FCC ID ZTT-RTA1200

High Power AC1200 Wi-Fi Router

by Amped Wireless

Grantee Code: ZTT   Product Code: RTA1200
Latest application date: 2015-04-21

FCC ID Device Details

FCC IDZTT-RTA1200
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeZTT
Product CodeRTA1200
Applicant BusinessAmped Wireless 🇺🇸
Related Domains dpiinc.com icertifi.com.tw
Equipment ClassHigh Power AC1200 Wi-Fi Router
Test FirmInternational Certification Corp.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2015-04-21
5180-5240 MHzOriginal Equipment2015-04-21

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2015-04-21PDF 1.7 MB
Internal photoInternal Photos2015-04-21PDF 854.9 KB
External photoExternal Photos2015-04-21PDF 960 KB
ID label/Location infoID Label/Location Info2015-04-21PDF 760.3 KB
Test setup photoTest Setup Photos2015-04-21PDF 512.5 KB
Test report-15.247Test Report2015-04-21PDF 3.6 MB
Test report-15.407Test Report2015-04-21PDF 1.6 MB
Test report-Co-locatedTest Report2015-04-21PDF 528.8 KB
Ad hoc declarationCover Letter(s)2015-04-21PDF 60.3 KB
DoCCover Letter(s)2015-04-21PDF 48.4 KB
POACover Letter(s)2015-04-21PDF 75.4 KB
confidentialityCover Letter(s)2015-04-21PDF 74.9 KB
RF ExposureRF Exposure Info2015-04-21PDF 216.8 KB
Block diagram Metadata onlyBlock DiagramPDF 12.8 KB
Schematics Metadata onlySchematicsPDF 306.7 KB
Operational description Metadata onlyOperational DescriptionPDF 164.3 KB
SW Security for UNII Metadata onlyOperational DescriptionPDF 77.9 KB

Application Information

Application ID7B/3bVxp2eplu8b6HbJHQQ==
Final Action Date2015-04-21
Application PurposeOriginal Equipment
Applicant FRN0021051008
ModelRTA1200
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionHigh Power AC1200 Wi-Fi Router
Responsible PartyPaul Green, CFO of DPI Inc Parent of Newo Corp dba Amped Wirel, pgreen@dpiinc.com , 3146572330
AgentGary Gary Gary, International Certification Corp., GaryChang@icertifi.com.tw , 886-3-271-8628
Technical ContactGary Chang, International Certification Corp., GaryChang@icertifi.com.tw , 886-3-271-8628
Non-Technical ContactWendy Liao, International Certification Corp., wendyLiao@icertifi.com.tw , 886-3-271-8629
Test FirmFu-Cheng Chuang, International Certification Corp., Jeff@icertifi.com.tw , 886-3-271-8666
TCB Emailcertification@telefication.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth modes.

Applications

Application IDDatePurpose
7B/3bVxp2eplu8b6HbJHQQ==2015-04-21Original Equipment
5SOcBa/c+B2QYgDO6rpkMw==2015-04-21Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.952000015CCC, MO
5180-5240 MHz0.17915E38, CC, MO
5745-5825 MHz0.10515E38, CC, MO

Grants

TCB Grant - Application 7B/3bVxp2eplu8b6HbJHQQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 04/21/2015

Application Dated: 04/20/2015
Amped Wireless
13089 Peyton Dr. #C307
Chino Hills, CA 91709
 
Attention: Paul Green , CFO of DPI Inc Parent of Newo Corp dba Amped Wir

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZTT-RTA1200
Name of Grantee:  Amped Wireless
Equipment Class: Digital Transmission System
Notes: High Power AC1200 Wi-Fi Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.952  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 7B/3bVxp2eplu8b6HbJHQQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Amped Wireless
13089 Peyton Dr. #C307
Chino Hills, CA 91709
United States
  Date of Grant: 04/21/2015

Application Dated: 04/20/2015
 
Attention: Paul Green , CFO of DPI Inc Parent of Newo Corp dba Amped Wir

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZTT-RTA1200
Name of Grantee:  Amped Wireless
Equipment Class: Digital Transmission System
Notes: High Power AC1200 Wi-Fi Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.952  

Output power listed is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 5SOcBa/c+B2QYgDO6rpkMw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Telefication B.V.
Wilmersdorf 50
Apeldoorn, NL-7300 AC
Netherlands
Date of Grant: 04/21/2015

Application Dated: 04/20/2015
Amped Wireless
13089 Peyton Dr. #C307
Chino Hills, CA 91709
 
Attention: Paul Green , CFO of DPI Inc Parent of Newo Corp dba Amped Wir

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZTT-RTA1200
Name of Grantee:  Amped Wireless
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: High Power AC1200 Wi-Fi Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.179  
38 CC MO 15E 5745.0  -  5825.0 0.105  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40/80 MHz bandwidth modes.

The 80 MHz mode is limited to channel at 5210MHz and 5775 MHz.

Operations in 5150-5250 MHz band is for indoor use only.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 5SOcBa/c+B2QYgDO6rpkMw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Amped Wireless
13089 Peyton Dr. #C307
Chino Hills, CA 91709
United States
  Date of Grant: 04/21/2015

Application Dated: 04/20/2015
 
Attention: Paul Green , CFO of DPI Inc Parent of Newo Corp dba Amped Wir

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZTT-RTA1200
Name of Grantee:  Amped Wireless
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: High Power AC1200 Wi-Fi Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.179  
38 CC MO 15E 5745.0  -  5825.0 0.105  

Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20/40/80 MHz bandwidth modes.

The 80 MHz mode is limited to channel at 5210MHz and 5775 MHz.

Operations in 5150-5250 MHz band is for indoor use only.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: