FCC ID ZQO-CX8703H
Airplay Module
by MICROCHIP TECHNOLOGY INC.
Grantee Code: ZQO Product Code: CX8703H
Latest application date: 2012-05-16
FCC ID Device Details
| FCC ID | ZQO-CX8703H |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | ZQO |
| Product Code | CX8703H |
| Applicant Business | MICROCHIP TECHNOLOGY INC. 🇺🇸 |
| Related Domains |  microchip.com |
| Equipment Class | Airplay Module |
| Test Firm | QuieTek Corporation |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2012-05-16 |
| 2412-2462 MHz | Original Equipment | 2011-07-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| manual | Users Manual | 2012-05-16 | PDF 3.5 MB |
| manual | Users Manual | 2011-07-20 | PDF 3.4 MB |
| int pho | Internal Photos | 2012-05-16 | PDF 884.5 KB |
| int pho | Internal Photos | 2011-07-20 | PDF 1,022.7 KB |
| ext pho | External Photos | 2012-05-16 | PDF 323.8 KB |
| ext pho | External Photos | 2011-07-20 | PDF 319.9 KB |
| label | ID Label/Location Info | 2012-05-16 | PDF 161.6 KB |
| label sample | ID Label/Location Info | 2012-05-16 | PDF 45.5 KB |
| label | ID Label/Location Info | 2011-07-20 | PDF 104.4 KB |
| opodes | Operational Description | 2011-07-20 | PDF 13.8 KB |
| setup pho | Test Setup Photos | 2012-05-16 | PDF 21.3 KB |
| setup pho | Test Setup Photos | 2011-07-20 | PDF 286.6 KB |
| test report | Test Report | 2012-05-16 | PDF 1.4 MB |
| test report | Test Report | 2011-07-20 | PDF 3.2 MB |
| attestaion | Cover Letter(s) | 2012-05-16 | PDF 72.2 KB |
| auth | Cover Letter(s) | 2012-05-16 | PDF 80.8 KB |
| class II change | Cover Letter(s) | 2012-05-16 | PDF 12.7 KB |
| conf | Cover Letter(s) | 2012-05-16 | PDF 13.1 KB |
| auth | Cover Letter(s) | 2011-07-20 | PDF 40 KB |
| conf | Cover Letter(s) | 2011-07-20 | PDF 54.9 KB |
| modular approval | Cover Letter(s) | 2011-07-20 | PDF 122.2 KB |
| rf exp | RF Exposure Info | 2012-05-16 | PDF 37.9 KB |
| rf exp | RF Exposure Info | 2011-07-20 | PDF 37.8 KB |
Application Information
| Application ID | hfuaX4+ANz6TWrZfeaOFuw== |
|---|---|
| Final Action Date | 2012-05-16 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0001596279 |
| Model | -CX8703H |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Airplay Module |
| Responsible Party | SANJAY MALANI, STAFF ENGINEER, sanjay.malani@microchip.com , (480)792-7200 |
| Technical Contact | QuieTek Corporation, vincent@quietek.com  |
| Test Firm | Warren Lin, QuieTek Corporation, warren@quietek.com , 886-3592-8858 |
| TCB Email | rnabod@hotmail.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators in devices that provide regulated 3.3 Vdc to the module, to guarantee stable power supply according to the requirements of DA-00-1407. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. PCC2, shield + antenna added |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| hfuaX4+ANz6TWrZfeaOFuw== | 2012-05-16 | Class II permissive change or modification of presently authorized equipment |
| uzZDz59+ltujzbq8Lqp8CQ== | 2011-07-20 | Original Equipment |
Grants
TCB Grant - Application uzZDz59+ltujzbq8Lqp8CQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Edisonstraat 12a Zevenaar, NL-6902 PK Netherlands |
Date of Grant: 07/20/2011 Application Dated: 07/18/2011 |
| MICROCHIP TECHNOLOGY INC. |
| 2355 W. Chandler Blvd. |
| Chandler, AZ 85224-6199 |
| Attention: SANJAY MALANI , STAFF ENGINEER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZQO-CX8703H |
| Name of Grantee: | MICROCHIP TECHNOLOGY INC. |
| Equipment Class: | Digital Transmission System |
| Notes: | JukeBlox Networked Media Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.2786 |
| Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators in devices that provide regulated 3.3 Vdc to the module, to guarantee stable power supply according to the requirements of DA-00-1407. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application uzZDz59+ltujzbq8Lqp8CQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MICROCHIP TECHNOLOGY INC. 2355 W. Chandler Blvd. Chandler, AZ 85224-6199 United States |
Date of Grant: 07/20/2011 Application Dated: 07/18/2011 |
| Attention: SANJAY MALANI , STAFF ENGINEER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZQO-CX8703H |
| Name of Grantee: | MICROCHIP TECHNOLOGY INC. |
| Equipment Class: | Digital Transmission System |
| Notes: | JukeBlox Networked Media Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.2786 |
| Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators in devices that provide regulated 3.3 Vdc to the module, to guarantee stable power supply according to the requirements of DA-00-1407. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Edisonstraat 12a Zevenaar, NL-6902 PK Netherlands |
Date of Grant: 05/16/2012 Application Dated: 05/15/2012 |
| MICROCHIP TECHNOLOGY INC. |
| 2355 W. Chandler Blvd. |
| Chandler, AZ 85224-6199 |
| Attention: SANJAY MALANI , STAFF ENGINEER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZQO-CX8703H |
| Name of Grantee: | MICROCHIP TECHNOLOGY INC. |
| Equipment Class: | Digital Transmission System |
| Notes: | Airplay Module |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.27 |
| Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators in devices that provide regulated 3.3 Vdc to the module, to guarantee stable power supply according to the requirements of DA-00-1407. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. PCC2, shield + antenna added |
EAS Grant - Application hfuaX4+ANz6TWrZfeaOFuw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
MICROCHIP TECHNOLOGY INC. 2355 W. Chandler Blvd. Chandler, AZ 85224-6199 United States |
Date of Grant: 05/16/2012 Application Dated: 05/15/2012 |
| Attention: SANJAY MALANI , STAFF ENGINEER |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZQO-CX8703H |
| Name of Grantee: | MICROCHIP TECHNOLOGY INC. |
| Equipment Class: | Digital Transmission System |
| Notes: | Airplay Module |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.27 |
| Power output listed is conducted. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators in devices that provide regulated 3.3 Vdc to the module, to guarantee stable power supply according to the requirements of DA-00-1407. The antennas used for this transmitter as shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users may not be provided with the module installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. PCC2, shield + antenna added |
| Mail To: |