FCC ID ZZ6-WNFQ268AXIBT
WiFi 6E M.2 Module
by Varex Imaging Corporation
Grantee Code: ZZ6 Product Code: WNFQ268AXIBT
Latest application date: 2026-05-28
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5935-7115 MHz | Original Equipment | 2026-05-28 |
| 5935-7115 MHz | Class II permissive change or modification of presently authorized equipment | 2026-05-22 |
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2026-05-22 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: RYK-WNFQ268AXBT Grant Date: 03/15/2022 | 2025-08-28 |
| 2412-2462 MHz | Change in identification of presently authorized equipment. Original FCC ID: RYK-WNFQ268AXBT Grant Date: 03/15/2022 | 2025-08-28 |
| 5935-7115 MHz | Change in identification of presently authorized equipment. Original FCC ID: RYK-WNFQ268AXBT Grant Date: 03/15/2022 | 2025-08-28 |
| 5745-5825 MHz | Change in identification of presently authorized equipment. Original FCC ID: RYK-WNFQ268AXBT Grant Date: 03/15/2022 | 2025-08-28 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Radio Module User Manual-05-22-2026-public_JDM | Users Manual | 2026-05-28 | PDF 404.3 KB |
| Internal Photo_RYK-WNFQ268AXBT | Internal Photos | 2026-05-28 | PDF 258.8 KB |
| External photos | External Photos | 2026-05-28 | PDF 55.6 KB |
| External photos_RYK-WNFQ268AXBT | External Photos | 2026-05-28 | PDF 1.9 MB |
| Label | ID Label/Location Info | 2026-05-28 | PDF 144.4 KB |
| Radio Module Varex Label | ID Label/Location Info | 2025-08-28 | PDF 144.4 KB |
| R15217443-EP1a SETUP PHOTO EXHIBIT | Test Setup Photos | 2026-05-28 | PDF 1.8 MB |
| Radio Module and Antenna Photos | Test Setup Photos | 2026-05-28 | PDF 184.5 KB |
| R15217443-C1a v2 FCC_ISED CONTENTION PROTOCOL REPORT MODULE REPORT | Test Report | 2026-05-28 | PDF 3.9 MB |
| R15217443-E7a v3 FCC IC 6GHZ MODULE REPORT_Part1 | Test Report | 2026-05-28 | PDF 4.8 MB |
| R15217443-E7a v3 FCC IC 6GHZ MODULE REPORT_Part2 | Test Report | 2026-05-28 | PDF 3.8 MB |
| VAREX_CBSA WiFi 6E Antenna_Passive_Antenna_Final_Report_1-24 | Test Report | 2026-05-28 | PDF 4.3 MB |
| VAREX_CBSA WiFi 6E Antenna_Passive_Antenna_Final_Report_25-50 | Test Report | 2026-05-28 | PDF 3.4 MB |
| VAREX_CBSA WiFi 6E Antenna_Passive_Antenna_Final_Report_50-86 | Test Report | 2026-05-28 | PDF 4.9 MB |
| R15217443-D1a v2 FCC DFS REPORT MODULE REPORT | Test Report | 2026-05-22 | PDF 1.5 MB |
| R15217443-E6a v3 FCC IC 5GHZ MODULE REPORT | Test Report | 2026-05-22 | PDF 5 MB |
| FCC 2.911d5 Attestation-4-13-2026 | Attestation Statements | 2026-05-28 | PDF 201.3 KB |
| FCC Agent for service attestation from Applicant-as-Agent-AE | Attestation Statements | 2026-05-28 | PDF 100 KB |
| FCC 2.911d5 Attestation-New Version-AE | Attestation Statements | 2025-08-28 | PDF 101.2 KB |
| FCC C2PC Hardware change | Cover Letter(s) | 2026-05-28 | PDF 182.6 KB |
| FCC Request for Confidentiality-4336W-HD-05-21-2026 | Cover Letter(s) | 2026-05-28 | PDF 207.1 KB |
| FCC Request for Confidentiality-4336W-HD-05-22-2026 | Cover Letter(s) | 2026-05-28 | PDF 208.4 KB |
| FCC Authorization Letter Signed_241218_133231 | Cover Letter(s) | 2025-08-28 | PDF 1.2 MB |
| FCC Authorization Letter-Change in ID [from NEW applicant] - AE | Cover Letter(s) | 2025-08-28 | PDF 66.9 KB |
| FCC Authorization Letter-Change in ID_SparkLAN_20250801 | Cover Letter(s) | 2025-08-28 | PDF 455.6 KB |
| Wireless Signatory Delegations_250131_112802 | Cover Letter(s) | 2025-08-28 | PDF 573.2 KB |
| R15217443-E8a v2 FCC IC MPE_MODULE REPORT | RF Exposure Info | 2026-05-28 | PDF 274.7 KB |
| Radio Module Operational Description and User Manual-05-21-2026 Metadata only | Operational Description | PDF 744.5 KB | |
| 04_Block Diagram_RYK-WNFQ268AXBT Metadata only | Block Diagram | PDF 173.6 KB | |
| 05_Schematics_RYK-WNFQ268AXBT Metadata only | Schematics | PDF 398.3 KB | |
| 06_Operation Description_RYK-WNFQ268AXBT_01 Metadata only | Operational Description | PDF 5.4 MB | |
| Radio module Tune up TX power-FCC-4336W-HD Metadata only | Operational Description | PDF 198.1 KB |
Application Information
| Application ID | ZUeFKhOWcvZGtEudWCKJog== |
|---|---|
| Final Action Date | 2026-05-28 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0037135563 |
| Model | WNFQ268AXIBT |
| Frequency Range | 5935-7115 MHz |
| Equipment Class | 6ID - 15E 6 GHz Low Power Indoor Access Point |
| Device Description | WiFi 6E M.2 Module |
| Responsible Party | Laurie Jensen, laurie.jensen@vareximaging.com  , 8019725000 |
| Technical Contact | Lariah Sanders, UL LLC, lariah.sanders@ul.com  , 9195490945 |
| Non-Technical Contact | Arezou Edalati, Varex Imaging Corporation, Arezou.edalati@vareximaging.com |
| Test Firm | Steven Thompson, UL LLC, steven.d.thompson@ul.com , 919 549 1430 |
| TCB Email | LST.FRE.CertNotice@ul.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ZUeFKhOWcvZGtEudWCKJog== | 2026-05-28 | Original Equipment |
| lIeALwFbYYVxPCnTQdnMkA== | 2026-05-22 | Class II permissive change or modification of presently authorized equipment |
| 0MozVhyXlET/Nv9bM5cenw== | 2026-05-22 | Class II permissive change or modification of presently authorized equipment |
| zTRhCeiDpNbby4kI7ekWxg== | 2025-08-28 | Change in identification of presently authorized equipment. Original FCC ID: RYK-WNFQ268AXBT Grant Date: 03/15/2022 |
| h+3tv/KvHdYBBwFcX2sfDg== | 2025-08-28 | Change in identification of presently authorized equipment. Original FCC ID: RYK-WNFQ268AXBT Grant Date: 03/15/2022 |
| gultJMo4NMfxCcDTin54NQ== | 2025-08-28 | Change in identification of presently authorized equipment. Original FCC ID: RYK-WNFQ268AXBT Grant Date: 03/15/2022 |
| fAueQPUPauvzWmZXPX3ERw== | 2025-08-28 | Change in identification of presently authorized equipment. Original FCC ID: RYK-WNFQ268AXBT Grant Date: 03/15/2022 |
Equipment Authorization
Grants
TCB Grant - Application ZUeFKhOWcvZGtEudWCKJog==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 05/28/2026 Application Dated: 05/22/2026 |
| Varex Imaging Corporation |
| 1678 South Pioneer Road |
| Salt Lake City, UT 84104 |
| Attention: Laurie Jensen , Regulatory Affairs Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZZ6-WNFQ268AXIBT |
| Name of Grantee: | Varex Imaging Corporation |
| Equipment Class: | 15E 6 GHz Low Power Indoor Access Point |
| Notes: | Digital Image Receptor |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5935.0 - 7115.0 | 0.064 |
| Output power listed is EIRP. This device has 20 MHz, 40 MHz, 80MHz and 160 MHz bandwidth modes. Modular approval. This module may only be marketed and sold to an OEM system integrator that has an agreement with the grantee and has been provided detailed instructions on installation conditions to ensure that the correct firmware is installed. Host systems must be intended for indoor use only, outdoor applications are NOT allowed. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module including the maximum and minimum antenna gains and antenna type. The host integrator must follow the integration instructions provided by the module manufacturer. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. To satisfy RF exposure requirements the module antennas must be installed with a minimum separation distance of 20 cm from persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application zTRhCeiDpNbby4kI7ekWxg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/28/2025 Application Dated: 08/21/2025 |
| Varex Imaging Corporation |
| 1678 South Pioneer Road |
| Salt Lake City, UT 84104 |
| Attention: Laurie Jensen , Regulatory Affairs Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZZ6-WNFQ268AXIBT |
| Name of Grantee: | Varex Imaging Corporation |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi 6E BT M.2 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0084 |
| Listed output power is peak conducted. Single Modular Approval The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use for continuing compliance of the module as described in KDB 996369 D03, including but not limited to the labeling of the host product, providing instructions to end users of the host system related to RF exposure compliance and minimum antenna-to-end user separation distances, the antenna type, and the maximum antenna gain. The host integrator must follow the integration instructions provided by the module manufacturer. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369 D04. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
TCB Grant - Application lIeALwFbYYVxPCnTQdnMkA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 05/22/2026 Application Dated: 05/22/2026 |
| Varex Imaging Corporation |
| 1678 South Pioneer Road |
| Salt Lake City, UT 84104 |
| Attention: Laurie Jensen , Regulatory Affairs Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZZ6-WNFQ268AXIBT |
| Name of Grantee: | Varex Imaging Corporation |
| Equipment Class: | 15E 6 GHz Low Power Indoor Client |
| Notes: | Digital Image Receptor |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5935.0 - 7115.0 | 0.06427 |
| C2PC-Adding new antenna Output power listed is EIRP. This device has 20 MHz, 40 MHz, 80MHz and 160 MHz bandwidth modes. Modular approval. This module may only be marketed and sold to an OEM system integrator that has an agreement with the grantee and has been provided detailed instructions on installation conditions to ensure that the correct firmware is installed. Host systems must be intended for indoor use only, outdoor applications are NOT allowed. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module including the maximum and minimum antenna gains and antenna type. The host integrator must follow the integration instructions provided by the module manufacturer. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. To satisfy RF exposure requirements the module antennas must be installed with a minimum separation distance of 20 cm from persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application h+3tv/KvHdYBBwFcX2sfDg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/28/2025 Application Dated: 08/21/2025 |
| Varex Imaging Corporation |
| 1678 South Pioneer Road |
| Salt Lake City, UT 84104 |
| Attention: Laurie Jensen , Regulatory Affairs Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZZ6-WNFQ268AXIBT |
| Name of Grantee: | Varex Imaging Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi 6E BT M.2 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0039 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.4966 |
| Listed output power is peak conducted. This device has 20 MHz and 40 MHz bandwidth modes. Single Modular Approval The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use for continuing compliance of the module as described in KDB 996369 D03, including but not limited to the labeling of the host product, providing instructions to end users of the host system related to RF exposure compliance and minimum antenna-to-end user separation distances, the antenna type, and the maximum antenna gain. The host integrator must follow the integration instructions provided by the module manufacturer. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369 D04. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application gultJMo4NMfxCcDTin54NQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/28/2025 Application Dated: 08/21/2025 |
| Varex Imaging Corporation |
| 1678 South Pioneer Road |
| Salt Lake City, UT 84104 |
| Attention: Laurie Jensen , Regulatory Affairs Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZZ6-WNFQ268AXIBT |
| Name of Grantee: | Varex Imaging Corporation |
| Equipment Class: | 15E 6 GHz Low Power Indoor Client |
| Notes: | Wi-Fi 6E BT M.2 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5935.0 - 7115.0 | 0.079 |
| Output power listed is EIRP. This device has 20 MHz, 40 MHz, 80MHz and 160 MHz bandwidth modes. Modular approval. This module may only be marketed and sold to an OEM system integrator that has an agreement with the grantee and has been provided detailed instructions on installation conditions to ensure that the correct firmware is installed. Host systems must be intended for indoor use only, outdoor applications are NOT allowed. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module including the maximum and minimum antenna gains and antenna type. The host integrator must follow the integration instructions provided by the module manufacturer. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. To satisfy RF exposure requirements the module antennas must be installed with a minimum separation distance of 20 cm from persons. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application fAueQPUPauvzWmZXPX3ERw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 08/28/2025 Application Dated: 08/21/2025 |
| Varex Imaging Corporation |
| 1678 South Pioneer Road |
| Salt Lake City, UT 84104 |
| Attention: Laurie Jensen , Regulatory Affairs Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZZ6-WNFQ268AXIBT |
| Name of Grantee: | Varex Imaging Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Wi-Fi 6E BT M.2 Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.1084 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.0995 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.1972 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.195 |
| Listed output power is peak conducted. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. Single Modular Approval The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use for continuing compliance of the module as described in KDB 996369 D03, including but not limited to the labeling of the host product, providing instructions to end users of the host system related to RF exposure compliance and minimum antenna-to-end user separation distances, the antenna type, and the maximum antenna gain. The host integrator must follow the integration instructions provided by the module manufacturer. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369 D04. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
TCB Grant - Application 0MozVhyXlET/Nv9bM5cenw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
UL Verification Services Inc. 47173 Benicia Street Fremont, CA 94538 |
Date of Grant: 05/22/2026 Application Dated: 05/22/2026 |
| Varex Imaging Corporation |
| 1678 South Pioneer Road |
| Salt Lake City, UT 84104 |
| Attention: Laurie Jensen , Regulatory Affairs Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | ZZ6-WNFQ268AXIBT |
| Name of Grantee: | Varex Imaging Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Digital Image Receptor |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0415 | ||
| CC MO | 15E | 5260.0 - 5320.0 | 0.04325 | ||
| CC MO | 15E | 5500.0 - 5720.0 | 0.02958 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.03811 |
| C2PC-Adding new antenna Listed output power is peak conducted. This device has 20 MHz, 40 MHz, 80 MHz and 160 MHz bandwidth modes. Single Modular Approval The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use for continuing compliance of the module as described in KDB 996369 D03, including but not limited to the labeling of the host product, providing instructions to end users of the host system related to RF exposure compliance and minimum antenna-to-end user separation distances, the antenna type, and the maximum antenna gain. The host integrator must follow the integration instructions provided by the module manufacturer. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369 D04. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |