test Data(ID)_part4 | Test Report | 2025-07-11 | PDF 2.8 MB |
| Appendix E for 6G Wi-Fi RF Test Data(ID)_part1 | Test Report | 2025-07-11 | PDF 3.9 MB |
| Appendix E for 6G Wi-Fi RF Test Data(ID)_part2 | Test Report | 2025-07-11 | PDF 4 MB |
| Appendix E for 6G Wi-Fi RF Test Data(ID)_part3 | Test Report | 2025-07-11 | PDF 3.9 MB |
| Appendix E for 6G Wi-Fi RF Test Data(ID)_part4 | Test Report | 2025-07-11 | PDF 3.5 MB |
| Dipole Antenna1 (AD-103AG) | Test Report | 2025-07-11 | PDF 1.3 MB |
| Dipole Antenna10 (AD-501AX) | Test Report | 2025-07-11 | PDF 502.6 KB |
| Dipole Antenna10 (AD-510AX) | Test Report | 2025-07-11 | PDF 502.6 KB |
| Dipole Antenna10 (AD-512AX) | Test Report | 2025-07-11 | PDF 502.6 KB |
| Dipole Antenna2 (AD-301N) | Test Report | 2025-07-11 | PDF 1.4 MB |
| Dipole Antenna3 (AD-301N) | Test Report | 2025-07-11 | PDF 2.3 MB |
| Dipole Antenna3 (AD-302N) | Test Report | 2025-07-11 | PDF 2.3 MB |
| Dipole Antenna4 (AD-301N) | Test Report | 2025-07-11 | PDF 1.7 MB |
| Dipole Antenna4 (AD-303N) | Test Report | 2025-07-11 | PDF 1.7 MB |
| Dipole Antenna5 (AD-301N) | Test Report | 2025-07-11 | PDF 1.6 MB |
| Dipole Antenna5 (AD-303N) | Test Report | 2025-07-11 | PDF 1.6 MB |
| Dipole Antenna5 (AD-305N) | Test Report | 2025-07-11 | PDF 1.6 MB |
| Dipole Antenna6 (AD-303N) Metadata only | Test Report | 2025-07-11 | PDF 1.7 MB |
| Dipole Antenna6 (AD-501AX) | Test Report | 2025-07-11 | PDF 1.7 MB |
| Dipole Antenna7 (AD-501AX) | Test Report | 2025-07-11 | PDF 1.3 MB |
| Dipole Antenna7 (AD-510AX) | Test Report | 2025-07-11 | PDF 1.3 MB |
| Dipole Antenna7(AD-303N) Metadata only | Test Report | 2025-07-11 | PDF 1.3 MB |
| Dipole Antenna8 (AD-303N) Metadata only | Test Report | 2025-07-11 | PDF 972.7 KB |
| Dipole Antenna8 (AD-501AX) | Test Report | 2025-07-11 | PDF 972.7 KB |
| Dipole Antenna8 (AD-510AX) | Test Report | 2025-07-11 | PDF 972.7 KB |
| Dipole Antenna8 (AD-512AX) | Test Report | 2025-07-11 | PDF 972.7 KB |
| Dipole Antenna9 (AD-303N) Metadata only | Test Report | 2025-07-11 | PDF 505.2 KB |
| Dipole Antenna9 (AD-501AX) | Test Report | 2025-07-11 | PDF 505.2 KB |
| Dipole Antenna9 (AD-510AX) | Test Report | 2025-07-11 | PDF 505.2 KB |
| Dipole Antenna9 (AD-512AX) | Test Report | 2025-07-11 | PDF 505.2 KB |
| FCC-DFS Report (WIFI Slave) | Test Report | 2025-07-11 | PDF 1.3 MB |
| Test Report 6G RLAN (FCC) | Test Report | 2025-07-11 | PDF 4.1 MB |
| Test Report BLE(FCC) | Test Report | 2025-07-11 | PDF 3.6 MB |
| Test Report BT(FCC) | Test Report | 2025-07-11 | PDF 3.2 MB |
| Test Report RLAN (FCC) | Test Report | 2025-07-11 | PDF 4.7 MB |
| Test Report WLAN-(FCC) | Test Report | 2025-07-11 | PDF 4.1 MB |
| Attestation Statements-Kaspersky | Attestation Statements | 2026-04-01 | PDF 222.5 KB |
| Attestation Statements-Not Covered | Attestation Statements | 2026-04-01 | PDF 164.9 KB |
| Device Protocol Attestation Statement | Cover Letter(s) | 2026-04-01 | PDF 254.6 KB |
| US Agent attestation | Attestation Statements | 2026-04-01 | PDF 282.8 KB |
| 2.911_(d)(5)(i)(ii) Certification Equipment Type v1.2 | Attestation Statements | 2025-07-11 | PDF 174 KB |
| 2.911_(d)(5)(i)(ii) Certificiation Applicant v1.2 | Attestation Statements | 2025-07-11 | PDF 174 KB |
| Attestation_Statements_Kaspersky_Rev 1.0 | Attestation Statements | 2025-07-11 | PDF 369.7 KB |
| FCC_Attestation_Letter | Cover Letter(s) | 2025-07-11 | PDF 191.9 KB |
| U.S. Agent Letter of Attestation _Rev1.0 | Attestation Statements | 2025-07-11 | PDF 478.2 KB |
| US_Agent_2.911(d)(7)-U_V05(1) | Attestation Statements | 2025-07-11 | PDF 478.2 KB |
| Confidentiality request | Cover Letter(s) | 2026-04-01 | PDF 191 KB |
| FCC Class II PC request letter | Cover Letter(s) | 2026-04-01 | PDF 164.7 KB |
| FCC Modular Approval Request | Cover Letter(s) | 2026-04-01 | PDF 274.3 KB |
| POA | Cover Letter(s) | 2026-04-01 | PDF 170.7 KB |
| FCC Modular Approval Request Rev 1.0 | Cover Letter(s) | 2025-07-11 | PDF 484.6 KB |
| FCC Software Configuration Control Declaration Rev1.0 | Cover Letter(s) | 2025-07-11 | PDF 191.7 KB |
| FCC-Confidentiality-Request_Rev1.1 | Cover Letter(s) | 2025-07-11 | PDF 197.4 KB |
| FCC-POA_Rev1.0 | Cover Letter(s) | 2025-07-11 | PDF 173.5 KB |
| RF Exposure | RF Exposure Info | 2026-04-01 | PDF 2.2 MB |
| RF Exposure | RF Exposure Info | 2025-07-11 | PDF 965.3 KB |
| User manual Metadata only | Users Manual | 2026-09-28 | PDF 2.6 MB |
| Ext photo Metadata only | External Photos | 2026-09-28 | PDF 838.9 KB |
| Test photos ID Metadata only | Test Setup Photos | 2026-09-28 | PDF 1.1 MB |
| Test setup photo Metadata only | Test Setup Photos | 2026-09-28 | PDF 1.1 MB |
| Block Diagram Metadata only | Block Diagram | PDF 321.6 KB | |
| Block diagram Metadata only | Block Diagram | PDF 321.6 KB | |
| SCH Metadata only | Schematics | PDF 871.3 KB | |
| OP Metadata only | Operational Description | PDF 187.7 KB | |
| FCC Software Security Requirements for UNII devices Rev1.0 Metadata only | SDR Software/Security Info. | PDF 350.4 KB |
Application Information
| Application ID | xXyXGgZTIAIAtk3D3Vbu8w== |
|---|---|
| Final Action Date | 2026-04-01 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0021013693 |
| Model | AP5811SA |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | AP5811SA |
| Responsible Party | Chuchu Liu, rfct@ampak.com.tw , 886-3-600-9666 |
| Non-Technical Contact | Scott Huber, ACT Lab LLC, shuber@act-lab.com , (562) 470-7215 |
| Test Firm | Ray Lai, Shenzhen Toby Technology Co., Ltd., Ray.LAI@cotecna.com.cn  , 086-075526509301 |
| TCB Email | joe_chew@derycom-us.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Long-Term Confidentiality | Yes |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| xXyXGgZTIAIAtk3D3Vbu8w== | 2026-04-01 | Class II permissive change or modification of presently authorized equipment |
| ZuguHCAsBcOWFcNoyS6Wvg== | 2026-04-01 | Class II permissive change or modification of presently authorized equipment |
| Kwwmg0/T5yVRAzp+g9xUsg== | 2026-04-01 | Class II permissive change or modification of presently authorized equipment |
| 74S3laSdVkgI4yqyPIwfhQ== | 2026-04-01 | Class II permissive change or modification of presently authorized equipment |
| uDzpN2GUKrWemiUmNYh6ow== | 2025-07-11 | Original Equipment |
| Z+k2nOFuAYStTO3APsyWvA== | 2025-07-11 | Original Equipment |
| Dcx+qB+l8/4mE76RcmCtng== | 2025-07-11 | Original Equipment |
| 3YaPLuPWrWSGB19V7Zeb8w== | 2025-07-11 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application ZuguHCAsBcOWFcNoyS6Wvg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
DERYCOM CERTIFICATION SERVICES, INC. 1100 Falcon Avenue Glencoe, MN 55336 |
Date of Grant: 04/01/2026 Application Dated: 04/01/2026 |
| AMPAK Technology Inc. |
| 6F-2, No.23, Huanke 1st Rd., |
| Zhubei, 302047 Taiwan |
| Attention: Chuchu Liu , Project specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZQ6-AP5811SA |
| Name of Grantee: | AMPAK Technology Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | AP5811SA |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0292 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0222 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.0342 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0521 |
| Class II permissive change for adding a new antenna: EAF727A. Single Modular Approval. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
TCB Grant - Application Z+k2nOFuAYStTO3APsyWvA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
DERYCOM CERTIFICATION SERVICES, INC. 1100 Falcon Avenue Glencoe, MN 55336 |
Date of Grant: 07/11/2025 Application Dated: 07/11/2025 |
| AMPAK Technology Inc. |
| 6F-2, No.23, Huanke 1st Rd., |
| Zhubei, 302047 Taiwan |
| Attention: Chuchu Liu , Project specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZQ6-AP5811SA |
| Name of Grantee: | AMPAK Technology Inc. |
| Equipment Class: | 15E 6 GHz Low Power Indoor Client |
| Notes: | AP5811SA |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5955.0 - 6415.0 | 0.0065 | ||
| CC | 15E | 6435.0 - 6515.0 | 0.0072 | ||
| CC | 15E | 6535.0 - 6875.0 | 0.0071 | ||
| CC | 15E | 6895.0 - 7115.0 | 0.0062 |
| Single Modular Approval. Output power listed is EIRP. This device contains 20, 40 and 80 MHz signal bandwidth. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application xXyXGgZTIAIAtk3D3Vbu8w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
DERYCOM CERTIFICATION SERVICES, INC. 1100 Falcon Avenue Glencoe, MN 55336 |
Date of Grant: 04/01/2026 Application Dated: 04/01/2026 |
| AMPAK Technology Inc. |
| 6F-2, No.23, Huanke 1st Rd., |
| Zhubei, 302047 Taiwan |
| Attention: Chuchu Liu , Project specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZQ6-AP5811SA |
| Name of Grantee: | AMPAK Technology Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | AP5811SA |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0028 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0503 |
| Class II permissive change for adding a new antenna: EAF727A. Single Modular Approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application uDzpN2GUKrWemiUmNYh6ow==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
DERYCOM CERTIFICATION SERVICES, INC. 1100 Falcon Avenue Glencoe, MN 55336 |
Date of Grant: 07/11/2025 Application Dated: 07/11/2025 |
| AMPAK Technology Inc. |
| 6F-2, No.23, Huanke 1st Rd., |
| Zhubei, 302047 Taiwan |
| Attention: Chuchu Liu , Project specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZQ6-AP5811SA |
| Name of Grantee: | AMPAK Technology Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AP5811SA |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0041 |
| Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application Kwwmg0/T5yVRAzp+g9xUsg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
DERYCOM CERTIFICATION SERVICES, INC. 1100 Falcon Avenue Glencoe, MN 55336 |
Date of Grant: 04/01/2026 Application Dated: 04/01/2026 |
| AMPAK Technology Inc. |
| 6F-2, No.23, Huanke 1st Rd., |
| Zhubei, 302047 Taiwan |
| Attention: Chuchu Liu , Project specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZQ6-AP5811SA |
| Name of Grantee: | AMPAK Technology Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | AP5811SA |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0041 |
| Class II permissive change for adding a new antenna: EAF727A. Single Modular Approval. Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application Dcx+qB+l8/4mE76RcmCtng==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
DERYCOM CERTIFICATION SERVICES, INC. 1100 Falcon Avenue Glencoe, MN 55336 |
Date of Grant: 07/11/2025 Application Dated: 07/11/2025 |
| AMPAK Technology Inc. |
| 6F-2, No.23, Huanke 1st Rd., |
| Zhubei, 302047 Taiwan |
| Attention: Chuchu Liu , Project specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZQ6-AP5811SA |
| Name of Grantee: | AMPAK Technology Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | AP5811SA |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0292 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0222 | ||
| CC ND | 15E | 5500.0 - 5720.0 | 0.0342 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0521 |
| Single Modular Approval. Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
TCB Grant - Application 74S3laSdVkgI4yqyPIwfhQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
DERYCOM CERTIFICATION SERVICES, INC. 1100 Falcon Avenue Glencoe, MN 55336 |
Date of Grant: 04/01/2026 Application Dated: 04/01/2026 |
| AMPAK Technology Inc. |
| 6F-2, No.23, Huanke 1st Rd., |
| Zhubei, 302047 Taiwan |
| Attention: Chuchu Liu , Project specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZQ6-AP5811SA |
| Name of Grantee: | AMPAK Technology Inc. |
| Equipment Class: | 15E 6 GHz Low Power Indoor Client |
| Notes: | AP5811SA |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5955.0 - 6415.0 | 0.0065 | ||
| CC | 15E | 6435.0 - 6515.0 | 0.0072 | ||
| CC | 15E | 6535.0 - 6875.0 | 0.0071 | ||
| CC | 15E | 6895.0 - 7115.0 | 0.0062 |
| Class II permissive change for adding a new antenna: EAF727A. Single Modular Approval. Output power listed is EIRP. This device contains 20, 40 and 80 MHz signal bandwidth. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application 3YaPLuPWrWSGB19V7Zeb8w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
DERYCOM CERTIFICATION SERVICES, INC. 1100 Falcon Avenue Glencoe, MN 55336 |
Date of Grant: 07/11/2025 Application Dated: 07/11/2025 |
| AMPAK Technology Inc. |
| 6F-2, No.23, Huanke 1st Rd., |
| Zhubei, 302047 Taiwan |
| Attention: Chuchu Liu , Project specialist |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZQ6-AP5811SA |
| Name of Grantee: | AMPAK Technology Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | AP5811SA |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0028 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.0503 |
| Single Modular Approval. Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |