FCC ID ZTT-UA2000

High Power Wireless-N Dual Band Directional USB Adapter

by Amped Wireless

Grantee Code: ZTT   Product Code: UA2000
Latest application date: 2012-07-31

FCC ID Device Details

FCC IDZTT-UA2000
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeZTT
Product CodeUA2000
Applicant BusinessAmped Wireless 🇺🇸
Related Domains ampedwireless.com
Equipment ClassHigh Power Wireless-N Dual Band Directional USB Adapter
Test FirmCerpass Technology Corporation

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2012-07-31
5180-5240 MHzOriginal Equipment2012-07-31

Exhibits

DocumentTypeAvailableFile
user manualUsers Manual2012-07-31PDF 2.1 MB
internal photoInternal Photos2012-07-31PDF 718.5 KB
external photoExternal Photos2012-07-31PDF 499.3 KB
label infoID Label/Location Info2012-07-31PDF 391.5 KB
test setup photoTest Setup Photos2012-07-31PDF 444.3 KB
DTS part 1Test Report2012-07-31PDF 5.5 MB
DTS part 2Test Report2012-07-31PDF 5.3 MB
DTS part 3Test Report2012-07-31PDF 2.7 MB
NII part 1Test Report2012-07-31PDF 4.6 MB
NII part 2Test Report2012-07-31PDF 1.3 MB
15B DoC letterAttestation Statements2012-07-31PDF 27.5 KB
Confidential letterCover Letter(s)2012-07-31PDF 103.6 KB
POACover Letter(s)2012-07-31PDF 21.2 KB
confidential request letterCover Letter(s)2012-07-31PDF 103.6 KB
MPERF Exposure Info2012-07-31PDF 31.8 KB
antenna specParts List/Tune Up Info2012-07-31PDF 195.8 KB

Application Information

Application IDgZPvKHfR4bC/dLrRpJg3bw==
Final Action Date2012-07-31
Application PurposeOriginal Equipment
Applicant FRN0021051008
Model-UA2000
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionHigh Power Wireless-N Dual Band Directional USB Adapter
Responsible PartyJason Owen, jason@ampedwireless.com , 9092173229
Test FirmHill Chen, Cerpass Technology Corporation, hillc@cerpass.com.tw , 886-2-2655-8100
TCB Emailbentje.holger@phoenix-testlab.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz and 5755 to 5795 MHz.

Applications

Application IDDatePurpose
gZPvKHfR4bC/dLrRpJg3bw==2012-07-31Original Equipment
1PP8DjEMnxMBTC3TS/d9Lw==2012-07-31Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.38615CCC, MO
2422-2452 MHz0.38615CCC, MO
5180-5240 MHz0.01615ECC, MO
5190-5230 MHz0.01715ECC, MO
5745-5825 MHz0.19915CCC, MO
5755-5795 MHz0.18515CCC, MO

Grants

TCB Grant - Application gZPvKHfR4bC/dLrRpJg3bw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 07/31/2012

Application Dated: 07/31/2012
Amped Wireless
13089 Peyton Dr. #C307
Chino Hills, CA 91709
 
Attention: Jason Owen

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZTT-UA2000
Name of Grantee:  Amped Wireless
Equipment Class: Digital Transmission System
Notes: High Power Wireless-N Dual Band Directional USB Adapter
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.386  
CC MO 15C 2422.0  -  2452.0 0.386  
CC MO 15C 5745.0  -  5825.0 0.199  
CC MO 15C 5755.0  -  5795.0 0.185  

Output Power listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz and 5755 to 5795 MHz.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application gZPvKHfR4bC/dLrRpJg3bw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Amped Wireless
13089 Peyton Dr. #C307 P.O. Box ,
Chino Hills, CA 91709
United States
  Date of Grant: 07/31/2012

Application Dated: 07/31/2012
 
Attention: Jason Owen

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZTT-UA2000
Name of Grantee:  Amped Wireless
Equipment Class: Digital Transmission System
Notes: High Power Wireless-N Dual Band Directional USB Adapter
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.386  
CC MO 15C 2422.0  -  2452.0 0.386  
CC MO 15C 5745.0  -  5825.0 0.199  
CC MO 15C 5755.0  -  5795.0 0.185  

Output Power listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 2422 to 2452 MHz and 5755 to 5795 MHz.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 1PP8DjEMnxMBTC3TS/d9Lw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 07/31/2012

Application Dated: 07/31/2012
Amped Wireless
13089 Peyton Dr. #C307
Chino Hills, CA 91709
 
Attention: Jason Owen

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZTT-UA2000
Name of Grantee:  Amped Wireless
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: High Power Wireless-N Dual Band Directional USB Adapter
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.016  
CC MO 15E 5190.0  -  5230.0 0.017  

Output Power listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 5190 to 5230 MHz

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 1PP8DjEMnxMBTC3TS/d9Lw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Amped Wireless
13089 Peyton Dr. #C307 P.O. Box ,
Chino Hills, CA 91709
United States
  Date of Grant: 07/31/2012

Application Dated: 07/31/2012
 
Attention: Jason Owen

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  ZTT-UA2000
Name of Grantee:  Amped Wireless
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: High Power Wireless-N Dual Band Directional USB Adapter
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.016  
CC MO 15E 5190.0  -  5230.0 0.017  

Output Power listed is peak conducted. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device is operating in a 2T2R Spatial Multiplexing MIMO configuration as described in this filing. Operating of this device in the 5150 MHz to 5250 MHz range is restricted to indoor use only. When operating in 802.11n, 40 MHz mode, the operating frequency segment is limited to 5190 to 5230 MHz


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: