FCC ID ZTT-ALLYR1900

Whole Home Smart Wi-Fi Router

by Amped Wireless

Grantee Code: ZTT   Product Code: ALLYR1900
Latest application date: 2016-11-03

FCC ID Device Details

FCC IDZTT-ALLYR1900
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeZTT
Product CodeALLYR1900
Applicant BusinessAmped Wireless 🇺🇸
Related Domains dpiinc.com
Equipment ClassWhole Home Smart Wi-Fi Router
Test FirmSPORTON International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2016-11-03
5180-5240 MHzOriginal Equipment2016-11-03

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2017-05-02PDF 4.1 MB
User ManuelUsers Manual2017-05-02PDF 4.1 MB
Internal PhotosInternal Photos2017-05-02PDF 2 MB
External PhotosExternal Photos2017-05-02PDF 411.3 KB
Label and LocationID Label/Location Info2016-11-03PDF 227.2 KB
Test Setup PhotosTest Setup Photos2017-05-02PDF 285.9 KB
Test Setup photosTest Setup Photos2017-05-02PDF 285.9 KB
MPE Test ReportRF Exposure Info2016-11-03PDF 366.9 KB
RF Test ReportTest Report2016-11-03PDF 4.2 MB
Radiated Emission Co Location ReportTest Report2016-11-03PDF 111.3 KB
Test Report 2.4GTest Report2016-11-03PDF 2.7 MB
Confidentiality LetterCover Letter(s)2016-11-03PDF 222.2 KB
Confidentiality Request LetterCover Letter(s)2016-11-03PDF 222.2 KB
DOC LetterCover Letter(s)2016-11-03PDF 118.3 KB
DoC LetterCover Letter(s)2016-11-03PDF 118.3 KB
POACover Letter(s)2016-11-03PDF 120.1 KB
Power of Attorney Elijah TsaiCover Letter(s)2016-11-03PDF 26 KB
MPE ReportRF Exposure Info2016-11-03PDF 366.9 KB
Block Diagram Metadata onlyBlock DiagramPDF 9.9 KB
Schematics Metadata onlySchematicsPDF 399 KB
Operational Description Metadata onlyOperational DescriptionPDF 86.8 KB
Operational Description SW Security Metadata onlySDR Software/Security InfPDF 25.8 KB

Application Information

Application IDWT4tLDoZ9610HzdzIV9TAg==
Final Action Date2016-11-03
Application PurposeOriginal Equipment
Applicant FRN0021051008
ModelALLYR1900
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWhole Home Smart Wi-Fi Router
Responsible PartyPaul Green, CFO of DPI Inc Parent of Newo Corp dba Amped Wirel, pgreen@dpiinc.com , 3146572330
Test FirmSharon Jiang, SPORTON International Inc., sharonjiang@sporton.com.tw , 886-3-656-9065
TCB EmailTEI@TIMCOENGR.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date05/02/2017
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40MHz bandwidth modes.

Applications

Application IDDatePurpose
WT4tLDoZ9610HzdzIV9TAg==2016-11-03Original Equipment
Q40W3akKRB7lHWzgMJR+GA==2016-11-03Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.733000015CCC, MO
5180-5240 MHz0.59215E38, CC, MO
5745-5825 MHz0.98915E38, CC, MO

Grants

TCB Grant - Application WT4tLDoZ9610HzdzIV9TAg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/03/2016

Application Dated: 11/02/2016
Amped Wireless
13089 Peyton Dr. #C307
Chino Hills, CA 91709
 
Attention: Paul Green , CFO of DPI Inc Parent of Newo Corp dba Amped Wir

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZTT-ALLYR1900
Name of Grantee:  Amped Wireless
Equipment Class: Digital Transmission System
Notes: Whole Home Smart Wi-Fi Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.733  

Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application WT4tLDoZ9610HzdzIV9TAg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Amped Wireless
13089 Peyton Dr. #C307
Chino Hills, CA 91709
United States
  Date of Grant: 11/03/2016

Application Dated: 11/02/2016
 
Attention: Paul Green , CFO of DPI Inc Parent of Newo Corp dba Amped Wir

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZTT-ALLYR1900
Name of Grantee:  Amped Wireless
Equipment Class: Digital Transmission System
Notes: Whole Home Smart Wi-Fi Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.733  

Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20 and 40MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application Q40W3akKRB7lHWzgMJR+GA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 11/03/2016

Application Dated: 11/02/2016
Amped Wireless
13089 Peyton Dr. #C307
Chino Hills, CA 91709
 
Attention: Paul Green , CFO of DPI Inc Parent of Newo Corp dba Amped Wir

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZTT-ALLYR1900
Name of Grantee:  Amped Wireless
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Whole Home Smart Wi-Fi Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.592  
38 CC MO 15E 5745.0  -  5825.0 0.989  

Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80MHz bandwidth modes.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Q40W3akKRB7lHWzgMJR+GA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Amped Wireless
13089 Peyton Dr. #C307
Chino Hills, CA 91709
United States
  Date of Grant: 11/03/2016

Application Dated: 11/02/2016
 
Attention: Paul Green , CFO of DPI Inc Parent of Newo Corp dba Amped Wir

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZTT-ALLYR1900
Name of Grantee:  Amped Wireless
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Whole Home Smart Wi-Fi Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.592  
38 CC MO 15E 5745.0  -  5825.0 0.989  

Power listed is maximum combined output power conducted. This device is restricted to indoor use only. Device operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 23 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20, 40, and 80MHz bandwidth modes.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: