FCC ID ZQ6-AP6356SDXX
FCC ID ZQ6-AP6356SDXX Internal-Photos, ZQ6 AP6356SDXX, ZQ6-AP6356SDXX, ZQ6-AP63565DXX, ZQ6-AP63S6SDXX, ZO6-AP6356SDXX, Z06-AP6356SDXX
AMPAK Technology Inc. WLAN module for 802.11abgn(2x2) + 11ac+BT4.1 AP6356SDXX
An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product.
For example, the grantee code for FCC ID: ZQ6-AP6356SDXX is ZQ6. The remaining characters of the FCC ID, -AP6356SDXX, are often associated with the product model, but they can be random. These letters are chosen by the applicant.
In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.
Purchase on Amazon:
WLAN module for 802.11abgn(2x2) + 11ac+BT4.1
*Please Check Individual Documents for more images
- Application: WLAN module for 802.11abgn(2x2) + 11ac+BT4.1
- Equipment Class: DSS - Part 15 Spread Spectrum Transmitter
- Short Link: fcc.id/ZQ6-AP6356SDXX
- Sources: FCC.gov | FCC.report
- Registered By: AMPAK Technology Inc. - ZQ6 (Taiwan)
App # | Purpose | Date | Unique ID |
---|---|---|---|
1 | Original Equipment | 2015-12-31 | IfzwlWlsDR17g7sKNj7qNQ== |
2 | Original Equipment | 2015-12-31 | brkhH1kEn4426ZEFyRkp7g== |
3 | Original Equipment | 2015-12-31 | vgUle4ba8xMHi3a9Ggm5wg== |
4 | Class II Permissive Change | 2016-10-10 | G3XflNnggFwLqonLujE2Ug== |
5 | Class II Permissive Change | 2016-10-10 | fk29yOShL4hYfkCxb2iPjw== |
6 | Class II Permissive Change | 2016-10-10 | 0/uSS0s36J8Qgs4vh1n1ng== |
7 | Class II Permissive Change | 2017-11-09 | 2d+e+pCzF9MrrdzAxiyAtQ== |
8 | Class II Permissive Change | 2017-11-09 | 8PTJwG900lS8jWN3+MM8hA== |
9 | Class II Permissive Change | 2017-11-09 | nsUCoRy0nUHEysVH1l73Xg== |
10 | Class II Permissive Change | 2018-07-03 | 57wozkfpXC4nynjEPXwmSg== |
11 | Class II Permissive Change | 2018-07-03 | LVcDVoLODEPzHhy6acbqTw== |
12 | Class II Permissive Change | 2018-07-03 | VeBw8mzcktPfOW9KpH9OqQ== |
Operating Frequencies
Device operates within approved frequencies overlapping with the following cellular bands: LTE 255,Unlicensed NII-3 DOWN | LTE 46,TD Unlicensed DOWN |
Frequency Range | Power Output | Rule Parts | Grant Notes | App # |
---|---|---|---|---|
2.402-2.48 GHz ![]() | 6 mW | 15C | CC | 2.1 |
2.402-2.48 GHz ![]() | 5 mW | 15C | CC, MO | 3.2 |
2.402-2.48 GHz ![]() | 6 mW | 15C | CC | 6.1 |
2.402-2.48 GHz ![]() | 5 mW | 15C | CC, MO | 4.1 |
2.402-2.48 GHz ![]() | 6 mW | 15C | CC | 8.1 |
2.402-2.48 GHz ![]() | 5 mW | 15C | CC, MO | 9.1 |
2.402-2.48 GHz ![]() | 6 mW | 15C | CC | 11.1 |
2.402-2.48 GHz ![]() | 5 mW | 15C | CC, MO | 12.1 |
2.412-2.462 GHz ![]() | 31 mW | 15C | CC, MO | 3.1 |
2.412-2.462 GHz ![]() | 31 mW | 15C | CC, MO | 4.2 |
2.412-2.462 GHz ![]() | 31 mW | 15C | CC, MO | 9.2 |
2.412-2.462 GHz ![]() | 31 mW | 15C | CC, MO | 12.2 |
5.18-5.24 GHz ![]() | 17 mW | 15E | 38, CC, MO | 1.1 |
5.18-5.24 GHz ![]() | 17 mW | 15E | 38, CC, MO | 5.1 |
5.18-5.24 GHz ![]() | 17 mW | 15E | 38, CC, MO | 7.1 |
5.18-5.24 GHz ![]() | 17 mW | 15E | CC, MO | 10.1 |
5.26-5.32 GHz ![]() | 19 mW | 15E | 38, CC, MO | 5.3 |
5.26-5.32 GHz ![]() | 19 mW | 15E | 38, CC, MO | 7.3 |
5.26-5.32 GHz ![]() | 19 mW | 15E | CC, MO | 10.3 |
5.5-5.7 GHz ![]() | 19 mW | 15E | 38, CC, MO | 5.4 |
5.5-5.7 GHz ![]() | 19 mW | 15E | 38, CC, MO | 7.4 |
5.5-5.7 GHz ![]() | 19 mW | 15E | CC, MO | 10.4 |
5.745-5.825 GHz ![]() | 19 mW | 15E | 38, CC, MO | 1.2 |
5.745-5.825 GHz ![]() | 19 mW | 15E | 38, CC, MO | 5.2 |
5.745-5.825 GHz ![]() | 19 mW | 15E | 38, CC, MO | 7.2 |
5.745-5.825 GHz ![]() | 18 mW | 15E | CC, MO | 10.2 |
Exhibits
Available Exhibits
App # | Document | Type | Submitted Available |
---|---|---|---|
11 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (422 kB) |
2018-06-29 2018-07-03 |
11 | Test Report DSS | Test Report Adobe Acrobat PDF (985 kB) |
2018-06-29 2018-07-03 |
11 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (74 kB) |
2018-06-29 2018-07-03 |
11 | Internal Photos | Internal Photos Adobe Acrobat PDF (36 kB) |
2018-06-29 2018-07-03 |
11 | External Photos | External Photos Adobe Acrobat PDF (1308 kB) |
2018-06-29 2018-07-03 |
11 | Cover Letter - Description of Change | Cover Letter(s) Adobe Acrobat PDF (33 kB) |
2018-06-29 2018-07-03 |
11 | Agent Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (663 kB) |
2018-06-29 2018-07-03 |
12 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (422 kB) |
2018-06-29 2018-07-03 |
12 | Test Report DTS WLAN | Test Report Adobe Acrobat PDF (2033 kB) |
2018-06-29 2018-07-03 |
12 | Test Report DTS BT LE | Test Report Adobe Acrobat PDF (520 kB) |
2018-06-29 2018-07-03 |
12 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (74 kB) |
2018-06-29 2018-07-03 |
12 | Internal Photos | Internal Photos Adobe Acrobat PDF (36 kB) |
2018-06-29 2018-07-03 |
12 | External Photos | External Photos Adobe Acrobat PDF (1308 kB) |
2018-06-29 2018-07-03 |
12 | Cover Letter - Description of Change | Cover Letter(s) Adobe Acrobat PDF (33 kB) |
2018-06-29 2018-07-03 |
12 | Agent Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (663 kB) |
2018-06-29 2018-07-03 |
10 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (422 kB) |
2018-06-29 2018-07-03 |
10 | Test Report NII | Test Report Adobe Acrobat PDF (814 kB) |
2018-06-29 2018-07-03 |
10 | Test Report DFS | Test Report Adobe Acrobat PDF (686 kB) |
2018-06-29 2018-07-03 |
10 | RF Exposure Report | RF Exposure Info Adobe Acrobat PDF (74 kB) |
2018-06-29 2018-07-03 |
10 | Internal Photos | Internal Photos Adobe Acrobat PDF (36 kB) |
2018-06-29 2018-07-03 |
10 | External Photos | External Photos Adobe Acrobat PDF (1308 kB) |
2018-06-29 2018-07-03 |
10 | Cover Letter - Description of Change | Cover Letter(s) Adobe Acrobat PDF (33 kB) |
2018-06-29 2018-07-03 |
10 | Agent Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (663 kB) |
2018-06-29 2018-07-03 |
8 | MPE Report | RF Exposure Info Adobe Acrobat PDF (62 kB) |
2017-11-07 2017-11-09 |
8 | Test Report DSS | Test Report Adobe Acrobat PDF (1006 kB) |
2017-11-07 2017-11-09 |
8 | User Manual | Users Manual Adobe Acrobat PDF (154 kB) |
2017-11-07 2017-11-09 |
9 | RF Exposure MPE | RF Exposure Info Adobe Acrobat PDF (62 kB) |
2017-11-07 2017-11-09 |
8 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (520 kB) |
2017-11-07 2017-11-09 |
8 | Internal Photos | Internal Photos Adobe Acrobat PDF (156 kB) |
2017-11-07 2017-11-09 |
9 | Test Report DTS BT LE | Test Report Adobe Acrobat PDF (525 kB) |
2017-11-07 2017-11-09 |
9 | User Manual | Users Manual Adobe Acrobat PDF (154 kB) |
2017-11-07 2017-11-09 |
8 | External Photo | External Photos Adobe Acrobat PDF (161 kB) |
2017-11-07 2017-11-09 |
9 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (520 kB) |
2017-11-07 2017-11-09 |
8 | Letter POA | Cover Letter(s) Adobe Acrobat PDF (245 kB) |
2017-11-07 2017-11-09 |
9 | Internal Photos | Internal Photos Adobe Acrobat PDF (156 kB) |
2017-11-07 2017-11-09 |
8 | Description of Change | Cover Letter(s) Adobe Acrobat PDF (33 kB) |
2017-11-07 2017-11-09 |
9 | External Photos | External Photos Adobe Acrobat PDF (161 kB) |
2017-11-07 2017-11-09 |
9 | Letter POA | Cover Letter(s) Adobe Acrobat PDF (245 kB) |
2017-11-07 2017-11-09 |
9 | Description of Change | Cover Letter(s) Adobe Acrobat PDF (33 kB) |
2017-11-07 2017-11-09 |
7 | RF Exposure MPE | RF Exposure Info Adobe Acrobat PDF (62 kB) |
2017-11-07 2017-11-09 |
7 | Test Report NII | Test Report Adobe Acrobat PDF (1015 kB) |
2017-11-07 2017-11-09 |
7 | Test Report DFS | Test Report Adobe Acrobat PDF (679 kB) |
2017-11-07 2017-11-09 |
7 | User Manual | Users Manual Adobe Acrobat PDF (154 kB) |
2017-11-07 2017-11-09 |
7 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (520 kB) |
2017-11-07 2017-11-09 |
7 | Internal Photos | Internal Photos Adobe Acrobat PDF (156 kB) |
2017-11-07 2017-11-09 |
7 | External Photos | External Photos Adobe Acrobat PDF (161 kB) |
2017-11-07 2017-11-09 |
7 | Letter POA | Cover Letter(s) Adobe Acrobat PDF (245 kB) |
2017-11-07 2017-11-09 |
7 | Description of Change | Cover Letter(s) Adobe Acrobat PDF (33 kB) |
2017-11-07 2017-11-09 |
6 | User Manuel | Users Manual Adobe Acrobat PDF (1742 kB) |
2016-10-05 2016-10-10 |
6 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (431 kB) |
2016-10-05 2016-10-10 |
6 | RF Exposure Information | RF Exposure Info Adobe Acrobat PDF (3317 kB) |
2016-10-05 2016-10-10 |
6 | Agent Authorization | Cover Letter(s) Adobe Acrobat PDF (493 kB) |
2016-10-05 2016-10-10 |
6 | Desciption of Change | Cover Letter(s) Adobe Acrobat PDF (22 kB) |
2016-10-05 2016-10-10 |
4 | User Manuel | Users Manual Adobe Acrobat PDF (1742 kB) |
2016-10-05 2016-10-10 |
4 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (431 kB) |
2016-10-05 2016-10-10 |
4 | RF Exposure Information | RF Exposure Info Adobe Acrobat PDF (3317 kB) |
2016-10-05 2016-10-10 |
4 | Agent Authorization | Cover Letter(s) Adobe Acrobat PDF (493 kB) |
2016-10-05 2016-10-10 |
4 | Desciption of Change | Cover Letter(s) Adobe Acrobat PDF (22 kB) |
2016-10-05 2016-10-10 |
5 | User Manual | Users Manual Adobe Acrobat PDF (1742 kB) |
2016-10-05 2016-10-10 |
5 | Test Setup Photos SAR | Test Setup Photos Adobe Acrobat PDF (431 kB) |
2016-10-05 2016-10-10 |
5 | Test Setup photos | Test Setup Photos Adobe Acrobat PDF (303 kB) |
2016-10-05 2016-10-10 |
5 | Test Report NII | Test Report Adobe Acrobat PDF (508 kB) |
2016-10-05 2016-10-10 |
5 | Test Report DFS | Test Report Adobe Acrobat PDF (677 kB) |
2016-10-05 2016-10-10 |
5 | RF Exposure Information SAR | RF Exposure Info Adobe Acrobat PDF (3317 kB) |
2016-10-05 2016-10-10 |
5 | Agent Authorization | Cover Letter(s) Adobe Acrobat PDF (493 kB) |
2016-10-05 2016-10-10 |
5 | Description of Change | Cover Letter(s) Adobe Acrobat PDF (22 kB) |
2016-10-05 2016-10-10 |
5 | Confidential Request Letter | Cover Letter(s) Adobe Acrobat PDF (320 kB) |
2016-10-05 2016-10-10 |
2 | User Manual | Users Manual Adobe Acrobat PDF (263 kB) |
2015-12-30 2015-12-31 |
2 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (484 kB) |
2015-12-30 2015-12-31 |
2 | Test Report | Test Report Adobe Acrobat PDF (923 kB) |
2015-12-30 2015-12-31 |
2 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (57 kB) |
2015-12-30 2015-12-31 |
2 | Label Sample | ID Label/Location Info Adobe Acrobat PDF (149 kB) |
2015-12-30 2015-12-31 |
2 | Label Info | ID Label/Location Info Adobe Acrobat PDF (129 kB) |
2015-12-30 2015-12-31 |
2 | Internal Photos | Internal Photos Adobe Acrobat PDF (1512 kB) |
2015-12-30 2015-12-31 |
2 | External Photos | External Photos Adobe Acrobat PDF (538 kB) |
2015-12-30 2015-12-31 |
2 | Modular Approval Letter | Cover Letter(s) Adobe Acrobat PDF (50 kB) |
2015-12-30 2015-12-31 |
2 | Agent Authorization | Cover Letter(s) Adobe Acrobat PDF (231 kB) |
2015-12-30 2015-12-31 |
2 | Confidentiality Letter | Cover Letter(s) Adobe Acrobat PDF (257 kB) |
2015-12-30 2015-12-31 |
2 | Channel and Mode Declaration | Cover Letter(s) Adobe Acrobat PDF (162 kB) |
2015-12-30 2015-12-31 |
3 | User Manual | Users Manual Adobe Acrobat PDF (263 kB) |
2015-12-30 2015-12-31 |
3 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (484 kB) |
2015-12-30 2015-12-31 |
3 | Test Report DTS WLAN | Test Report Adobe Acrobat PDF (1950 kB) |
2015-12-30 2015-12-31 |
3 | Test Report DTS BT LE | Test Report Adobe Acrobat PDF (438 kB) |
2015-12-30 2015-12-31 |
3 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (57 kB) |
2015-12-30 2015-12-31 |
3 | Label Sample | ID Label/Location Info Adobe Acrobat PDF (149 kB) |
2015-12-30 2015-12-31 |
3 | Label Location | ID Label/Location Info Adobe Acrobat PDF (129 kB) |
2015-12-30 2015-12-31 |
3 | Internal Photos | Internal Photos Adobe Acrobat PDF (1512 kB) |
2015-12-30 2015-12-31 |
3 | External Photos | External Photos Adobe Acrobat PDF (538 kB) |
2015-12-30 2015-12-31 |
3 | Modular Approval Letter | Cover Letter(s) Adobe Acrobat PDF (50 kB) |
2015-12-30 2015-12-31 |
3 | Agent Authorization | Cover Letter(s) Adobe Acrobat PDF (231 kB) |
2015-12-30 2015-12-31 |
3 | Confidentiality Letter | Cover Letter(s) Adobe Acrobat PDF (257 kB) |
2015-12-30 2015-12-31 |
3 | Channel and Mode Declaration | Cover Letter(s) Adobe Acrobat PDF (162 kB) |
2015-12-30 2015-12-31 |
1 | User Manual | Users Manual Adobe Acrobat PDF (263 kB) |
2015-12-30 2015-12-31 |
1 | Test Setup Photo | Test Setup Photos Adobe Acrobat PDF (484 kB) |
2015-12-30 2015-12-31 |
1 | Test Report | Test Report Adobe Acrobat PDF (547 kB) |
2015-12-30 2015-12-31 |
1 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (57 kB) |
2015-12-30 2015-12-31 |
1 | Label Sample | ID Label/Location Info Adobe Acrobat PDF (149 kB) |
2015-12-30 2015-12-31 |
1 | Label Location | ID Label/Location Info Adobe Acrobat PDF (129 kB) |
2015-12-30 2015-12-31 |
1 | Internal Photos | Internal Photos Adobe Acrobat PDF (1512 kB) |
2015-12-30 2015-12-31 |
1 | External Photos | External Photos Adobe Acrobat PDF (538 kB) |
2015-12-30 2015-12-31 |
1 | Modular Approval Request | Cover Letter(s) Adobe Acrobat PDF (50 kB) |
2015-12-30 2015-12-31 |
1 | Agent Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (231 kB) |
2015-12-30 2015-12-31 |
1 | Confidentiality Request | Cover Letter(s) Adobe Acrobat PDF (257 kB) |
2015-12-30 2015-12-31 |
1 | Channel and Mode Declaration | Cover Letter(s) Adobe Acrobat PDF (162 kB) |
2015-12-30 2015-12-31 |
APP # 11 (2018-07-03)
App # | Document | Type | Submitted Available |
---|---|---|---|
11 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (422 kB) |
2018-06-29 00:00:00 2018-07-03 00:00:00 |
11 | Test Report DSS | Test Report Adobe Acrobat PDF (985 kB) |
2018-06-29 00:00:00 2018-07-03 00:00:00 |
11 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (74 kB) |
2018-06-29 00:00:00 2018-07-03 00:00:00 |
11 | Internal Photos | Internal Photos Adobe Acrobat PDF (36 kB) |
2018-06-29 00:00:00 2018-07-03 00:00:00 |
11 | External Photos | External Photos Adobe Acrobat PDF (1308 kB) |
2018-06-29 00:00:00 2018-07-03 00:00:00 |
11 | Cover Letter - Description of Change | Cover Letter(s) Adobe Acrobat PDF (33 kB) |
2018-06-29 00:00:00 2018-07-03 00:00:00 |
11 | Agent Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (663 kB) |
2018-06-29 00:00:00 2018-07-03 00:00:00 |
APP # 12 (2018-07-03)
App # | Document | Type | Submitted Available |
---|---|---|---|
12 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (422 kB) |
2018-06-29 00:00:00 2018-07-03 00:00:00 |
12 | Test Report DTS WLAN | Test Report Adobe Acrobat PDF (2033 kB) |
2018-06-29 00:00:00 2018-07-03 00:00:00 |
12 | Test Report DTS BT LE | Test Report Adobe Acrobat PDF (520 kB) |
2018-06-29 00:00:00 2018-07-03 00:00:00 |
12 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (74 kB) |
2018-06-29 00:00:00 2018-07-03 00:00:00 |
12 | Internal Photos | Internal Photos Adobe Acrobat PDF (36 kB) |
2018-06-29 00:00:00 2018-07-03 00:00:00 |
12 | External Photos | External Photos Adobe Acrobat PDF (1308 kB) |
2018-06-29 00:00:00 2018-07-03 00:00:00 |
12 | Cover Letter - Description of Change | Cover Letter(s) Adobe Acrobat PDF (33 kB) |
2018-06-29 00:00:00 2018-07-03 00:00:00 |
12 | Agent Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (663 kB) |
2018-06-29 00:00:00 2018-07-03 00:00:00 |
APP # 10 (2018-07-03)
App # | Document | Type | Submitted Available |
---|---|---|---|
10 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (422 kB) |
2018-06-29 00:00:00 2018-07-03 00:00:00 |
10 | Test Report NII | Test Report Adobe Acrobat PDF (814 kB) |
2018-06-29 00:00:00 2018-07-03 00:00:00 |
10 | Test Report DFS | Test Report Adobe Acrobat PDF (686 kB) |
2018-06-29 00:00:00 2018-07-03 00:00:00 |
10 | RF Exposure Report | RF Exposure Info Adobe Acrobat PDF (74 kB) |
2018-06-29 00:00:00 2018-07-03 00:00:00 |
10 | Internal Photos | Internal Photos Adobe Acrobat PDF (36 kB) |
2018-06-29 00:00:00 2018-07-03 00:00:00 |
10 | External Photos | External Photos Adobe Acrobat PDF (1308 kB) |
2018-06-29 00:00:00 2018-07-03 00:00:00 |
10 | Cover Letter - Description of Change | Cover Letter(s) Adobe Acrobat PDF (33 kB) |
2018-06-29 00:00:00 2018-07-03 00:00:00 |
10 | Agent Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (663 kB) |
2018-06-29 00:00:00 2018-07-03 00:00:00 |
APP # 8 (2017-11-09)
App # | Document | Type | Submitted Available |
---|---|---|---|
8 | MPE Report | RF Exposure Info Adobe Acrobat PDF (62 kB) |
2017-11-07 00:00:00 2017-11-09 00:00:00 |
8 | Test Report DSS | Test Report Adobe Acrobat PDF (1006 kB) |
2017-11-07 00:00:00 2017-11-09 00:00:00 |
8 | User Manual | Users Manual Adobe Acrobat PDF (154 kB) |
2017-11-07 00:00:00 2017-11-09 00:00:00 |
APP # 9 (2017-11-09)
App # | Document | Type | Submitted Available |
---|---|---|---|
9 | RF Exposure MPE | RF Exposure Info Adobe Acrobat PDF (62 kB) |
2017-11-07 00:00:00 2017-11-09 00:00:00 |
APP # 8 (2017-11-09)
App # | Document | Type | Submitted Available |
---|---|---|---|
8 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (520 kB) |
2017-11-07 00:00:00 2017-11-09 00:00:00 |
8 | Internal Photos | Internal Photos Adobe Acrobat PDF (156 kB) |
2017-11-07 00:00:00 2017-11-09 00:00:00 |
APP # 9 (2017-11-09)
App # | Document | Type | Submitted Available |
---|---|---|---|
9 | Test Report DTS BT LE | Test Report Adobe Acrobat PDF (525 kB) |
2017-11-07 00:00:00 2017-11-09 00:00:00 |
9 | User Manual | Users Manual Adobe Acrobat PDF (154 kB) |
2017-11-07 00:00:00 2017-11-09 00:00:00 |
APP # 8 (2017-11-09)
App # | Document | Type | Submitted Available |
---|---|---|---|
8 | External Photo | External Photos Adobe Acrobat PDF (161 kB) |
2017-11-07 00:00:00 2017-11-09 00:00:00 |
APP # 9 (2017-11-09)
App # | Document | Type | Submitted Available |
---|---|---|---|
9 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (520 kB) |
2017-11-07 00:00:00 2017-11-09 00:00:00 |
APP # 8 (2017-11-09)
App # | Document | Type | Submitted Available |
---|---|---|---|
8 | Letter POA | Cover Letter(s) Adobe Acrobat PDF (245 kB) |
2017-11-07 00:00:00 2017-11-09 00:00:00 |
APP # 9 (2017-11-09)
App # | Document | Type | Submitted Available |
---|---|---|---|
9 | Internal Photos | Internal Photos Adobe Acrobat PDF (156 kB) |
2017-11-07 00:00:00 2017-11-09 00:00:00 |
APP # 8 (2017-11-09)
App # | Document | Type | Submitted Available |
---|---|---|---|
8 | Description of Change | Cover Letter(s) Adobe Acrobat PDF (33 kB) |
2017-11-07 00:00:00 2017-11-09 00:00:00 |
APP # 9 (2017-11-09)
App # | Document | Type | Submitted Available |
---|---|---|---|
9 | External Photos | External Photos Adobe Acrobat PDF (161 kB) |
2017-11-07 00:00:00 2017-11-09 00:00:00 |
9 | Letter POA | Cover Letter(s) Adobe Acrobat PDF (245 kB) |
2017-11-07 00:00:00 2017-11-09 00:00:00 |
9 | Description of Change | Cover Letter(s) Adobe Acrobat PDF (33 kB) |
2017-11-07 00:00:00 2017-11-09 00:00:00 |
APP # 7 (2017-11-09)
App # | Document | Type | Submitted Available |
---|---|---|---|
7 | RF Exposure MPE | RF Exposure Info Adobe Acrobat PDF (62 kB) |
2017-11-07 00:00:00 2017-11-09 00:00:00 |
7 | Test Report NII | Test Report Adobe Acrobat PDF (1015 kB) |
2017-11-07 00:00:00 2017-11-09 00:00:00 |
7 | Test Report DFS | Test Report Adobe Acrobat PDF (679 kB) |
2017-11-07 00:00:00 2017-11-09 00:00:00 |
7 | User Manual | Users Manual Adobe Acrobat PDF (154 kB) |
2017-11-07 00:00:00 2017-11-09 00:00:00 |
7 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (520 kB) |
2017-11-07 00:00:00 2017-11-09 00:00:00 |
7 | Internal Photos | Internal Photos Adobe Acrobat PDF (156 kB) |
2017-11-07 00:00:00 2017-11-09 00:00:00 |
7 | External Photos | External Photos Adobe Acrobat PDF (161 kB) |
2017-11-07 00:00:00 2017-11-09 00:00:00 |
7 | Letter POA | Cover Letter(s) Adobe Acrobat PDF (245 kB) |
2017-11-07 00:00:00 2017-11-09 00:00:00 |
7 | Description of Change | Cover Letter(s) Adobe Acrobat PDF (33 kB) |
2017-11-07 00:00:00 2017-11-09 00:00:00 |
APP # 6 (2016-10-10)
App # | Document | Type | Submitted Available |
---|---|---|---|
6 | User Manuel | Users Manual Adobe Acrobat PDF (1742 kB) |
2016-10-05 00:00:00 2016-10-10 00:00:00 |
6 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (431 kB) |
2016-10-05 00:00:00 2016-10-10 00:00:00 |
6 | RF Exposure Information | RF Exposure Info Adobe Acrobat PDF (3317 kB) |
2016-10-05 00:00:00 2016-10-10 00:00:00 |
6 | Agent Authorization | Cover Letter(s) Adobe Acrobat PDF (493 kB) |
2016-10-05 00:00:00 2016-10-10 00:00:00 |
6 | Desciption of Change | Cover Letter(s) Adobe Acrobat PDF (22 kB) |
2016-10-05 00:00:00 2016-10-10 00:00:00 |
APP # 4 (2016-10-10)
App # | Document | Type | Submitted Available |
---|---|---|---|
4 | User Manuel | Users Manual Adobe Acrobat PDF (1742 kB) |
2016-10-05 00:00:00 2016-10-10 00:00:00 |
4 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (431 kB) |
2016-10-05 00:00:00 2016-10-10 00:00:00 |
4 | RF Exposure Information | RF Exposure Info Adobe Acrobat PDF (3317 kB) |
2016-10-05 00:00:00 2016-10-10 00:00:00 |
4 | Agent Authorization | Cover Letter(s) Adobe Acrobat PDF (493 kB) |
2016-10-05 00:00:00 2016-10-10 00:00:00 |
4 | Desciption of Change | Cover Letter(s) Adobe Acrobat PDF (22 kB) |
2016-10-05 00:00:00 2016-10-10 00:00:00 |
APP # 5 (2016-10-10)
App # | Document | Type | Submitted Available |
---|---|---|---|
5 | User Manual | Users Manual Adobe Acrobat PDF (1742 kB) |
2016-10-05 00:00:00 2016-10-10 00:00:00 |
5 | Test Setup Photos SAR | Test Setup Photos Adobe Acrobat PDF (431 kB) |
2016-10-05 00:00:00 2016-10-10 00:00:00 |
5 | Test Setup photos | Test Setup Photos Adobe Acrobat PDF (303 kB) |
2016-10-05 00:00:00 2016-10-10 00:00:00 |
5 | Test Report NII | Test Report Adobe Acrobat PDF (508 kB) |
2016-10-05 00:00:00 2016-10-10 00:00:00 |
5 | Test Report DFS | Test Report Adobe Acrobat PDF (677 kB) |
2016-10-05 00:00:00 2016-10-10 00:00:00 |
5 | RF Exposure Information SAR | RF Exposure Info Adobe Acrobat PDF (3317 kB) |
2016-10-05 00:00:00 2016-10-10 00:00:00 |
5 | Agent Authorization | Cover Letter(s) Adobe Acrobat PDF (493 kB) |
2016-10-05 00:00:00 2016-10-10 00:00:00 |
5 | Description of Change | Cover Letter(s) Adobe Acrobat PDF (22 kB) |
2016-10-05 00:00:00 2016-10-10 00:00:00 |
5 | Confidential Request Letter | Cover Letter(s) Adobe Acrobat PDF (320 kB) |
2016-10-05 00:00:00 2016-10-10 00:00:00 |
APP # 2 (2015-12-31)
App # | Document | Type | Submitted Available |
---|---|---|---|
2 | User Manual | Users Manual Adobe Acrobat PDF (263 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
2 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (484 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
2 | Test Report | Test Report Adobe Acrobat PDF (923 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
2 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (57 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
2 | Label Sample | ID Label/Location Info Adobe Acrobat PDF (149 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
2 | Label Info | ID Label/Location Info Adobe Acrobat PDF (129 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
2 | Internal Photos | Internal Photos Adobe Acrobat PDF (1512 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
2 | External Photos | External Photos Adobe Acrobat PDF (538 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
2 | Modular Approval Letter | Cover Letter(s) Adobe Acrobat PDF (50 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
2 | Agent Authorization | Cover Letter(s) Adobe Acrobat PDF (231 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
2 | Confidentiality Letter | Cover Letter(s) Adobe Acrobat PDF (257 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
2 | Channel and Mode Declaration | Cover Letter(s) Adobe Acrobat PDF (162 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
APP # 3 (2015-12-31)
App # | Document | Type | Submitted Available |
---|---|---|---|
3 | User Manual | Users Manual Adobe Acrobat PDF (263 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
3 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (484 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
3 | Test Report DTS WLAN | Test Report Adobe Acrobat PDF (1950 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
3 | Test Report DTS BT LE | Test Report Adobe Acrobat PDF (438 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
3 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (57 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
3 | Label Sample | ID Label/Location Info Adobe Acrobat PDF (149 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
3 | Label Location | ID Label/Location Info Adobe Acrobat PDF (129 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
3 | Internal Photos | Internal Photos Adobe Acrobat PDF (1512 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
3 | External Photos | External Photos Adobe Acrobat PDF (538 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
3 | Modular Approval Letter | Cover Letter(s) Adobe Acrobat PDF (50 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
3 | Agent Authorization | Cover Letter(s) Adobe Acrobat PDF (231 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
3 | Confidentiality Letter | Cover Letter(s) Adobe Acrobat PDF (257 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
3 | Channel and Mode Declaration | Cover Letter(s) Adobe Acrobat PDF (162 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
APP # 1 (2015-12-31)
App # | Document | Type | Submitted Available |
---|---|---|---|
1 | User Manual | Users Manual Adobe Acrobat PDF (263 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
1 | Test Setup Photo | Test Setup Photos Adobe Acrobat PDF (484 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
1 | Test Report | Test Report Adobe Acrobat PDF (547 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
1 | RF Exposure | RF Exposure Info Adobe Acrobat PDF (57 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
1 | Label Sample | ID Label/Location Info Adobe Acrobat PDF (149 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
1 | Label Location | ID Label/Location Info Adobe Acrobat PDF (129 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
1 | Internal Photos | Internal Photos Adobe Acrobat PDF (1512 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
1 | External Photos | External Photos Adobe Acrobat PDF (538 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
1 | Modular Approval Request | Cover Letter(s) Adobe Acrobat PDF (50 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
1 | Agent Authorization Letter | Cover Letter(s) Adobe Acrobat PDF (231 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
1 | Confidentiality Request | Cover Letter(s) Adobe Acrobat PDF (257 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
1 | Channel and Mode Declaration | Cover Letter(s) Adobe Acrobat PDF (162 kB) |
2015-12-30 00:00:00 2015-12-31 00:00:00 |
APP # 2 (2015-12-31)
App # | Document | Type | Submitted Available |
---|---|---|---|
2 | Operational Description | Operational Description Adobe Acrobat PDF (37 kB) |
2015-12-30 00:00:00 N/A |
2 | Schematics | Schematics Adobe Acrobat PDF (51 kB) |
2015-12-30 00:00:00 N/A |
APP # 3 (2015-12-31)
App # | Document | Type | Submitted Available |
---|---|---|---|
3 | Operational Description | Operational Description Adobe Acrobat PDF (37 kB) |
2015-12-30 00:00:00 N/A |
APP # 1 (2015-12-31)
App # | Document | Type | Submitted Available |
---|---|---|---|
1 | Operational Description | Operational Description Adobe Acrobat PDF (37 kB) |
2015-12-30 00:00:00 N/A |
APP # 3 (2015-12-31)
App # | Document | Type | Submitted Available |
---|---|---|---|
3 | Schematics | Schematics Adobe Acrobat PDF (51 kB) |
2015-12-30 00:00:00 N/A |
APP # 2 (2015-12-31)
App # | Document | Type | Submitted Available |
---|---|---|---|
2 | Block Diagram | Block Diagram Adobe Acrobat PDF (114 kB) |
2015-12-30 00:00:00 N/A |
APP # 3 (2015-12-31)
App # | Document | Type | Submitted Available |
---|---|---|---|
3 | Block Diagram | Block Diagram Adobe Acrobat PDF (114 kB) |
2015-12-30 00:00:00 N/A |
APP # 1 (2015-12-31)
App # | Document | Type | Submitted Available |
---|---|---|---|
1 | Block Diagram | Block Diagram Adobe Acrobat PDF (114 kB) |
2015-12-30 00:00:00 N/A |
APP # 5 (2016-10-10)
App # | Document | Type | Submitted Available |
---|---|---|---|
5 | Operational Description Software | Operational Description Adobe Acrobat PDF (89 kB) |
2016-10-05 00:00:00 N/A |
APP # 1 (2015-12-31)
App # | Document | Type | Submitted Available |
---|---|---|---|
1 | Operational Description Software Security | Operational Description Adobe Acrobat PDF (948 kB) |
2015-12-30 00:00:00 N/A |
1 | Schematics | Schematics Adobe Acrobat PDF (51 kB) |
2015-12-30 00:00:00 N/A |
Application Forms
Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
Applications are submitted for FCC ID and Grant requests. Click an above application to view details
Grants
TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
Certification | ||
Issued Under the Authority of the | ||
Federal Communications Commission | ||
By: |
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 10/10/2016 |
AMPAK Technology Inc. |
3F, No. 1, Jen AI Road, Hsinchu Industrial Park, |
Hsinchu, 30352 Taiwan |
Attention: Changyi Tsai , Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | ZQ6-AP6356SDXX |
Name of Grantee: | AMPAK Technology Inc. |
Equipment Class: | Part 15 Spread Spectrum Transmitter |
Notes: | WLAN module for 802.11abgn(2x2) + 11ac+BT4.1 |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
CC | 15C | 2402.0 - 2480.0 | 0.006 |
Output power listed is conducted. Single Modular Approval for portable RF Exposure conditions. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.. The highest reported SAR for this device is <0.10 W/kg. This device supports 20 and 40 MHz modes. |
CC: | This device is certified pursuant to two different Part 15 rules sections. |
COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
Certification |
AMPAK Technology Inc. 3F, No. 1, Jen AI Road, Hsinchu Industrial Park, P.O. Box , Hsinchu, 30352 Taiwan |
Date of Grant: 10/10/2016 |
Attention: Changyi Tsai , Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | ZQ6-AP6356SDXX |
Name of Grantee: | AMPAK Technology Inc. |
Equipment Class: | Part 15 Spread Spectrum Transmitter |
Notes: | WLAN module for 802.11abgn(2x2) + 11ac+BT4.1 |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
CC | 15C | 2402.0 - 2480.0 | 0.006 |
Output power listed is conducted. Single Modular Approval for portable RF Exposure conditions. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.. The highest reported SAR for this device is <0.10 W/kg. This device supports 20 and 40 MHz modes. |
CC: | This device is certified pursuant to two different Part 15 rules sections. |
Mail To: |
EA213067 |
TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
Certification | ||
Issued Under the Authority of the | ||
Federal Communications Commission | ||
By: |
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 11/09/2017 |
AMPAK Technology Inc. |
3F, No. 1, Jen AI Road, Hsinchu Industrial Park, |
Hsinchu, 30352 Taiwan |
Attention: Changyi Tsai , Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | ZQ6-AP6356SDXX |
Name of Grantee: | AMPAK Technology Inc. |
Equipment Class: | Unlicensed National Information Infrastructure TX |
Notes: | WLAN module for 802.11abgn(2x2) + 11ac+BT4.1 |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
38 CC MO | 15E | 5180.0 - 5240.0 | 0.017 | ||
38 CC MO | 15E | 5745.0 - 5825.0 | 0.019 | ||
38 CC MO | 15E | 5260.0 - 5320.0 | 0.019 | ||
38 CC MO | 15E | 5500.0 - 5700.0 | 0.019 |
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20/40/80 MHz modes. |
38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
CC: | This device is certified pursuant to two different Part 15 rules sections. |
MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
Certification |
AMPAK Technology Inc. 3F, No. 1, Jen AI Road, Hsinchu Industrial Park, P.O. Box , Hsinchu, 30352 Taiwan |
Date of Grant: 11/09/2017 |
Attention: Changyi Tsai , Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | ZQ6-AP6356SDXX |
Name of Grantee: | AMPAK Technology Inc. |
Equipment Class: | Unlicensed National Information Infrastructure TX |
Notes: | WLAN module for 802.11abgn(2x2) + 11ac+BT4.1 |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
38 CC MO | 15E | 5180.0 - 5240.0 | 0.017 | ||
38 CC MO | 15E | 5745.0 - 5825.0 | 0.019 | ||
38 CC MO | 15E | 5260.0 - 5320.0 | 0.019 | ||
38 CC MO | 15E | 5500.0 - 5700.0 | 0.019 |
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20/40/80 MHz modes. |
38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
CC: | This device is certified pursuant to two different Part 15 rules sections. |
MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
Mail To: |
EA245736 |
TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
Certification | ||
Issued Under the Authority of the | ||
Federal Communications Commission | ||
By: |
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/03/2018 |
AMPAK Technology Inc. |
3F, No. 1, Jen AI Road, Hsinchu Industrial Park, |
Hsinchu, 30352 Taiwan |
Attention: Changyi Tsai , Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | ZQ6-AP6356SDXX |
Name of Grantee: | AMPAK Technology Inc. |
Equipment Class: | Unlicensed National Information Infrastructure TX |
Notes: | WLAN module for 802.11abgn(2x2) + 11ac + BT4.1 |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
CC MO | 15E | 5180.0 - 5240.0 | 0.017 | ||
CC MO | 15E | 5745.0 - 5825.0 | 0.018 | ||
CC MO | 15E | 5260.0 - 5320.0 | 0.019 | ||
CC MO | 15E | 5500.0 - 5700.0 | 0.019 |
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20/40/80 MHz modes. |
CC: | This device is certified pursuant to two different Part 15 rules sections. |
MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
Certification |
AMPAK Technology Inc. 3F, No. 1, Jen AI Road, Hsinchu Industrial Park, P.O. Box , Hsinchu, 30352 Taiwan |
Date of Grant: 07/03/2018 |
Attention: Changyi Tsai , Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | ZQ6-AP6356SDXX |
Name of Grantee: | AMPAK Technology Inc. |
Equipment Class: | Unlicensed National Information Infrastructure TX |
Notes: | WLAN module for 802.11abgn(2x2) + 11ac + BT4.1 |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
CC MO | 15E | 5180.0 - 5240.0 | 0.017 | ||
CC MO | 15E | 5745.0 - 5825.0 | 0.018 | ||
CC MO | 15E | 5260.0 - 5320.0 | 0.019 | ||
CC MO | 15E | 5500.0 - 5700.0 | 0.019 |
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20/40/80 MHz modes. |
CC: | This device is certified pursuant to two different Part 15 rules sections. |
MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
Mail To: |
EA326910 |
TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
Certification | ||
Issued Under the Authority of the | ||
Federal Communications Commission | ||
By: |
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 11/09/2017 |
AMPAK Technology Inc. |
3F, No. 1, Jen AI Road, Hsinchu Industrial Park, |
Hsinchu, 30352 Taiwan |
Attention: Changyi Tsai , Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | ZQ6-AP6356SDXX |
Name of Grantee: | AMPAK Technology Inc. |
Equipment Class: | Part 15 Spread Spectrum Transmitter |
Notes: | WLAN module for 802.11abgn(2x2) + 11ac+BT4.1 |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
CC | 15C | 2402.0 - 2480.0 | 0.006 |
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
CC: | This device is certified pursuant to two different Part 15 rules sections. |
COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
Certification |
AMPAK Technology Inc. 3F, No. 1, Jen AI Road, Hsinchu Industrial Park, P.O. Box , Hsinchu, 30352 Taiwan |
Date of Grant: 11/09/2017 |
Attention: Changyi Tsai , Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | ZQ6-AP6356SDXX |
Name of Grantee: | AMPAK Technology Inc. |
Equipment Class: | Part 15 Spread Spectrum Transmitter |
Notes: | WLAN module for 802.11abgn(2x2) + 11ac+BT4.1 |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
CC | 15C | 2402.0 - 2480.0 | 0.006 |
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
CC: | This device is certified pursuant to two different Part 15 rules sections. |
Mail To: |
EA131738 |
TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
Certification | ||
Issued Under the Authority of the | ||
Federal Communications Commission | ||
By: |
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 12/31/2015 |
AMPAK Technology Inc. |
3F, No. 1, Jen AI Road, Hsinchu Industrial Park, |
Hsinchu, 30352 Taiwan |
Attention: Changyi Tsai , Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | ZQ6-AP6356SDXX |
Name of Grantee: | AMPAK Technology Inc. |
Equipment Class: | Part 15 Spread Spectrum Transmitter |
Notes: | WLAN module for 802.11abgn(2x2) + 11ac+BT4.1 |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
CC | 15C | 2402.0 - 2480.0 | 0.006 |
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
CC: | This device is certified pursuant to two different Part 15 rules sections. |
COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
Certification |
AMPAK Technology Inc. 3F, No. 1, Jen AI Road, Hsinchu Industrial Park, P.O. Box , Hsinchu, 30352 Taiwan |
Date of Grant: 12/31/2015 |
Attention: Changyi Tsai , Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | ZQ6-AP6356SDXX |
Name of Grantee: | AMPAK Technology Inc. |
Equipment Class: | Part 15 Spread Spectrum Transmitter |
Notes: | WLAN module for 802.11abgn(2x2) + 11ac+BT4.1 |
Modular Type: | Does not apply |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
CC | 15C | 2402.0 - 2480.0 | 0.006 |
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
CC: | This device is certified pursuant to two different Part 15 rules sections. |
Mail To: |
EA673546 |
TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
Certification | ||
Issued Under the Authority of the | ||
Federal Communications Commission | ||
By: |
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 10/10/2016 |
AMPAK Technology Inc. |
3F, No. 1, Jen AI Road, Hsinchu Industrial Park, |
Hsinchu, 30352 Taiwan |
Attention: Changyi Tsai , Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | ZQ6-AP6356SDXX |
Name of Grantee: | AMPAK Technology Inc. |
Equipment Class: | Unlicensed National Information Infrastructure TX |
Notes: | WLAN module for 802.11abgn(2x2) + 11ac+BT4.1 |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
38 CC MO | 15E | 5180.0 - 5240.0 | 0.017 | ||
38 CC MO | 15E | 5745.0 - 5825.0 | 0.019 | ||
38 CC MO | 15E | 5260.0 - 5320.0 | 0.019 | ||
38 CC MO | 15E | 5500.0 - 5700.0 | 0.019 |
Output power listed is conducted. Single Modular Approval for portable RF Exposure conditions. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for this device is 0.35 W/kg. This device supports 20, 40, and 80 MHz modes. |
38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
CC: | This device is certified pursuant to two different Part 15 rules sections. |
MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
Certification |
AMPAK Technology Inc. 3F, No. 1, Jen AI Road, Hsinchu Industrial Park, P.O. Box , Hsinchu, 30352 Taiwan |
Date of Grant: 10/10/2016 |
Attention: Changyi Tsai , Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | ZQ6-AP6356SDXX |
Name of Grantee: | AMPAK Technology Inc. |
Equipment Class: | Unlicensed National Information Infrastructure TX |
Notes: | WLAN module for 802.11abgn(2x2) + 11ac+BT4.1 |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
38 CC MO | 15E | 5180.0 - 5240.0 | 0.017 | ||
38 CC MO | 15E | 5745.0 - 5825.0 | 0.019 | ||
38 CC MO | 15E | 5260.0 - 5320.0 | 0.019 | ||
38 CC MO | 15E | 5500.0 - 5700.0 | 0.019 |
Output power listed is conducted. Single Modular Approval for portable RF Exposure conditions. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The highest reported SAR for this device is 0.35 W/kg. This device supports 20, 40, and 80 MHz modes. |
38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
CC: | This device is certified pursuant to two different Part 15 rules sections. |
MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
Mail To: |
EA318438 |
TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
Certification | ||
Issued Under the Authority of the | ||
Federal Communications Commission | ||
By: |
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 10/10/2016 |
AMPAK Technology Inc. |
3F, No. 1, Jen AI Road, Hsinchu Industrial Park, |
Hsinchu, 30352 Taiwan |
Attention: Changyi Tsai , Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | ZQ6-AP6356SDXX |
Name of Grantee: | AMPAK Technology Inc. |
Equipment Class: | Digital Transmission System |
Notes: | WLAN module for 802.11abgn(2x2) + 11ac+BT4.1 |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
CC MO | 15C | 2402.0 - 2480.0 | 0.005 | ||
CC MO | 15C | 2412.0 - 2462.0 | 0.031 |
ith antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.. The highest reported SAR for this device is 0.73 W/kg. This device supports 20 and 40 MHz modes. |
CC: | This device is certified pursuant to two different Part 15 rules sections. |
MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
Certification |
AMPAK Technology Inc. 3F, No. 1, Jen AI Road, Hsinchu Industrial Park, P.O. Box , Hsinchu, 30352 Taiwan |
Date of Grant: 10/10/2016 |
Attention: Changyi Tsai , Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | ZQ6-AP6356SDXX |
Name of Grantee: | AMPAK Technology Inc. |
Equipment Class: | Digital Transmission System |
Notes: | WLAN module for 802.11abgn(2x2) + 11ac+BT4.1 |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
CC MO | 15C | 2402.0 - 2480.0 | 0.005 | ||
CC MO | 15C | 2412.0 - 2462.0 | 0.031 |
ith antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 0.5-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device.. The highest reported SAR for this device is 0.73 W/kg. This device supports 20 and 40 MHz modes. |
CC: | This device is certified pursuant to two different Part 15 rules sections. |
MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
Mail To: |
EA435117 |
TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
Certification | ||
Issued Under the Authority of the | ||
Federal Communications Commission | ||
By: |
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 12/31/2015 |
AMPAK Technology Inc. |
3F, No. 1, Jen AI Road, Hsinchu Industrial Park, |
Hsinchu, 30352 Taiwan |
Attention: Changyi Tsai , Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | ZQ6-AP6356SDXX |
Name of Grantee: | AMPAK Technology Inc. |
Equipment Class: | Unlicensed National Information Infrastructure TX |
Notes: | WLAN module for 802.11abgn(2x2) + 11ac+BT4.1 |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
38 CC MO | 15E | 5180.0 - 5240.0 | 0.017 | ||
38 CC MO | 15E | 5745.0 - 5825.0 | 0.019 |
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20/40/80 MHz modes. |
38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured, installed or imported after the June 1, 2016 transition deadline. |
CC: | This device is certified pursuant to two different Part 15 rules sections. |
MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
Certification |
AMPAK Technology Inc. 3F, No. 1, Jen AI Road, Hsinchu Industrial Park, P.O. Box , Hsinchu, 30352 Taiwan |
Date of Grant: 12/31/2015 |
Attention: Changyi Tsai , Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | ZQ6-AP6356SDXX |
Name of Grantee: | AMPAK Technology Inc. |
Equipment Class: | Unlicensed National Information Infrastructure TX |
Notes: | WLAN module for 802.11abgn(2x2) + 11ac+BT4.1 |
Modular Type: | Does not apply |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
38 CC MO | 15E | 5180.0 - 5240.0 | 0.017 | ||
38 CC MO | 15E | 5745.0 - 5825.0 | 0.019 |
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20/40/80 MHz modes. |
38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured, installed or imported after the June 1, 2016 transition deadline. |
CC: | This device is certified pursuant to two different Part 15 rules sections. |
MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
Mail To: |
EA790194 |
TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
Certification | ||
Issued Under the Authority of the | ||
Federal Communications Commission | ||
By: |
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/03/2018 |
AMPAK Technology Inc. |
3F, No. 1, Jen AI Road, Hsinchu Industrial Park, |
Hsinchu, 30352 Taiwan |
Attention: Changyi Tsai , Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | ZQ6-AP6356SDXX |
Name of Grantee: | AMPAK Technology Inc. |
Equipment Class: | Part 15 Spread Spectrum Transmitter |
Notes: | WLAN module for 802.11abgn(2x2) + 11ac + BT4.1 |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
CC | 15C | 2402.0 - 2480.0 | 0.006 |
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. This device must be used with antennas identified in this filing, or those having a gain of less than 3.8 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
CC: | This device is certified pursuant to two different Part 15 rules sections. |
COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
Certification |
AMPAK Technology Inc. 3F, No. 1, Jen AI Road, Hsinchu Industrial Park, P.O. Box , Hsinchu, 30352 Taiwan |
Date of Grant: 07/03/2018 |
Attention: Changyi Tsai , Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | ZQ6-AP6356SDXX |
Name of Grantee: | AMPAK Technology Inc. |
Equipment Class: | Part 15 Spread Spectrum Transmitter |
Notes: | WLAN module for 802.11abgn(2x2) + 11ac + BT4.1 |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
CC | 15C | 2402.0 - 2480.0 | 0.006 |
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. This device must be used with antennas identified in this filing, or those having a gain of less than 3.8 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. |
CC: | This device is certified pursuant to two different Part 15 rules sections. |
Mail To: |
EA566957 |
TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
Certification | ||
Issued Under the Authority of the | ||
Federal Communications Commission | ||
By: |
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 11/09/2017 |
AMPAK Technology Inc. |
3F, No. 1, Jen AI Road, Hsinchu Industrial Park, |
Hsinchu, 30352 Taiwan |
Attention: Changyi Tsai , Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | ZQ6-AP6356SDXX |
Name of Grantee: | AMPAK Technology Inc. |
Equipment Class: | Digital Transmission System |
Notes: | WLAN module for 802.11abgn(2x2) + 11ac+BT4.1 |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
CC MO | 15C | 2402.0 - 2480.0 | 0.005 | ||
CC MO | 15C | 2412.0 - 2462.0 | 0.031 |
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz modes. |
CC: | This device is certified pursuant to two different Part 15 rules sections. |
MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
Certification |
AMPAK Technology Inc. 3F, No. 1, Jen AI Road, Hsinchu Industrial Park, P.O. Box , Hsinchu, 30352 Taiwan |
Date of Grant: 11/09/2017 |
Attention: Changyi Tsai , Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | ZQ6-AP6356SDXX |
Name of Grantee: | AMPAK Technology Inc. |
Equipment Class: | Digital Transmission System |
Notes: | WLAN module for 802.11abgn(2x2) + 11ac+BT4.1 |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
CC MO | 15C | 2402.0 - 2480.0 | 0.005 | ||
CC MO | 15C | 2412.0 - 2462.0 | 0.031 |
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz modes. |
CC: | This device is certified pursuant to two different Part 15 rules sections. |
MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
Mail To: |
EA930225 |
TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
Certification | ||
Issued Under the Authority of the | ||
Federal Communications Commission | ||
By: |
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/03/2018 |
AMPAK Technology Inc. |
3F, No. 1, Jen AI Road, Hsinchu Industrial Park, |
Hsinchu, 30352 Taiwan |
Attention: Changyi Tsai , Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | ZQ6-AP6356SDXX |
Name of Grantee: | AMPAK Technology Inc. |
Equipment Class: | Digital Transmission System |
Notes: | WLAN module for 802.11abgn(2x2) + 11ac + BT4.1 |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
CC MO | 15C | 2402.0 - 2480.0 | 0.005 | ||
CC MO | 15C | 2412.0 - 2462.0 | 0.031 |
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. This device must be used with antennas identified in this filing, or those having a gain of less than 3.8 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz modes. |
CC: | This device is certified pursuant to two different Part 15 rules sections. |
MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
Certification |
AMPAK Technology Inc. 3F, No. 1, Jen AI Road, Hsinchu Industrial Park, P.O. Box , Hsinchu, 30352 Taiwan |
Date of Grant: 07/03/2018 |
Attention: Changyi Tsai , Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | ZQ6-AP6356SDXX |
Name of Grantee: | AMPAK Technology Inc. |
Equipment Class: | Digital Transmission System |
Notes: | WLAN module for 802.11abgn(2x2) + 11ac + BT4.1 |
Modular Type: | Single Modular |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
CC MO | 15C | 2402.0 - 2480.0 | 0.005 | ||
CC MO | 15C | 2412.0 - 2462.0 | 0.031 |
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. This device must be used with antennas identified in this filing, or those having a gain of less than 3.8 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz modes. |
CC: | This device is certified pursuant to two different Part 15 rules sections. |
MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
Mail To: |
EA961587 |
TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
Certification | ||
Issued Under the Authority of the | ||
Federal Communications Commission | ||
By: |
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 12/31/2015 |
AMPAK Technology Inc. |
3F, No. 1, Jen AI Road, Hsinchu Industrial Park, |
Hsinchu, 30352 Taiwan |
Attention: Changyi Tsai , Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | ZQ6-AP6356SDXX |
Name of Grantee: | AMPAK Technology Inc. |
Equipment Class: | Digital Transmission System |
Notes: | WLAN module for 802.11abgn(2x2) + 11ac+BT4.1 |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
CC MO | 15C | 2412.0 - 2462.0 | 0.031 | ||
CC MO | 15C | 2402.0 - 2480.0 | 0.005 |
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz modes. |
CC: | This device is certified pursuant to two different Part 15 rules sections. |
MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
Certification |
AMPAK Technology Inc. 3F, No. 1, Jen AI Road, Hsinchu Industrial Park, P.O. Box , Hsinchu, 30352 Taiwan |
Date of Grant: 12/31/2015 |
Attention: Changyi Tsai , Manager |
NOT TRANSFERABLE |
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
FCC IDENTIFIER: | ZQ6-AP6356SDXX |
Name of Grantee: | AMPAK Technology Inc. |
Equipment Class: | Digital Transmission System |
Notes: | WLAN module for 802.11abgn(2x2) + 11ac+BT4.1 |
Modular Type: | Does not apply |
Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
CC MO | 15C | 2412.0 - 2462.0 | 0.031 | ||
CC MO | 15C | 2402.0 - 2480.0 | 0.005 |
Output power listed is conducted. Single Modular Approval for mobile RF Exposure condition. This device must be used with antennas identified in this filing, or those having a gain of less than 5.5 dBi, and must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20-cm from all persons. Approval is limited to OEM installation only. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. This device supports 20 and 40 MHz modes. |
CC: | This device is certified pursuant to two different Part 15 rules sections. |
MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
Mail To: |
EA592098 |