FCC ID ZTT-RE2600M

High Power AC2600 Wi-Fi Range Extender with MU-MIMO

by Amped Wireless

Grantee Code: ZTT   Product Code: RE2600M
Latest application date: 2016-04-08

Device Images

FCC ID Device Details

FCC IDZTT-RE2600M
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeZTT
Product CodeRE2600M
Applicant BusinessAmped Wireless 🇺🇸
Related Domains dpiinc.com sporton.com.tw
Equipment ClassHigh Power AC2600 Wi-Fi Range Extender with MU-MIMO
Test FirmSPORTON International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2016-04-08
2412-2462 MHzOriginal Equipment2016-04-08

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2016-04-08PDF 4.7 MB
Internal PhotosInternal Photos2016-04-08PDF 1.7 MB
External PhotosExternal Photos2016-04-08PDF 1,003.3 KB
ID Label/Location InfoID Label/Location Info2016-04-08PDF 2 MB
Software Security letterOperational Description2016-04-08PDF 49.3 KB
Test Setup PhotosTest Setup Photos2016-04-08PDF 338.9 KB
Radiated Emission Co-location ReportTest Report2016-04-08PDF 135.6 KB
Test ReportTest Report2016-04-08PDF 4.5 MB
Test ReportTest Report2016-04-08PDF 3 MB
ConfidentialityCover Letter(s)2016-04-08PDF 133 KB
DOC LetterCover Letter(s)2016-04-08PDF 115.1 KB
POACover Letter(s)2016-04-08PDF 126.5 KB
RF Exposure InfoRF Exposure Info2016-04-08PDF 366.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 50.7 KB
Schematics Metadata onlySchematicsPDF 1.6 MB
Operational Description Metadata onlyOperational DescriptionPDF 198.2 KB

Application Information

Application IDFdPmCR0NtfxqzedlxTmsEA==
Final Action Date2016-04-08
Application PurposeOriginal Equipment
Applicant FRN0021051008
ModelRE2600M
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionHigh Power AC2600 Wi-Fi Range Extender with MU-MIMO
Responsible PartyPaul Green, CFO of DPI Inc Parent of Newo Corp dba Amped Wirel, pgreen@dpiinc.com , 3146572330
AgentLeo Leo Leo, Sporton International Inc., christyfan@sporton.com.tw , 886-3-656-9065
Technical ContactChristy Fan, Sporton International Inc., christyfan@sporton.com.tw , 886-3-656-9065
Non-Technical ContactChristy Fan, Sporton International Inc., christyfan@sporton.com.tw , 886-3-656-9065
Test FirmSharon Jiang, SPORTON International Inc., sharonjiang@sporton.com.tw , 886-3-656-9065
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz, and 5775 MHz. Operations in 5150-5250 MHz band is for indoor use only.

Applications

Application IDDatePurpose
FdPmCR0NtfxqzedlxTmsEA==2016-04-08Original Equipment
52rp6Bs0c841klesOXGjwQ==2016-04-08Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.530000015CCC, MO
5180-5240 MHz0.628115E38, CC, MO
5745-5825 MHz0.49715E38, CC, MO

Grants

TCB Grant - Application FdPmCR0NtfxqzedlxTmsEA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 04/08/2016

Application Dated: 04/08/2016
Amped Wireless
13089 Peyton Dr. #C307
Chino Hills, CA 91709
 
Attention: Paul Green , CFO of DPI Inc Parent of Newo Corp dba Amped Wir

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZTT-RE2600M
Name of Grantee:  Amped Wireless
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: High Power AC2600 Wi-Fi Range Extender with MU-MIMO
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.6281  
38 CC MO 15E 5745.0  -  5825.0 0.497  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz, and 5775 MHz. Operations in 5150-5250 MHz band is for indoor use only.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application FdPmCR0NtfxqzedlxTmsEA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Amped Wireless
13089 Peyton Dr. #C307
Chino Hills, CA 91709
United States
  Date of Grant: 04/08/2016

Application Dated: 04/08/2016
 
Attention: Paul Green , CFO of DPI Inc Parent of Newo Corp dba Amped Wir

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZTT-RE2600M
Name of Grantee:  Amped Wireless
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: High Power AC2600 Wi-Fi Range Extender with MU-MIMO
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.6281  
38 CC MO 15E 5745.0  -  5825.0 0.497  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40/80 MHz bandwidth modes. The 80 MHz mode is limited to channel at 5210MHz, and 5775 MHz. Operations in 5150-5250 MHz band is for indoor use only.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 52rp6Bs0c841klesOXGjwQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 04/08/2016

Application Dated: 04/08/2016
Amped Wireless
13089 Peyton Dr. #C307
Chino Hills, CA 91709
 
Attention: Paul Green , CFO of DPI Inc Parent of Newo Corp dba Amped Wir

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZTT-RE2600M
Name of Grantee:  Amped Wireless
Equipment Class: Digital Transmission System
Notes: High Power AC2600 Wi-Fi Range Extender with MU-MIMO
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.53  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 52rp6Bs0c841klesOXGjwQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Amped Wireless
13089 Peyton Dr. #C307
Chino Hills, CA 91709
United States
  Date of Grant: 04/08/2016

Application Dated: 04/08/2016
 
Attention: Paul Green , CFO of DPI Inc Parent of Newo Corp dba Amped Wir

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZTT-RE2600M
Name of Grantee:  Amped Wireless
Equipment Class: Digital Transmission System
Notes: High Power AC2600 Wi-Fi Range Extender with MU-MIMO
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.53  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: