FCC ID ZUQ-H-FEM-L-S8

FCC ID ZUQ-H-FEM-L-S8 ID-Label-Location-Info, ZUQ HFEMLS8, ZUQ-H-FEM-L-S8, ZUQ-H-FEM-L-58, ZUO-H-FEM-L-S8, ZU0-H-FEM-L-S8

KMW U.S.A., INC. DAS Head-End H-FEM-L-S8

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: ZUQ-H-FEM-L-S8 is ZUQ. The remaining characters of the FCC ID, -H-FEM-L-S8, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: DAS Head-End

FCC ID ZUQ-H-FEM-L-S8 ID-Label-Location-Info

*Please Check Individual Documents for more images

Application: DAS Head-End
Equipment Class: B2I - Part 20 Industrial Booster (CMRS)
Short Link: fcc.id/ZUQ-H-FEM-L-S8
Sources: FCC.gov | FCC.report
Registered By: KMW U.S.A., INC. - ZUQ (United States)

App #	Purpose	Date	Unique ID
1	Original Equipment	2016-09-08	B9DNc7Ng7VO+8PMWHNzR+A==

Operating Frequencies

Colombia Homologation [?]: ZUQ-H-FEM-L-S8

Frequency Range	Power Output	Tolerance	Emission Designator	Rule Parts	Line Entry
817-824 MHz	0.322 mW	Amp	G7W	90S	1
817-824 MHz	0.322 mW	Amp	F9W	90S	2

Exhibits

Document	Type	Submitted Available
POD-H-FEM-L-S8_SMR800_Test Report_Rev.1	Test Report Adobe Acrobat PDF (5087 kB)	2016-09-08 2016-09-08
POD-H-FEM-L-S8(SMR800)_SET UP PHOTO	Test Setup Photos Adobe Acrobat PDF (438 kB)	2016-09-08 2017-03-07
POD User Manual_v0.7	Users Manual Adobe Acrobat PDF (4974 kB)	2016-09-08 2017-03-07
HE_External_Internal Photos	Internal Photos Adobe Acrobat PDF (3127 kB)	2016-09-08 2017-03-07
HE_External_Internal Photos	External Photos Adobe Acrobat PDF (3127 kB)	2016-09-08 2017-03-07
KMW_Authorization Ltr & Power of Attorney_Rev.1	Cover Letter(s) Adobe Acrobat PDF (63 kB)	2016-09-08 2016-09-08
HE-S8_FCC_Label	ID Label/Location Info Adobe Acrobat PDF (287 kB)	2016-09-08 2016-09-08
HE-S8_Confidentiality letter	Cover Letter(s) Adobe Acrobat PDF (187 kB)	2016-09-08 2016-09-08
HE-S8_Attestation letter for Warning message_Part20	Cover Letter(s) Adobe Acrobat PDF (98 kB)	2016-09-08 2016-09-08
HE_Tune-up Procedure v0.1	Parts List/Tune Up Info Adobe Acrobat PDF (600 kB)	2016-09-08
HE-S8_Block Diagram	Block Diagram Adobe Acrobat PDF (562 kB)	2016-09-08
HE-S8_Schematic	Schematics Adobe Acrobat PDF (1000 kB)	2016-09-08
HE_Operational Description v0.1_Rev.1	Operational Description Adobe Acrobat PDF (569 kB)	2016-09-08
HE-S8_Part list	Parts List/Tune Up Info Adobe Acrobat PDF (322 kB)	2016-09-08

Application Forms

Application for Equipment Authorization FCC Form 731 TCB Version

Applicant Information

Applicant's complete, legal business name:	KMW U.S.A., INC.
FCC Registration Number (FRN):	0021062609
Alphanumeric FCC ID:	ZUQHFEMLS8
Unique Application Identifier:	B9DNc7Ng7VO+8PMWHNzR+A==
Line one:	1818 E. Orangethorpe Ave.
City:	Fullerton
State:	California
Country:	United States
Zip Code:	92831

TCB Information

TCB Application Email Address:	tcb@hctamerica.com
TCB Scope:	B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 & 27

FCC ID

Grantee Code:	ZUQ
Product Code:	-H-FEM-L-S8

Person at the applicant's address to receive grant or for contact

Name:

JINHEE LEE

Telephone Number:

7145151465

Extension:

Fax Number:	7145151134
Email:	jhlee@kmwcomm.com

Long-Term Confidentiality

Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes

Short-Term Confidentiality

Does short-term confidentiality apply to this application?: Yes

If so, specify the short-term confidentiality release date (MM/DD/YYYY format): 03/07/2017
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio

Is this application for software defined/cognitive radio authorization? No

Equipment Class

Equipment Class: B2I - Part 20 Industrial Booster (CMRS)
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant):	DAS Head-End

Related OET KnowledgeDataBase Inquiry

Is there a KDB inquiry associated with this application? No

Modular Equipment

Modular Type: Does not apply

Application Purpose

Application is for: Original Equipment

Composite/Related Equipment

Is the equipment in this application a composite device subject to an additional equipment authorization? No

Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? Yes

Test Firm Information

Name of test firm and contact person on file with the FCC:

Firm Name: HCT Co., LTD

First Name: Sang

Last Name: Lee

Telephone Number:

82-31-645-6420

Extension:

Fax Number: 82-31-645-6401

E-mail: sjlee@HCT.co.kr

Grant Comments

Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Output power is conducted. Device supports CDMA, LTE 5MHz and 10MHz. This transmitter operates as a remote unit as part of a system along with base station interface unit as described in this filing, and excluding any other devices connected to the (uplink) transmit output terminal of the base station interface unit. This application covers only the system configuration with base interface unit connected to a base station RF port in the uplink transmit path; operations of this remote unit if any in a system with base interface unit connected to antenna or amplifier for uplink transmissions require separate equipment authorization. This device is authorized to operate only as part of a distributed-antenna booster system installed in buildings. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of Sec. 1.1307(b)(3), for satisfying RF exposure compliance. RF exposure will be addressed at time of installation and the use of higher gain antennas may require larger separation distances. This device is part of a booster system operated with FCC ID: ZUQR7S8CPAWB-2730.

Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver

Is there an equipment authorization waiver associated with this application? No

If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?: No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify? Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing: SunHee Kim

Title of authorized signature: Agent

Grants

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

HCT America LLC
44364 S. Grimmer Blvd.
Fremont, CA 94538

Date of Grant: 09/08/2016

Application Dated: 09/08/2016

KMW U.S.A., INC.

1818 E. Orangethorpe Ave.

Fullerton, CA 92831

Attention: JINHEE LEE

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	ZUQ-H-FEM-L-S8

Name of Grantee:	KMW U.S.A., INC.

Equipment Class:	Part 20 Industrial Booster (CMRS)
Notes:	DAS Head-End

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	90S	817.0 - 824.0	0.000322	Amp	G7W
	90S	817.0 - 824.0	0.000322	Amp	F9W

Output power is conducted. Device supports CDMA, LTE 5MHz and 10MHz. This transmitter operates as a remote unit as part of a system along with base station interface unit as described in this filing, and excluding any other devices connected to the (uplink) transmit output terminal of the base station interface unit. This application covers only the system configuration with base interface unit connected to a base station RF port in the uplink transmit path; operations of this remote unit if any in a system with base interface unit connected to antenna or amplifier for uplink transmissions require separate equipment authorization. This device is authorized to operate only as part of a distributed-antenna booster system installed in buildings. This filing has compliance demonstration information and test data only for SISO (single-input single-output) booster system configurations; additional equipment authorization is required to allow this device to be used in MIMO (multiple-input multiple-output) industrial booster systems. Users and installers must be provided with appropriate antenna installation instructions and transmitter operating conditions, including antenna co-location requirements of Sec. 1.1307(b)(3), for satisfying RF exposure compliance. RF exposure will be addressed at time of installation and the use of higher gain antennas may require larger separation distances. This device is part of a booster system operated with FCC ID: ZUQR7S8CPAWB-2730.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

KMW U.S.A., INC.
1818 E. Orangethorpe Ave.
Fullerton, CA 92831
United States