FCC ID ZTT-R20000G
High Power Wireless-N 600mW Gigabit Dual Band Router
by Amped Wireless
Grantee Code: ZTT Product Code: R20000G
Latest application date: 2012-08-01
FCC ID Device Details
| FCC ID | ZTT-R20000G |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | ZTT |
| Product Code | R20000G |
| Applicant Business | Amped Wireless 🇺🇸 |
| Related Domains |  ampedwireless.com |
| Equipment Class | High Power Wireless-N 600mW Gigabit Dual Band Router |
| Test Firm | Cerpass Technology Corporation |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2012-08-01 |
| 5180-5240 MHz | Original Equipment | 2012-07-31 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2012-08-01 | PDF 2.6 MB |
| Internal Photos | Internal Photos | 2012-08-01 | PDF 950 KB |
| External Photos | External Photos | 2012-08-01 | PDF 343 KB |
| FCC ID Label & Location | ID Label/Location Info | 2012-08-01 | PDF 107.5 KB |
| Test Setup Photos | Test Setup Photos | 2012-08-01 | PDF 553.4 KB |
| Test report for DTS-1 | Test Report | 2012-08-01 | PDF 4 MB |
| Test report for DTS-2 | Test Report | 2012-08-01 | PDF 5.1 MB |
| Test report for DTS-3 | Test Report | 2012-08-01 | PDF 5.2 MB |
| Test report for NII-1 | Test Report | 2012-08-01 | PDF 3.2 MB |
| Test report for NII-2 | Test Report | 2012-08-01 | PDF 3.3 MB |
| DOC | Cover Letter(s) | 2012-08-01 | PDF 28.3 KB |
| LTC request letter | Cover Letter(s) | 2012-08-01 | PDF 115.9 KB |
| POA | Cover Letter(s) | 2012-08-01 | PDF 25.2 KB |
| Antenna Specification | Parts List/Tune Up Info | 2012-08-01 | PDF 227.2 KB |
| RF Exposure Info | RF Exposure Info | 2012-08-01 | PDF 41.1 KB |
Application Information
| Application ID | StVy0Z85j+bqMVeyrn5Gew== |
|---|---|
| Final Action Date | 2012-08-01 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0021051008 |
| Model | -R20000G |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | High Power Wireless-N 600mW Gigabit Dual Band Router |
| Responsible Party | Jason Owen, jason@ampedwireless.com , 9092173229 |
| Test Firm | Ben Wang, Cerpass Technology Corporation, benwang@cerpass.com.tw  , 886-3-3226888 |
| TCB Email | bentje.holger@phoenix-testlab.de  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output Power listed is the maximum combined conducted peak output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz and 5755 to 5795 MHz respectively. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| StVy0Z85j+bqMVeyrn5Gew== | 2012-08-01 | Original Equipment |
| viJdW1GzWHor0joD/LucJA== | 2012-07-31 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application viJdW1GzWHor0joD/LucJA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 07/31/2012 Application Dated: 07/31/2012 |
| Amped Wireless |
| 13089 Peyton Dr. #C307 |
| Chino Hills, CA 91709 |
| Attention: Jason Owen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZTT-R20000G |
| Name of Grantee: | Amped Wireless |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | High Power Wireless-N 600mW Gigabit Dual Band Router |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0113 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.0147 |
| Output Power listed is the maximum combined conducted peak output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 5190 to 5230 MHz. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application viJdW1GzWHor0joD/LucJA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Amped Wireless 13089 Peyton Dr. #C307 P.O. Box , Chino Hills, CA 91709 United States |
Date of Grant: 07/31/2012 Application Dated: 07/31/2012 |
| Attention: Jason Owen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZTT-R20000G |
| Name of Grantee: | Amped Wireless |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | High Power Wireless-N 600mW Gigabit Dual Band Router |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0113 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.0147 |
| Output Power listed is the maximum combined conducted peak output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 5190 to 5230 MHz. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
PHOENIX TESTLAB GmbH Koenigswinkel 10 32825 Blomberg, Germany |
Date of Grant: 08/01/2012 Application Dated: 07/31/2012 |
| Amped Wireless |
| 13089 Peyton Dr. #C307 |
| Chino Hills, CA 91709 |
| Attention: Jason Owen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZTT-R20000G |
| Name of Grantee: | Amped Wireless |
| Equipment Class: | Digital Transmission System |
| Notes: | High Power Wireless-N 600mW Gigabit Dual Band Router |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.3034 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.3034 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.4754 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.4667 |
| Output Power listed is the maximum combined conducted peak output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz and 5755 to 5795 MHz respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application StVy0Z85j+bqMVeyrn5Gew==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Amped Wireless 13089 Peyton Dr. #C307 P.O. Box , Chino Hills, CA 91709 United States |
Date of Grant: 08/01/2012 Application Dated: 07/31/2012 |
| Attention: Jason Owen |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZTT-R20000G |
| Name of Grantee: | Amped Wireless |
| Equipment Class: | Digital Transmission System |
| Notes: | High Power Wireless-N 600mW Gigabit Dual Band Router |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.3034 | ||
| CC MO | 15C | 2422.0 - 2452.0 | 0.3034 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.4754 | ||
| CC MO | 15C | 5755.0 - 5795.0 | 0.4667 |
| Output Power listed is the maximum combined conducted peak output power as indicated in the filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz and 5755 to 5795 MHz respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |