FCC ID BEJ-WC1NP6

RF Module

by LG Electronics USA

Grantee Code: BEJ   Product Code: WC1NP6
Latest application date: 2015-12-29

FCC ID Device Details

FCC IDBEJ-WC1NP6
Mirrorsfcc.id | gov | fccid.ai
Grantee CodeBEJ
Product CodeWC1NP6
Applicant BusinessLG Electronics USA 🇺🇸
Related Domains lge.com
Equipment ClassRF Module
Test FirmHCT Co., LTD

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2015-12-29
5180-5240 MHzOriginal Equipment2015-12-29
2402-2480 MHzOriginal Equipment2015-12-29

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2016-06-15PDF 1.1 MB
Internal PhotosInternal Photos2016-06-15PDF 229.2 KB
External PhotosExternal Photos2016-06-15PDF 202.7 KB
ID Label and Location InfoID Label/Location Info2015-12-29PDF 130.4 KB
Test Setup Photos -1 of 2Test Setup Photos2016-06-15PDF 3.2 MB
Test Setup Photos -2 of 2Test Setup Photos2016-06-15PDF 4.5 MB
Test ReportTest Report2015-12-29PDF 5.3 MB
Test ReportTest Report2015-12-29PDF 4.4 MB
Test Report - BT LETest Report2015-12-29PDF 3.5 MB
Test Report - WiFiTest Report2015-12-29PDF 5 MB
Confidential Request LetterCover Letter(s)2015-12-29PDF 59.8 KB
Modular Declaration LetterCover Letter(s)2015-12-29PDF 29 KB
RF Exposure InfoRF Exposure Info2015-12-29PDF 85.3 KB
Block Diagram Metadata onlyBlock DiagramPDF 408.6 KB
Schematics Metadata onlySchematicsPDF 207.4 KB
Operational Description Metadata onlyOperational DescriptionPDF 337.2 KB
SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES Metadata onlyOperational DescriptionPDF 17 KB

Application Information

Application IDm0jG9OQDIa6z2jJY7pvLhw==
Final Action Date2015-12-29
Application PurposeOriginal Equipment
Applicant FRN0023476120
ModelWC1NP6
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionRF Module
Responsible PartySung Soo Kim, Director, Regulatory and Environmental Affairs, sungsoo.kim@lge.com , 201-266-2215
Test FirmSang Lee, HCT Co., LTD, sjlee@HCT.co.kr , 82-31-645-6420
TCB Emailtcb@hctamerica.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date06/15/2016
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is the peak conducted output power. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna(s) used for this device in portable configurations is installed in mobile hosts with a minimum antenna to user separation distance of at least 20 cm. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission.

Applications

Application IDDatePurpose
m0jG9OQDIa6z2jJY7pvLhw==2015-12-29Original Equipment
KyLBhF+iF3dia0KFQnh5DQ==2015-12-29Original Equipment
85gDSbCTKFnfLAcgPTrFdg==2015-12-29Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.01115CCC
2402-2480 MHz0.010000015CCC
2412-2462 MHz0.08315CCC, MO
5180-5240 MHz0.04715ECC, MO
5745-5825 MHz0.03815ECC, MO

Grants

TCB Grant - Application m0jG9OQDIa6z2jJY7pvLhw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  HCT America LLC
1726 Ringwood Avenue
San Jose, CA 95131
Date of Grant: 12/29/2015

Application Dated: 12/20/2015
LG Electronics USA
111 Sylvan Avenue
North Building
Englewood Cliffs, NJ 07632
 
Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BEJ-WC1NP6
Name of Grantee:  LG Electronics USA
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RF Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power listed is the peak conducted output power. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna(s) used for this device in portable configurations is installed in mobile hosts with a minimum antenna to user separation distance of at least 20 cm. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application m0jG9OQDIa6z2jJY7pvLhw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LG Electronics USA
111 Sylvan Avenue North Building
Englewood Cliffs, NJ 07632
United States
  Date of Grant: 12/29/2015

Application Dated: 12/20/2015
 
Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BEJ-WC1NP6
Name of Grantee:  LG Electronics USA
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: RF Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.01  

Power listed is the peak conducted output power. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna(s) used for this device in portable configurations is installed in mobile hosts with a minimum antenna to user separation distance of at least 20 cm. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application KyLBhF+iF3dia0KFQnh5DQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  HCT America LLC
1726 Ringwood Avenue
San Jose, CA 95131
Date of Grant: 12/29/2015

Application Dated: 12/29/2015
LG Electronics USA
111 Sylvan Avenue
North Building
Englewood Cliffs, NJ 07632
 
Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BEJ-WC1NP6
Name of Grantee:  LG Electronics USA
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: RF Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.047  
CC MO 15E 5745.0  -  5825.0 0.038  

Power listed is the peak conducted output power. This module may be installed only by the OEM or an OEM integrator. This device has 2x2 MIMO operational capabilities. This approval is valid when the antenna(s) used for this device in portable configurations is installed in mobile hosts with a minimum antenna to user separation distance of at least 20 cm. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission. This device operates with 20 and 40MHz channel bandwidth capabilities.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application KyLBhF+iF3dia0KFQnh5DQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LG Electronics USA
111 Sylvan Avenue North Building
Englewood Cliffs, NJ 07632
United States
  Date of Grant: 12/29/2015

Application Dated: 12/29/2015
 
Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BEJ-WC1NP6
Name of Grantee:  LG Electronics USA
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: RF Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.047  
CC MO 15E 5745.0  -  5825.0 0.038  

Power listed is the peak conducted output power. This module may be installed only by the OEM or an OEM integrator. This device has 2x2 MIMO operational capabilities. This approval is valid when the antenna(s) used for this device in portable configurations is installed in mobile hosts with a minimum antenna to user separation distance of at least 20 cm. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission. This device operates with 20 and 40MHz channel bandwidth capabilities.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 85gDSbCTKFnfLAcgPTrFdg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  HCT America LLC
1726 Ringwood Avenue
San Jose, CA 95131
Date of Grant: 12/29/2015

Application Dated: 12/29/2015
LG Electronics USA
111 Sylvan Avenue
North Building
Englewood Cliffs, NJ 07632
 
Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BEJ-WC1NP6
Name of Grantee:  LG Electronics USA
Equipment Class: Digital Transmission System
Notes: RF Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.011  
CC MO 15C 2412.0  -  2462.0 0.083  

Power listed is the peak conducted output power. This module may be installed only by the OEM or an OEM integrator. This device has 2x2 MIMO operational capabilities. This approval is valid when the antenna(s) used for this device in portable configurations is installed in mobile hosts with a minimum antenna to user separation distance of at least 20 cm. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission. This device operates with 20MHz channel bandwidth capabilities.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 85gDSbCTKFnfLAcgPTrFdg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

LG Electronics USA
111 Sylvan Avenue North Building
Englewood Cliffs, NJ 07632
United States
  Date of Grant: 12/29/2015

Application Dated: 12/29/2015
 
Attention: Sung Soo Kim , Director, Regulatory and Environmental Affairs

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  BEJ-WC1NP6
Name of Grantee:  LG Electronics USA
Equipment Class: Digital Transmission System
Notes: RF Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.011  
CC MO 15C 2412.0  -  2462.0 0.083  

Power listed is the peak conducted output power. This module may be installed only by the OEM or an OEM integrator. This device has 2x2 MIMO operational capabilities. This approval is valid when the antenna(s) used for this device in portable configurations is installed in mobile hosts with a minimum antenna to user separation distance of at least 20 cm. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission. This device operates with 20MHz channel bandwidth capabilities.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: