FCC ID ZVA10
WIFI+BT Audio Module
by Tonly Technology Co., Ltd.
Grantee Code: ZVA Product Code: 10
Latest application date: 2018-05-22
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2018-05-22 |
| 2402-2480 MHz | Original Equipment | 2018-05-22 |
| 5180-5240 MHz | Original Equipment | 2018-05-22 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2018-05-22 | PDF 853.5 KB |
| Internal photos | Internal Photos | 2018-05-22 | PDF 1.7 MB |
| External photos | External Photos | 2018-05-22 | PDF 964.7 KB |
| Label and label location | ID Label/Location Info | 2018-05-22 | PDF 1.1 MB |
| Test setup photos | Test Setup Photos | 2018-05-22 | PDF 1.1 MB |
| Test setup photos dfs | Test Setup Photos | 2018-05-22 | PDF 334.4 KB |
| Test Report 2G4WLAN part 1 | Test Report | 2018-05-22 | PDF 4.8 MB |
| Test Report 2G4WLAN part 2 | Test Report | 2018-05-22 | PDF 1.5 MB |
| Test Report 5GWLAN part 1 | Test Report | 2018-05-22 | PDF 4.9 MB |
| Test Report 5GWLAN part 2 | Test Report | 2018-05-22 | PDF 4.3 MB |
| Test Report BT Classics | Test Report | 2018-05-22 | PDF 5.5 MB |
| Test Report BT LE | Test Report | 2018-05-22 | PDF 2.9 MB |
| Test Report DFS | Test Report | 2018-05-22 | PDF 2.1 MB |
| Authorization letter of application | Cover Letter(s) | 2018-05-22 | PDF 99.6 KB |
| Confidentiality request letter | Cover Letter(s) | 2018-05-22 | PDF 80.6 KB |
| Modular approval request | Cover Letter(s) | 2018-05-22 | PDF 164.4 KB |
| RF exposure evaluation | RF Exposure Info | 2018-05-22 | PDF 247.8 KB |
| Block diagram Metadata only | Block Diagram | PDF 123.5 KB | |
| Schematic Metadata only | Schematics | PDF 705.1 KB | |
| Letter of declaration software security Metadata only | Operational Description | PDF 87.8 KB | |
| Letter of declaration unii device Metadata only | Operational Description | PDF 26.1 KB | |
| Operation description Metadata only | Operational Description | PDF 91.8 KB |
Application Information
| Application ID | gfh4JqX89B2y/L1VVHf/bA== |
|---|---|
| Final Action Date | 2018-05-22 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0020517298 |
| Model | 10 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | WIFI+BT Audio Module |
| Responsible Party | Hao Wang, Compliance Director, wanghao01@tcl.com  , 86-13510292544 |
| Test Firm | Sophia Huang, BTL Inc., sophia.huang@newbtl.com  , 86-769-83183000 |
| TCB Email | tcb-essen@cetecom.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output Power listed is the peak conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| gfh4JqX89B2y/L1VVHf/bA== | 2018-05-22 | Original Equipment |
| e+gPzcuqJDvS3Z2cPqP0Dw== | 2018-05-22 | Original Equipment |
| bf17QHwgCqAKmo5ApKAfpg== | 2018-05-22 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application gfh4JqX89B2y/L1VVHf/bA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM GmbH Im Teelbruch 116 45219 Essen, Germany |
Date of Grant: 05/22/2018 Application Dated: 05/22/2018 |
| Tonly Technology Co., Ltd. |
| Section 37, Zhongkai High-tech development Zone |
| Huizhou, Guangdong, 516006 China |
| Attention: Hao Wang , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZVA10 |
| Name of Grantee: | Tonly Technology Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WIFI+BT Audio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0059 |
| Output Power listed is the peak conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application gfh4JqX89B2y/L1VVHf/bA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tonly Technology Co., Ltd. Section 37, Zhongkai High-tech development Zone Huizhou, Guangdong, 516006 China |
Date of Grant: 05/22/2018 Application Dated: 05/22/2018 |
| Attention: Hao Wang , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZVA10 |
| Name of Grantee: | Tonly Technology Co., Ltd. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WIFI+BT Audio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0059 |
| Output Power listed is the peak conducted. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM GmbH Im Teelbruch 116 45219 Essen, Germany |
Date of Grant: 05/22/2018 Application Dated: 05/22/2018 |
| Tonly Technology Co., Ltd. |
| Section 37, Zhongkai High-tech development Zone |
| Huizhou, Guangdong, 516006 China |
| Attention: Hao Wang , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZVA10 |
| Name of Grantee: | Tonly Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | WIFI+BT Audio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0023 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.2871 |
| Output Power listed is the peak conducted. Single Modular Approval for mobile RF Exposure condition. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application e+gPzcuqJDvS3Z2cPqP0Dw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tonly Technology Co., Ltd. Section 37, Zhongkai High-tech development Zone Huizhou, Guangdong, 516006 China |
Date of Grant: 05/22/2018 Application Dated: 05/22/2018 |
| Attention: Hao Wang , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZVA10 |
| Name of Grantee: | Tonly Technology Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | WIFI+BT Audio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0023 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.2871 |
| Output Power listed is the peak conducted. Single Modular Approval for mobile RF Exposure condition. This device supports 802.11b, 802.11g and 802.11n with a 20 MHz and 40 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CETECOM GmbH Im Teelbruch 116 45219 Essen, Germany |
Date of Grant: 05/22/2018 Application Dated: 05/22/2018 |
| Tonly Technology Co., Ltd. |
| Section 37, Zhongkai High-tech development Zone |
| Huizhou, Guangdong, 516006 China |
| Attention: Hao Wang , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZVA10 |
| Name of Grantee: | Tonly Technology Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WIFI+BT Audio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0337 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.0459 | ||
| 38 CC | 15E | 5500.0 - 5700.0 | 0.0313 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.033 |
| Output Power listed is the average conducted. Single Modular Approval for mobile RF Exposure condition. This device supports 802.11a and 802.11n with a 20 MHz and 40 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application bf17QHwgCqAKmo5ApKAfpg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tonly Technology Co., Ltd. Section 37, Zhongkai High-tech development Zone Huizhou, Guangdong, 516006 China |
Date of Grant: 05/22/2018 Application Dated: 05/22/2018 |
| Attention: Hao Wang , Compliance Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZVA10 |
| Name of Grantee: | Tonly Technology Co., Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WIFI+BT Audio Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.0337 | ||
| 38 CC | 15E | 5260.0 - 5320.0 | 0.0459 | ||
| 38 CC | 15E | 5500.0 - 5700.0 | 0.0313 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.033 |
| Output Power listed is the average conducted. Single Modular Approval for mobile RF Exposure condition. This device supports 802.11a and 802.11n with a 20 MHz and 40 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |