FCC ID ZWMRTL8812AEBT
802.11a/b/g/n/ac RTL8812AE Combo module
by Ubiqconn Technology, Inc.
Grantee Code: ZWM Product Code: RTL8812AEBT
Latest application date: 2016-09-11
FCC ID Device Details
| FCC ID | ZWMRTL8812AEBT |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | ZWM |
| Product Code | RTL8812AEBT |
| Applicant Business | Ubiqconn Technology, Inc. 🇹🇼 |
| Related Domains |  ubiqconn.com |
| Equipment Class | 802.11a/b/g/n/ac RTL8812AE Combo module |
| Test Firm | Compliance Certification Services Inc. Tainan Lab. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: TX2RTL8812AEBT Grant Date: 02/18/2014 | 2016-09-11 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: TX2RTL8812AEBT Grant Date: 02/18/2014 | 2016-09-11 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: TX2RTL8812AEBT Grant Date: 02/18/2014 | 2016-09-11 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos | External Photos | 2016-09-11 | PDF 170.4 KB |
| Label | ID Label/Location Info | 2016-09-11 | PDF 66 KB |
| Agents Letter | Cover Letter(s) | 2016-09-11 | PDF 103.8 KB |
| Change FCC ID Letter | Cover Letter(s) | 2016-09-11 | PDF 18 KB |
| Permission Letter | Cover Letter(s) | 2016-09-11 | PDF 74.6 KB |
Application Information
| Application ID | mKKXRzxcsEz7/7SMBvBrBg== |
|---|---|
| Final Action Date | 2016-09-11 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: TX2RTL8812AEBT Grant Date: 02/18/2014 |
| Applicant FRN | 0021090337 |
| Model | RTL8812AEBT |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11a/b/g/n/ac RTL8812AE Combo module |
| Responsible Party | Jay Wu, Senior Enigineer, jay_wu@ubiqconn.com , +886-2-87516008 |
| Test Firm | Kurt Chen, Compliance Certification Services Inc. Tainan Lab., kurt.chen@sgs.com  , 886-2-2299-9720 |
| TCB Email | VKerai@tuvam.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| mKKXRzxcsEz7/7SMBvBrBg== | 2016-09-11 | Change in identification of presently authorized equipment. Original FCC ID: TX2RTL8812AEBT Grant Date: 02/18/2014 |
| JBk6HSVCgrJXfmO/lBPrRA== | 2016-09-11 | Change in identification of presently authorized equipment. Original FCC ID: TX2RTL8812AEBT Grant Date: 02/18/2014 |
| +rEOwz1Fo7F1qXQcEUy/Kg== | 2016-09-11 | Change in identification of presently authorized equipment. Original FCC ID: TX2RTL8812AEBT Grant Date: 02/18/2014 |
Equipment Authorization
Grants
TCB Grant - Application mKKXRzxcsEz7/7SMBvBrBg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD BABT Octagon House, Concorde Way, Segensworth North, Fareham, PO15 5RL United Kingdom |
Date of Grant: 09/11/2016 Application Dated: 09/11/2016 |
| Ubiqconn Technology, Inc. |
| 8F, No. 300, Yang Guang St., NeiHu |
| Taipei, 114 Taiwan |
| Attention: Jay Wu , Senior Enigineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZWMRTL8812AEBT |
| Name of Grantee: | Ubiqconn Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n/ac RTL8812AE Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.572 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.676 |
| Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application mKKXRzxcsEz7/7SMBvBrBg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Ubiqconn Technology, Inc. 8F, No. 300, Yang Guang St., NeiHu Taipei, 114 Taiwan |
Date of Grant: 09/11/2016 Application Dated: 09/11/2016 |
| Attention: Jay Wu , Senior Enigineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZWMRTL8812AEBT |
| Name of Grantee: | Ubiqconn Technology, Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11a/b/g/n/ac RTL8812AE Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.002 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.572 | ||
| CC MO | 15C | 5745.0 - 5825.0 | 0.676 |
| Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD BABT Octagon House, Concorde Way, Segensworth North, Fareham, PO15 5RL United Kingdom |
Date of Grant: 09/11/2016 Application Dated: 09/11/2016 |
| Ubiqconn Technology, Inc. |
| 8F, No. 300, Yang Guang St., NeiHu |
| Taipei, 114 Taiwan |
| Attention: Jay Wu , Senior Enigineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZWMRTL8812AEBT |
| Name of Grantee: | Ubiqconn Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n/ac RTL8812AE Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.048 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5500.0 - 5580.0 | 0.146 | ||
| CC MO ND | 15E | 5660.0 - 5700.0 | 0.141 |
| Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operation in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provide with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application JBk6HSVCgrJXfmO/lBPrRA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Ubiqconn Technology, Inc. 8F, No. 300, Yang Guang St., NeiHu Taipei, 114 Taiwan |
Date of Grant: 09/11/2016 Application Dated: 09/11/2016 |
| Attention: Jay Wu , Senior Enigineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZWMRTL8812AEBT |
| Name of Grantee: | Ubiqconn Technology, Inc. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11a/b/g/n/ac RTL8812AE Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.048 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5500.0 - 5580.0 | 0.146 | ||
| CC MO ND | 15E | 5660.0 - 5700.0 | 0.141 |
| Power listed is the maximum combined conducted output power. Single Modular Approval for mobile RF Exposure condition. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operation in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-Users must be provide with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Operations in the 5.15-5.25GHz band are restricted to indoor usage only. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 03-287 as a Client only without Radar Detection. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
TUV SUD BABT Octagon House, Concorde Way, Segensworth North, Fareham, PO15 5RL United Kingdom |
Date of Grant: 09/11/2016 Application Dated: 09/11/2016 |
| Ubiqconn Technology, Inc. |
| 8F, No. 300, Yang Guang St., NeiHu |
| Taipei, 114 Taiwan |
| Attention: Jay Wu , Senior Enigineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZWMRTL8812AEBT |
| Name of Grantee: | Ubiqconn Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11a/b/g/n/ac RTL8812AE Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provide with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application +rEOwz1Fo7F1qXQcEUy/Kg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Ubiqconn Technology, Inc. 8F, No. 300, Yang Guang St., NeiHu Taipei, 114 Taiwan |
Date of Grant: 09/11/2016 Application Dated: 09/11/2016 |
| Attention: Jay Wu , Senior Enigineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZWMRTL8812AEBT |
| Name of Grantee: | Ubiqconn Technology, Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 802.11a/b/g/n/ac RTL8812AE Combo module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.003 |
| Output power listed is conducted. Single Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators must be provide with antenna installation instructions. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |