FCC ID ZQWGIT000002
MIFARE TGS READER
by TECHNOGYM S.p.A.
Grantee Code: ZQW Product Code: GIT000002
Latest application date: 2013-05-24
FCC ID Device Details
| FCC ID | ZQWGIT000002 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | ZQW |
| Product Code | GIT000002 |
| Applicant Business | TECHNOGYM S.p.A. 🇮🇹 |
| Related Domains |  technogym.com |
| Equipment Class | MIFARE TGS READER |
| Test Firm | 7layers AG |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2013-05-24 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: SVE-WMPG10 Grant Date: 02/04/2005 | 2013-04-16 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External photo | External Photos | 2013-04-16 | PDF 228.8 KB |
| Label | ID Label/Location Info | 2013-04-16 | PDF 54.8 KB |
| Lable location | ID Label/Location Info | 2013-04-16 | PDF 228.8 KB |
| Test setup photos | Test Setup Photos | 2013-05-24 | PDF 285.2 KB |
| Test report | Test Report | 2013-05-24 | PDF 1,021.5 KB |
| Statement on change | Cover Letter(s) | 2013-05-24 | PDF 47.8 KB |
| Permission letter | Cover Letter(s) | 2013-04-16 | PDF 17.9 KB |
| Request letter | Cover Letter(s) | 2013-04-16 | PDF 13.5 KB |
Application Information
| Application ID | FfvpHXZtRWkY5R8f1r4HjA== |
|---|---|
| Final Action Date | 2013-05-24 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0020947800 |
| Model | GIT000002 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | MIFARE TGS READER |
| Responsible Party | Pierluigi Alessandri, Vice President, fdamiani@technogym.com , 39-0547650111 |
| Agent | 7Layers AG, patrick.lomax@gmail.com  |
| Test Firm | Robert Machulec, 7layers AG, robert.machulec@7layers.de  , 49-2102-749-313 |
| TCB Email | certification@telefication.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. Modular Approval for mobile RF Exposure conditions per section 2.1091 of FCC rules, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. PCC2: use permitted near module with FCC ID ZQWGIT000001 |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| FfvpHXZtRWkY5R8f1r4HjA== | 2013-05-24 | Class II permissive change or modification of presently authorized equipment |
| gC4DTKLNKHzd1Z3JttAIMw== | 2013-04-16 | Change in identification of presently authorized equipment. Original FCC ID: SVE-WMPG10 Grant Date: 02/04/2005 |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.1630000 | 15C |
Grants
TCB Grant - Application gC4DTKLNKHzd1Z3JttAIMw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Edisonstraat 12a Zevenaar, NL-6902 PK Netherlands |
Date of Grant: 04/16/2013 Application Dated: 04/12/2013 |
| TECHNOGYM S.p.A. |
| Via G. Perticari, 20 |
| Gambettola, 47035 Italy |
| Attention: Pierluigi Alessandri , Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZQWGIT000002 |
| Name of Grantee: | TECHNOGYM S.p.A. |
| Equipment Class: | Digital Transmission System |
| Notes: | MIFARE TGS READER |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.163 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions per section 2.1091 of FCC rules, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
EAS Grant - Application gC4DTKLNKHzd1Z3JttAIMw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TECHNOGYM S.p.A. Via G. Perticari, 20 Gambettola, 47035 Italy |
Date of Grant: 04/16/2013 Application Dated: 04/12/2013 |
| Attention: Pierluigi Alessandri , Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZQWGIT000002 |
| Name of Grantee: | TECHNOGYM S.p.A. |
| Equipment Class: | Digital Transmission System |
| Notes: | MIFARE TGS READER |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.163 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions per section 2.1091 of FCC rules, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Telefication B.V. Edisonstraat 12a Zevenaar, NL-6902 PK Netherlands |
Date of Grant: 05/24/2013 Application Dated: 05/22/2013 |
| TECHNOGYM S.p.A. |
| Via G. Perticari, 20 |
| Gambettola, 47035 Italy |
| Attention: Pierluigi Alessandri , Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZQWGIT000002 |
| Name of Grantee: | TECHNOGYM S.p.A. |
| Equipment Class: | Digital Transmission System |
| Notes: | MIFARE TGS READER |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.163 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions per section 2.1091 of FCC rules, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. PCC2: use permitted near module with FCC ID ZQWGIT000001 |
EAS Grant - Application FfvpHXZtRWkY5R8f1r4HjA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
TECHNOGYM S.p.A. Via G. Perticari, 20 Gambettola, 47035 Italy |
Date of Grant: 05/24/2013 Application Dated: 05/22/2013 |
| Attention: Pierluigi Alessandri , Vice President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZQWGIT000002 |
| Name of Grantee: | TECHNOGYM S.p.A. |
| Equipment Class: | Digital Transmission System |
| Notes: | MIFARE TGS READER |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.163 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions per section 2.1091 of FCC rules, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The only antennas approved for use with this module are those documented in the filings under this FCC ID. PCC2: use permitted near module with FCC ID ZQWGIT000001 |
| Mail To: |