FCC ID ZTT-AP20000G
High Power Wireless-N 600mW Gigabit Dual Band Access Point
by Amped Wireless
Grantee Code: ZTT Product Code: AP20000G
Latest application date: 2012-09-11
FCC ID Device Details
| FCC ID | ZTT-AP20000G |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | ZTT |
| Product Code | AP20000G |
| Applicant Business | Amped Wireless 🇺🇸 |
| Related Domains |  ampedwireless.com |
| Equipment Class | High Power Wireless-N 600mW Gigabit Dual Band Access Point |
| Test Firm | Cerpass Technology Corporation |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2012-09-11 |
| 5180-5240 MHz | Original Equipment | 2012-09-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Manual 0910 | Users Manual | 2012-09-11 | PDF 1.7 MB |
| Int | Internal Photos | 2012-09-11 | PDF 3.2 MB |
| Ext | External Photos | 2012-09-11 | PDF 135.7 KB |
| Label | ID Label/Location Info | 2012-09-11 | PDF 262.4 KB |
| Test Setup | Test Setup Photos | 2012-09-11 | PDF 553.4 KB |
| Test Report | Test Report | 2012-09-11 | PDF 5.1 MB |
| Test Report 1 | Test Report | 2012-09-11 | PDF 3.1 MB |
| Test Report 2 | Test Report | 2012-09-11 | PDF 4.3 MB |
| Authorization | Cover Letter(s) | 2012-09-11 | PDF 101.1 KB |
| Confid | Cover Letter(s) | 2012-09-11 | PDF 320.3 KB |
| DofC | Cover Letter(s) | 2012-09-11 | PDF 117.4 KB |
| RFx | RF Exposure Info | 2012-09-11 | PDF 74.9 KB |
| RFx 0910 | RF Exposure Info | 2012-09-11 | PDF 74.9 KB |
Application Information
| Application ID | uqzriHW11DAEUseuvrmTzg== |
|---|---|
| Final Action Date | 2012-09-11 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0021051008 |
| Model | -AP20000G |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | High Power Wireless-N 600mW Gigabit Dual Band Access Point |
| Responsible Party | Jason Owen, jason@ampedwireless.com , 9092173229 |
| Technical Contact | Mark Koop, Teleconformity, mark.koop@teleconformity.com  , (31)848395876 |
| Test Firm | Eric Chen, Cerpass Technology Corporation, ericc@cerpass.com.tw  , 886-2-2656-1688 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is maximum combined Conducted power operating in a 2X2 MIMO configuration. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| uqzriHW11DAEUseuvrmTzg== | 2012-09-11 | Original Equipment |
| ldJV03pQd5k0XBCkGnI7Hg== | 2012-09-11 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application uqzriHW11DAEUseuvrmTzg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 09/11/2012 Application Dated: 09/11/2012 |
| Amped Wireless |
| 13089 Peyton Dr. #C307 |
| Chino Hills, CA 91709 |
| Attention: Jason Owen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZTT-AP20000G |
| Name of Grantee: | Amped Wireless |
| Equipment Class: | Digital Transmission System |
| Notes: | High Power Wireless-N 600mW Gigabit Dual Band Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.3032 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.3034 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.4754 | ||
| CC | 15C | 5755.0 - 5795.0 | 0.4667 |
| Power Output listed is maximum combined Conducted power operating in a 2X2 MIMO configuration. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application uqzriHW11DAEUseuvrmTzg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Amped Wireless 13089 Peyton Dr. #C307 P.O. Box , Chino Hills, CA 91709 United States |
Date of Grant: 09/11/2012 Application Dated: 09/11/2012 |
| Attention: Jason Owen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZTT-AP20000G |
| Name of Grantee: | Amped Wireless |
| Equipment Class: | Digital Transmission System |
| Notes: | High Power Wireless-N 600mW Gigabit Dual Band Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.3032 | ||
| CC | 15C | 2422.0 - 2452.0 | 0.3034 | ||
| CC | 15C | 5745.0 - 5825.0 | 0.4754 | ||
| CC | 15C | 5755.0 - 5795.0 | 0.4667 |
| Power Output listed is maximum combined Conducted power operating in a 2X2 MIMO configuration. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 09/11/2012 Application Dated: 09/11/2012 |
| Amped Wireless |
| 13089 Peyton Dr. #C307 |
| Chino Hills, CA 91709 |
| Attention: Jason Owen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZTT-AP20000G |
| Name of Grantee: | Amped Wireless |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | High Power Wireless-N 600mW Gigabit Dual Band Access Point |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0113 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.0147 |
| Power Output listed is maximum combined Conducted power operating in a 3X3 MIMO configuration. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ldJV03pQd5k0XBCkGnI7Hg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Amped Wireless 13089 Peyton Dr. #C307 P.O. Box , Chino Hills, CA 91709 United States |
Date of Grant: 09/11/2012 Application Dated: 09/11/2012 |
| Attention: Jason Owen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZTT-AP20000G |
| Name of Grantee: | Amped Wireless |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | High Power Wireless-N 600mW Gigabit Dual Band Access Point |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0113 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.0147 |
| Power Output listed is maximum combined Conducted power operating in a 3X3 MIMO configuration. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be simultaneously operated in conjunction with any other antenna or transmitter. This transmitter is restricted to indoor use only within the 5.15-5.25 GHz band. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |