FCC ID ZTT-RTA2600

High Power AC2600 Wi-Fi Router

by Amped Wireless

Grantee Code: ZTT   Product Code: RTA2600
Latest application date: 2015-06-24

FCC ID Device Details

FCC IDZTT-RTA2600
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeZTT
Product CodeRTA2600
Applicant BusinessAmped Wireless 🇺🇸
Related Domains dpiinc.com
Equipment ClassHigh Power AC2600 Wi-Fi Router
Test FirmSporton International Inc.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2015-06-24
2412-2462 MHzOriginal Equipment2015-06-24

Exhibits

DocumentTypeAvailableFile
user manualUsers Manual2015-06-24PDF 3.5 MB
user manualTest Report2015-06-24PDF 3.5 MB
int photosInternal Photos2015-06-24PDF 1.1 MB
ext photosExternal Photos2015-06-24PDF 460.5 KB
LabelID Label/Location Info2015-06-24PDF 512.4 KB
LabelID Label/Location Info2015-06-24PDF 59.9 KB
Test Setup photosTest Setup Photos2015-06-24PDF 294.4 KB
UNII letterTest Setup Photos2015-06-24PDF 40.6 KB
Colocation reportTest Report2015-06-24PDF 276.5 KB
Test reportTest Report2015-06-24PDF 1.3 MB
LTC requestCover Letter(s)2015-06-24PDF 151.8 KB
PoACover Letter(s)2015-06-24PDF 164.1 KB
MPERF Exposure Info2015-06-24PDF 59.9 KB
block diagram Metadata onlyBlock DiagramPDF 58.8 KB
schematics Metadata onlySchematicsPDF 967.5 KB
operational description Metadata onlyOperational DescriptionPDF 28.4 KB
operational description SW securtity Metadata onlyOperational DescriptionPDF 32 KB
operational description software security Metadata onlyOperational DescriptionPDF 32 KB

Application Information

Application IDm6XZrZGW7bsjVsK2iNuSOw==
Final Action Date2015-06-24
Application PurposeOriginal Equipment
Applicant FRN0021051008
ModelRTA2600
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionHigh Power AC2600 Wi-Fi Router
Responsible PartyPaul Green, CFO of DPI Inc Parent of Newo Corp dba Amped Wirel, pgreen@dpiinc.com , 3146572330
AgentKevin Kevin Kevin, Sporton Int Inc, KevinLiang@sporton.com.tw , 88633273456
Test FirmAlex Chen, Sporton International Inc., alex@sporton.com.tw , 886-3-327-3456
TCB EmailBrandhorst.dirk@phoenix-testlab.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is the maximum combined conducted output power as indicated in the filing. This device with its antenna(s) must be installed and used in fixed/portable operating conditions and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter policy. End-users and installers must be provided the transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 4T4R Spatial Multiplexing MIMO configuration as described in this filing. Operation of this device is restricted to indoor use only. This device has 20, 40 and 80 MHz BW modes.

Applications

Application IDDatePurpose
m6XZrZGW7bsjVsK2iNuSOw==2015-06-24Original Equipment
PubtlGfOPMG00rx80Z8h+Q==2015-06-24Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.998000015CCC, MO
5180-5240 MHz0.21515ECC, MO
5745-5825 MHz0.32615ECC, MO

Grants

TCB Grant - Application PubtlGfOPMG00rx80Z8h+Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 06/24/2015

Application Dated: 06/24/2015
Amped Wireless
13089 Peyton Dr. #C307
Chino Hills, CA 91709
 
Attention: Paul Green , CFO of DPI Inc Parent of Newo Corp dba Amped Wir

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZTT-RTA2600
Name of Grantee:  Amped Wireless
Equipment Class: Digital Transmission System
Notes: High Power AC2600 Wi-Fi Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.998  

Output Power listed is the maximum combined conducted peak output power as indicated in the filing. This device with its antenna(s) must be installed and used in fixed/portable operating conditions and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter policy. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 4T4R Spatial Multiplexing MIMO configuration as described in this filing. Operation of this device is restricted to indoor use only. This device has 20 and 40 MHz BW modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application PubtlGfOPMG00rx80Z8h+Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Amped Wireless
13089 Peyton Dr. #C307
Chino Hills, CA 91709
United States
  Date of Grant: 06/24/2015

Application Dated: 06/24/2015
 
Attention: Paul Green , CFO of DPI Inc Parent of Newo Corp dba Amped Wir

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZTT-RTA2600
Name of Grantee:  Amped Wireless
Equipment Class: Digital Transmission System
Notes: High Power AC2600 Wi-Fi Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.998  

Output Power listed is the maximum combined conducted peak output power as indicated in the filing. This device with its antenna(s) must be installed and used in fixed/portable operating conditions and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter policy. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 4T4R Spatial Multiplexing MIMO configuration as described in this filing. Operation of this device is restricted to indoor use only. This device has 20 and 40 MHz BW modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application m6XZrZGW7bsjVsK2iNuSOw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 06/24/2015

Application Dated: 06/24/2015
Amped Wireless
13089 Peyton Dr. #C307
Chino Hills, CA 91709
 
Attention: Paul Green , CFO of DPI Inc Parent of Newo Corp dba Amped Wir

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZTT-RTA2600
Name of Grantee:  Amped Wireless
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: High Power AC2600 Wi-Fi Router
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.215  
CC MO 15E 5745.0  -  5825.0 0.326  

Output Power listed is the maximum combined conducted output power as indicated in the filing. This device with its antenna(s) must be installed and used in fixed/portable operating conditions and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter policy. End-users and installers must be provided the transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 4T4R Spatial Multiplexing MIMO configuration as described in this filing. Operation of this device is restricted to indoor use only. This device has 20, 40 and 80 MHz BW modes.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application m6XZrZGW7bsjVsK2iNuSOw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Amped Wireless
13089 Peyton Dr. #C307
Chino Hills, CA 91709
United States
  Date of Grant: 06/24/2015

Application Dated: 06/24/2015
 
Attention: Paul Green , CFO of DPI Inc Parent of Newo Corp dba Amped Wir

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZTT-RTA2600
Name of Grantee:  Amped Wireless
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: High Power AC2600 Wi-Fi Router
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.215  
CC MO 15E 5745.0  -  5825.0 0.326  

Output Power listed is the maximum combined conducted output power as indicated in the filing. This device with its antenna(s) must be installed and used in fixed/portable operating conditions and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with the FCC multi-transmitter policy. End-users and installers must be provided the transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 4T4R Spatial Multiplexing MIMO configuration as described in this filing. Operation of this device is restricted to indoor use only. This device has 20, 40 and 80 MHz BW modes.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: