FCC ID ZYFACD100P-CG

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 08/19/2013 Application Dated: 08/18/2013

3M Cogent, Inc.

639 N. Rosemead Blvd.

Pasadena, CA 91107

Attention: Ivy Lv , Certification Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	ZYFACD100P-CG
Name of Grantee:	3M Cogent, Inc.
Equipment Class:	PCS Licensed Transmitter
Notes:	Mini-Gate

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
19 20	22H	824.2  -  848.8	1.0046	0.1  PM	246KGXW
19 20	24E	1850.2  -  1909.8	0.7096	0.1  PM	248KGXW

Power Output is ERP for Part 22 and EIRP for Part 24. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains a RFID transmitter.

19:	This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

3M Cogent, Inc. 639 N. Rosemead Blvd. Pasadena, CA 91107 United States

Date of Grant: 08/19/2013 Application Dated: 08/18/2013

Attention: Ivy Lv , Certification Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	ZYFACD100P-CG
Name of Grantee:	3M Cogent, Inc.
Equipment Class:	PCS Licensed Transmitter
Notes:	Mini-Gate
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
19 20	22H	824.2  -  848.8	1.0046	0.1  PM	246KGXW
19 20	24E	1850.2  -  1909.8	0.7096	0.1  PM	248KGXW

Power Output is ERP for Part 22 and EIRP for Part 24. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains a RFID transmitter.

19:	This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

TCB Grant - Application LHeugp8cF6otfEphOtt4Eg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101

Date of Grant: 08/19/2013 Application Dated: 08/18/2013

3M Cogent, Inc.

639 N. Rosemead Blvd.

Pasadena, CA 91107

Attention: Ivy Lv , Certification Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	ZYFACD100P-CG
Name of Grantee:	3M Cogent, Inc.
Equipment Class:	Part 15 Low Power Communication Device Transmitter
Notes:	Mini-Gate

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
19 20	15C	13.56  -  13.56

This device contains a GSM transmitter.

19:	This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

3M Cogent, Inc. 639 N. Rosemead Blvd. Pasadena, CA 91107 United States

Date of Grant: 08/19/2013 Application Dated: 08/18/2013

Attention: Ivy Lv , Certification Operations

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	ZYFACD100P-CG
Name of Grantee:	3M Cogent, Inc.
Equipment Class:	Part 15 Low Power Communication Device Transmitter
Notes:	Mini-Gate
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
19 20	15C	13.56  -  13.56

This device contains a GSM transmitter.

19:	This device must be marketed with a shielded interface cable which incorporates ferrite cores equal in quantity and type to those used during Certification testing.
20:	All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed.

Mail To: