FCC ID HLZBE200NG
Intel Wi-Fi 7 BE200
by Acer Incorporated
Grantee Code: HLZ Product Code: BE200NG
Latest application date: 2024-09-24
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-24 |
| 6665 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-24 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-24 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2024-09-24 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200NG Grant Date: 08/23/2023 | 2024-02-20 |
| 5955-6415 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200NG Grant Date: 09/14/2023 | 2024-02-20 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200NG Grant Date: 08/23/2023 | 2024-02-20 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200NG Grant Date: 08/23/2023 | 2024-02-20 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Regulatory Info and Safety Guide | Users Manual | 2025-03-23 | PDF 429.8 KB |
| User Manual | Users Manual | 2025-03-23 | PDF 1.7 MB |
| Users Manual | Users Manual | 2024-08-01 | PDF 5.1 MB |
| Internal Photos pt. 1 | Internal Photos | 2025-03-23 | PDF 5.3 MB |
| Internal Photos pt. 2 | Internal Photos | 2025-03-23 | PDF 4 MB |
| External Photos | External Photos | 2025-03-23 | PDF 828.9 KB |
| External Photos | External Photos | 2024-08-01 | PDF 238 KB |
| Label Info and Location | ID Label/Location Info | 2024-09-24 | PDF 289.9 KB |
| ID Label/Location Info | ID Label/Location Info | 2024-02-20 | PDF 387.8 KB |
| TSUP Antenna | Test Setup Photos | 2025-03-23 | PDF 3 MB |
| TSUP SAR | Test Setup Photos | 2025-03-23 | PDF 867 KB |
| Antenna Report | Test Report | 2024-09-24 | PDF 193.8 KB |
| Attestation Statement 2.911(d)(7) | Attestation Statements | 2024-09-24 | PDF 154.7 KB |
| Attstn Stmts Part 2.911(d)(5)(i)&(ii) | Attestation Statements | 2024-09-24 | PDF 146.1 KB |
| Attestation Statement_Part 2.911_d__5__i_ | Attestation Statements | 2024-02-20 | PDF 183.7 KB |
| Attestation Statement_Part 2.911_d__5__ii_ | Attestation Statements | 2024-02-20 | PDF 182.4 KB |
| U.S. Agent Authorized Letter | Attestation Statements | 2024-02-20 | PDF 154.7 KB |
| Authorization Letter | Cover Letter(s) | 2024-09-24 | PDF 85 KB |
| C2PC Letter | Cover Letter(s) | 2024-09-24 | PDF 118.8 KB |
| Confidentiality Letter | Cover Letter(s) | 2024-09-24 | PDF 156.8 KB |
| Authorization Letter for Grantee | Cover Letter(s) | 2024-02-20 | PDF 30.8 KB |
| Change ID declaration letter | Cover Letter(s) | 2024-02-20 | PDF 276.6 KB |
| Declaration of authorization | Cover Letter(s) | 2024-02-20 | PDF 199 KB |
| FCC Auth Ltr for Change of ID | Cover Letter(s) | 2024-02-20 | PDF 95.2 KB |
| FCC Modular Approval Letter | Cover Letter(s) | 2024-02-20 | PDF 325.2 KB |
| confidentiality Metadata only | Cover Letter(s) | 2024-02-20 | PDF 226.1 KB |
| confidentiality Revised | Cover Letter(s) | 2024-02-20 | PDF 268.8 KB |
| SAR Repor tapp C pt. 1 | RF Exposure Info | 2024-09-24 | PDF 5.1 MB |
| SAR Repor tapp C pt. 2 | RF Exposure Info | 2024-09-24 | PDF 470.3 KB |
| SAR Report | RF Exposure Info | 2024-09-24 | PDF 4.9 MB |
| SAR Report App B pt. 1 | RF Exposure Info | 2024-09-24 | PDF 5.1 MB |
| SAR Report App B pt. 2 | RF Exposure Info | 2024-09-24 | PDF 5.1 MB |
| SAR Report App B pt. 3 | RF Exposure Info | 2024-09-24 | PDF 1.5 MB |
| Block Diagram Metadata only | Block Diagram | PDF 794.7 KB | |
| Schematics Metadata only | Schematics | PDF 3 MB | |
| Inquiry Response Metadata only | Operational Description | PDF 139.5 KB | |
| NII Software security info Metadata only | Operational Description | PDF 226.2 KB | |
| Operational Description Metadata only | Operational Description | PDF 451.6 KB | |
| PAG checklist Metadata only | Operational Description | PDF 214.1 KB | |
| NII Software security info Metadata only | SDR Software/Security Info. | PDF 226.2 KB |
Application Information
| Application ID | pESvptTNLYXnynGgBIAhRg== |
|---|---|
| Final Action Date | 2024-09-24 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0013355508 |
| Model | BE200NG |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Intel Wi-Fi 7 BE200 |
| Responsible Party | RU Jan, Sr. Manager, ru.jan@acer.com  , 886-2-6606-3131 |
| Test Firm | Ryan WANG, SGS Taiwan Ltd. Central RF Lab, ryan-ec.wang@sgs.com  , 886222993279 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 03/23/2025 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band-edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.45 W/kg and 1.58 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). Class II Permissive Change: Authorizes portable use when integrated into the Acer Model N24Q1 Notebook Computer. The highest reported SAR values for body and simultaneous transmission use conditions are 0.87 W/kg and 1.25 W/kg, respectively. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| pESvptTNLYXnynGgBIAhRg== | 2024-09-24 | Class II permissive change or modification of presently authorized equipment |
| PgSmSG5H2S4Q8yZgkWRnGw== | 2024-09-24 | Class II permissive change or modification of presently authorized equipment |
| DLnb4OPTAbqK90lmflux7g== | 2024-09-24 | Class II permissive change or modification of presently authorized equipment |
| BwlelHp0RPPUIIvFUJe37g== | 2024-09-24 | Class II permissive change or modification of presently authorized equipment |
| yK67s/84XzKFYQ+tWibZJg== | 2024-02-20 | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200NG Grant Date: 08/23/2023 |
| xhAzMt7t03JOQgMSr4n9Iw== | 2024-02-20 | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200NG Grant Date: 09/14/2023 |
| pOWNkZ5eC631ske9CJLNQQ== | 2024-02-20 | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200NG Grant Date: 08/15/2023 |
| c+Q+91+hNdAHo9o6vUOLTw== | 2024-02-20 | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200NG Grant Date: 08/23/2023 |
| CbOdgST40gpnyQrDNvVgEA== | 2024-02-20 | Change in identification of presently authorized equipment. Original FCC ID: PD9BE200NG Grant Date: 08/23/2023 |
Equipment Authorization
| Frequency | Output | Rules | Grant Notes |
|---|---|---|---|
| 2402-2480 MHz | 0.028 | 15C | CC |
| 2402-2480 MHz | 0.0320000 | 15C | CC |
| 2412-2472 MHz | 0.998 | 15C | CC, MO |
| 2422-2462 MHz | 0.997 | 15C | CC, MO |
| 5210 MHz | 0.138 | 15E | CC, MO |
| 5250 MHz | 0.097 | 15E | CC, MO, ND |
| 5260-5320 MHz | 0.148 | 15E | CC, MO, ND |
| 5270-5310 MHz | 0.227 | 15E | CC, MO, ND |
| 5290 MHz | 0.142 | 15E | CC, MO, ND |
| 5500-5700 MHz | 0.15 | 15E | CC, MO, ND |
| 5510-5670 MHz | 0.227 | 15E | CC, MO, ND |
| 5530-5610 MHz | 0.223 | 15E | CC, MO, ND |
| 5570 MHz | 0.154 | 15E | CC, MO, ND |
| 5690 MHz | 0.249 | 15E | CC, MO, ND |
| 5710 MHz | 0.244 | 15E | CC, MO, ND |
| 5710 MHz | 0.224 | 15E | CC, MO, ND |
| 5720 MHz | 0.136 | 15E | CC, MO, ND |
| 5745-5825 MHz | 0.433 | 15E | CC, MO |
| 5755-5795 MHz | 0.413 | 15E | CC, MO |
| 5775 MHz | 0.234 | 15E | CC, MO |
| 5815 MHz | 0.37 | 15E | CC, EP, MO |
| 5835-5875 MHz | 0.708 | 15E | CC, EP, MO |
| 5845-5885 MHz | 0.327 | 15E | CC, EP, MO |
| 5855 MHz | 0.731 | 15E | CC, EP, MO |
| 5955-6415 MHz | 0.57 | 15E | CC, EP, MO |
| 5965-7085 MHz | 0.025 | 15E | CC, EP, MO |
| 5965-6405 MHz | 0.962 | 15E | CC, EP, MO |
| 5985-7025 MHz | 0.049 | 15E | CC, EP, MO |
| 5985-6385 MHz | 0.907 | 15E | CC, EP, MO |
| 6025-6985 MHz | 0.093 | 15E | CC, EP, MO |
| 6025-6345 MHz | 0.712 | 15E | CC, EP, MO |
| 6105-6265 MHz | 0.35 | 15E | CC, EP, MO |
| 6105-6905 MHz | 0.163 | 15E | CC, EP, MO |
| 6535-6855 MHz | 0.568 | 15E | CC, EP, MO |
| 6565-6845 MHz | 0.956 | 15E | CC, EP, MO |
| 6625-6785 MHz | 0.802 | 15E | CC, EP, MO |
| 6665 MHz | 0.623 | 15E | CC, EP, MO |
Grants
TCB Grant - Application yK67s/84XzKFYQ+tWibZJg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/20/2024 Application Dated: 02/02/2024 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZBE200NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wi-Fi 7 BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.151 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.224 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.138 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.097 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.227 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.142 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.15 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.227 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.244 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.136 | ||
| CC MO ND | 15E | 5690.0 - 5690.0 | 0.249 | ||
| CC MO ND | 15E | 5530.0 - 5610.0 | 0.223 | ||
| CC MO ND | 15E | 5570.0 - 5570.0 | 0.154 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.433 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.413 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.234 | ||
| CC EP MO | 15E | 5845.0 - 5885.0 | 0.327 | ||
| CC EP MO | 15E | 5835.0 - 5875.0 | 0.708 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.731 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.37 |
| Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled foreither 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions tosatisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.77 W/kg and 1.58W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (5.11 to5.15 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to4.95 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application yK67s/84XzKFYQ+tWibZJg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi New Taipei City, 221 Taiwan |
Date of Grant: 02/20/2024 Application Dated: 02/02/2024 |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZBE200NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wi-Fi 7 BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.151 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.224 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.138 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.097 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.227 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.142 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.15 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.227 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.244 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.136 | ||
| CC MO ND | 15E | 5690.0 - 5690.0 | 0.249 | ||
| CC MO ND | 15E | 5530.0 - 5610.0 | 0.223 | ||
| CC MO ND | 15E | 5570.0 - 5570.0 | 0.154 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.433 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.413 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.234 | ||
| CC EP MO | 15E | 5845.0 - 5885.0 | 0.327 | ||
| CC EP MO | 15E | 5835.0 - 5875.0 | 0.708 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.731 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.37 |
| Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled foreither 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions tosatisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.77 W/kg and 1.58W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (5.11 to5.15 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to4.95 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/20/2024 Application Dated: 02/02/2024 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZBE200NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Intel Wi-Fi 7 BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.012 | ||
| CC EP MO | 15E | 5965.0 - 7085.0 | 0.025 | ||
| CC EP MO | 15E | 5985.0 - 7025.0 | 0.049 | ||
| CC EP MO | 15E | 6025.0 - 6985.0 | 0.093 | ||
| CC EP MO | 15E | 6105.0 - 6905.0 | 0.163 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.57 | ||
| CC EP MO | 15E | 5965.0 - 6405.0 | 0.962 | ||
| CC EP MO | 15E | 5985.0 - 6385.0 | 0.907 | ||
| CC EP MO | 15E | 6025.0 - 6345.0 | 0.712 | ||
| CC EP MO | 15E | 6105.0 - 6265.0 | 0.35 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.568 | ||
| CC EP MO | 15E | 6565.0 - 6845.0 | 0.956 | ||
| CC EP MO | 15E | 6625.0 - 6785.0 | 0.802 | ||
| CC EP MO | 15E | 6665.0 - 6665.0 | 0.623 |
| Power Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration,enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.58 W/kg respectively. This device supports 20, 40, 80,160, and 320 MHz BW modes. This module is approved in portable configurations with PIFA reference antenna (4.88 to5.02 dBi) at 45mm minimum test separation distance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application xhAzMt7t03JOQgMSr4n9Iw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi New Taipei City, 221 Taiwan |
Date of Grant: 02/20/2024 Application Dated: 02/02/2024 |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZBE200NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Intel Wi-Fi 7 BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.012 | ||
| CC EP MO | 15E | 5965.0 - 7085.0 | 0.025 | ||
| CC EP MO | 15E | 5985.0 - 7025.0 | 0.049 | ||
| CC EP MO | 15E | 6025.0 - 6985.0 | 0.093 | ||
| CC EP MO | 15E | 6105.0 - 6905.0 | 0.163 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.57 | ||
| CC EP MO | 15E | 5965.0 - 6405.0 | 0.962 | ||
| CC EP MO | 15E | 5985.0 - 6385.0 | 0.907 | ||
| CC EP MO | 15E | 6025.0 - 6345.0 | 0.712 | ||
| CC EP MO | 15E | 6105.0 - 6265.0 | 0.35 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.568 | ||
| CC EP MO | 15E | 6565.0 - 6845.0 | 0.956 | ||
| CC EP MO | 15E | 6625.0 - 6785.0 | 0.802 | ||
| CC EP MO | 15E | 6665.0 - 6665.0 | 0.623 |
| Power Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration,enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.58 W/kg respectively. This device supports 20, 40, 80,160, and 320 MHz BW modes. This module is approved in portable configurations with PIFA reference antenna (4.88 to5.02 dBi) at 45mm minimum test separation distance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/20/2024 Application Dated: 02/02/2024 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZBE200NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Wi-Fi 7 BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
EAS Grant - Application pOWNkZ5eC631ske9CJLNQQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi New Taipei City, 221 Taiwan |
Date of Grant: 02/20/2024 Application Dated: 02/02/2024 |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZBE200NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Intel Wi-Fi 7 BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15B | - |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 09/24/2024 Application Dated: 09/20/2024 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZBE200NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Intel Wi-Fi 7 BE200 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.012 | ||
| CC EP MO | 15E | 5965.0 - 7085.0 | 0.025 | ||
| CC EP MO | 15E | 5985.0 - 7025.0 | 0.049 | ||
| CC EP MO | 15E | 6025.0 - 6985.0 | 0.093 | ||
| CC EP MO | 15E | 6105.0 - 6905.0 | 0.163 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.57 | ||
| CC EP MO | 15E | 5965.0 - 6405.0 | 0.962 | ||
| CC EP MO | 15E | 5985.0 - 6385.0 | 0.907 | ||
| CC EP MO | 15E | 6025.0 - 6345.0 | 0.712 | ||
| CC EP MO | 15E | 6105.0 - 6265.0 | 0.35 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.568 | ||
| CC EP MO | 15E | 6565.0 - 6845.0 | 0.956 | ||
| CC EP MO | 15E | 6625.0 - 6785.0 | 0.802 | ||
| CC EP MO | 15E | 6665.0 - 6665.0 | 0.623 |
| Power Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.58 W/kg respectively. This device supports 20, 40, 80,160, and 320 MHz BW modes. This module is approved in portable configurations with PIFA reference antenna (4.88 to5.02 dBi) at 45 mm minimum test separation distance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi. Class II Permissive Change: Authorizes portable use when integrated into the Acer Model N24Q1 Notebook Computer. The highest reported SAR values for body and simultaneous transmission use conditions are 0.64 W/kg and 1.49 W/kg, respectively. The highest reported power density is 7.78 W/m2. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application PgSmSG5H2S4Q8yZgkWRnGw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi New Taipei City, 221 Taiwan |
Date of Grant: 09/24/2024 Application Dated: 09/20/2024 |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZBE200NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | 15E 6 GHz Low Power Dual Client |
| Notes: | Intel Wi-Fi 7 BE200 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC EP MO | 15E | 5955.0 - 7115.0 | 0.012 | ||
| CC EP MO | 15E | 5965.0 - 7085.0 | 0.025 | ||
| CC EP MO | 15E | 5985.0 - 7025.0 | 0.049 | ||
| CC EP MO | 15E | 6025.0 - 6985.0 | 0.093 | ||
| CC EP MO | 15E | 6105.0 - 6905.0 | 0.163 | ||
| CC EP MO | 15E | 5955.0 - 6415.0 | 0.57 | ||
| CC EP MO | 15E | 5965.0 - 6405.0 | 0.962 | ||
| CC EP MO | 15E | 5985.0 - 6385.0 | 0.907 | ||
| CC EP MO | 15E | 6025.0 - 6345.0 | 0.712 | ||
| CC EP MO | 15E | 6105.0 - 6265.0 | 0.35 | ||
| CC EP MO | 15E | 6535.0 - 6855.0 | 0.568 | ||
| CC EP MO | 15E | 6565.0 - 6845.0 | 0.956 | ||
| CC EP MO | 15E | 6625.0 - 6785.0 | 0.802 | ||
| CC EP MO | 15E | 6665.0 - 6665.0 | 0.623 |
| Power Output listed is EIRP. The first five rows above are for LPI mode and the remaining rows are for Standard mode. Modular Approval filing. Device is a 2 x 2 MIMO configuration, enabled for 6 GHz operations as described in this filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.62 W/kg and 1.58 W/kg respectively. This device supports 20, 40, 80,160, and 320 MHz BW modes. This module is approved in portable configurations with PIFA reference antenna (4.88 to5.02 dBi) at 45 mm minimum test separation distance. Power Density and SAR testing was performed to demonstrate RF exposure compliance. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (4.88 to 5.02dBi), Dipole reference antenna (4.49 to 5.02 dBi) and Monopole reference antenna (4.79 to4.91 dBi). The minimum gain approved with the UNII-5 to UNII-8 bands is -2.0 dBi. Class II Permissive Change: Authorizes portable use when integrated into the Acer Model N24Q1 Notebook Computer. The highest reported SAR values for body and simultaneous transmission use conditions are 0.64 W/kg and 1.49 W/kg, respectively. The highest reported power density is 7.78 W/m2. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 09/24/2024 Application Dated: 09/20/2024 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZBE200NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wi-Fi 7 BE200 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.028 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.998 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.997 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band-edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.45 W/kg and 1.58 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). Class II Permissive Change: Authorizes portable use when integrated into the Acer Model N24Q1 Notebook Computer. The highest reported SAR values for body and simultaneous transmission use conditions are 0.87 W/kg and 1.25 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application pESvptTNLYXnynGgBIAhRg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi New Taipei City, 221 Taiwan |
Date of Grant: 09/24/2024 Application Dated: 09/20/2024 |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZBE200NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wi-Fi 7 BE200 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.028 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.998 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.997 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band-edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.45 W/kg and 1.58 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). Class II Permissive Change: Authorizes portable use when integrated into the Acer Model N24Q1 Notebook Computer. The highest reported SAR values for body and simultaneous transmission use conditions are 0.87 W/kg and 1.25 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 09/24/2024 Application Dated: 09/20/2024 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZBE200NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wi-Fi 7 BE200 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.032 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 1.58 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). Class II Permissive Change: Authorizes portable use when integrated into the Acer Model N24Q1 Notebook Computer. The highest reported SAR values for body and simultaneous transmission use conditions are 0.37 W/kg and 1.56 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application DLnb4OPTAbqK90lmflux7g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi New Taipei City, 221 Taiwan |
Date of Grant: 09/24/2024 Application Dated: 09/20/2024 |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZBE200NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wi-Fi 7 BE200 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.032 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 1.58 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi), Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). Class II Permissive Change: Authorizes portable use when integrated into the Acer Model N24Q1 Notebook Computer. The highest reported SAR values for body and simultaneous transmission use conditions are 0.37 W/kg and 1.56 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/20/2024 Application Dated: 02/02/2024 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZBE200NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wi-Fi 7 BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.028 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.998 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.997 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band-edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter,except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described inthis filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.45 W/kg and 1.58 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi)at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi),Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application CbOdgST40gpnyQrDNvVgEA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi New Taipei City, 221 Taiwan |
Date of Grant: 02/20/2024 Application Dated: 02/02/2024 |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZBE200NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Digital Transmission System |
| Notes: | Intel Wi-Fi 7 BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.028 | ||
| CC MO | 15C | 2412.0 - 2472.0 | 0.998 | ||
| CC MO | 15C | 2422.0 - 2462.0 | 0.997 |
| Power Output listed is conducted. Modular Approval. Power output has been reduced at the upper band-edge channels as shown in filings under this FCC ID. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter,except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may beused with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 Supplement documentation. When all conditions of this filing cannot be met installation of this deviceinto specific final products may require the submission of a permissive change application,containing appropriate data demonstrating compliance, or a new application. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. Device is a client only device containing a 2x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described inthis filing. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.45 W/kg and 1.58 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi)at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi),Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Kiwa Nederland B.V. Wilmersdorf 50 Apeldoorn, NL-7300 AC Netherlands |
Date of Grant: 02/20/2024 Application Dated: 02/02/2024 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZBE200NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wi-Fi 7 BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.032 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 1.58 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi)at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi),Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application c+Q+91+hNdAHo9o6vUOLTw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi New Taipei City, 221 Taiwan |
Date of Grant: 02/20/2024 Application Dated: 02/02/2024 |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZBE200NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Intel Wi-Fi 7 BE200 |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.032 |
| Power Output listed is conducted. Modular Approval filing. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, exceptin accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equalor lesser gain may be used with this transmitter. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. The highest reported Body and Simultaneous SAR values are 0.05 W/kg and 1.58 W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (2.95 dBi)at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (2.95 dBi),Dipole reference antenna (2.95 dBi) and Monopole reference antenna (2.83 dBi). |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 13146 NW 86th Drive Suite 400 Alachua, FL 32615 |
Date of Grant: 09/24/2024 Application Dated: 09/20/2024 |
| Acer Incorporated |
| 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi |
| New Taipei City, 221 Taiwan |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZBE200NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wi-Fi 7 BE200 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.151 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.224 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.138 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.097 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.227 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.142 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.15 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.227 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.224 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.136 | ||
| CC MO ND | 15E | 5690.0 - 5690.0 | 0.249 | ||
| CC MO ND | 15E | 5530.0 - 5610.0 | 0.223 | ||
| CC MO ND | 15E | 5570.0 - 5570.0 | 0.154 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.433 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.413 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.234 | ||
| CC EP MO | 15E | 5845.0 - 5885.0 | 0.327 | ||
| CC EP MO | 15E | 5835.0 - 5875.0 | 0.708 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.731 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.37 |
| Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.77 W/kg and 1.58W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (5.11 to5.15 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to4.95 dBi). Class II Permissive Change: Authorizes portable use when integrated into the Acer Model N24Q1 Notebook Computer. The highest reported SAR values for body and simultaneous transmission use conditions are 1.19 W/kg and 1.56 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application BwlelHp0RPPUIIvFUJe37g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd. Xizhi New Taipei City, 221 Taiwan |
Date of Grant: 09/24/2024 Application Dated: 09/20/2024 |
| Attention: RU Jan , Sr. Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | HLZBE200NG |
| Name of Grantee: | Acer Incorporated |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Intel Wi-Fi 7 BE200 |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.151 | ||
| CC MO | 15E | 5190.0 - 5230.0 | 0.224 | ||
| CC MO | 15E | 5210.0 - 5210.0 | 0.138 | ||
| CC MO ND | 15E | 5250.0 - 5250.0 | 0.097 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.148 | ||
| CC MO ND | 15E | 5270.0 - 5310.0 | 0.227 | ||
| CC MO ND | 15E | 5290.0 - 5290.0 | 0.142 | ||
| CC MO ND | 15E | 5500.0 - 5700.0 | 0.15 | ||
| CC MO ND | 15E | 5510.0 - 5670.0 | 0.227 | ||
| CC MO ND | 15E | 5710.0 - 5710.0 | 0.224 | ||
| CC MO ND | 15E | 5720.0 - 5720.0 | 0.136 | ||
| CC MO ND | 15E | 5690.0 - 5690.0 | 0.249 | ||
| CC MO ND | 15E | 5530.0 - 5610.0 | 0.223 | ||
| CC MO ND | 15E | 5570.0 - 5570.0 | 0.154 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.433 | ||
| CC MO | 15E | 5755.0 - 5795.0 | 0.413 | ||
| CC MO | 15E | 5775.0 - 5775.0 | 0.234 | ||
| CC EP MO | 15E | 5845.0 - 5885.0 | 0.327 | ||
| CC EP MO | 15E | 5835.0 - 5875.0 | 0.708 | ||
| CC EP MO | 15E | 5855.0 - 5855.0 | 0.731 | ||
| CC EP MO | 15E | 5815.0 - 5815.0 | 0.37 |
| Modular Approval. Power Output listed is conducted for UNII-1 to UNII-3 and EIRP for UNII-4 bands. UNII-4 band is for indoor operation only. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. This module is approved in mobile/portable configurations. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. Grantee must coordinate with OEM integrator to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission SAR requirements according to published KDB 616217 supplement documentation. When all conditions of this filing cannot be met installation of this device into specific final products may require the submission of a permissive change application, containing appropriate data demonstrating compliance, or a new application. This transmitter has 20MHz, 40MHz, 80MHz, 160 MHz bandwidth modes as described in this filing. Device is a client only device containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. OEM/Host integrator must be provided with antenna installation instructions and transmitter operating conditions to satisfy RF exposure compliance. OEM/Host integrator is responsible for complying with the instructions and requirements for each transmitter they choose to integrate into a host product. The highest reported Body and Simultaneous SAR values are 0.77 W/kg and 1.58W/kg respectively. This module is approved in portable configurations with PIFA reference antenna (5.11 to5.15 dBi) at 43mm minimum test separation distance. SAR testing was performed to demonstrate portable RF compliance for the PIFA antenna. This filing meets MPE requirements of KDB 447498 and can be used in mobile configurations for the following reference antennas: PIFA reference antenna (5.11 to 5.15dBi), Dipole reference antenna (4.03 to 5.15 dBi) and Monopole reference antenna (4.43 to4.95 dBi). Class II Permissive Change: Authorizes portable use when integrated into the Acer Model N24Q1 Notebook Computer. The highest reported SAR values for body and simultaneous transmission use conditions are 1.19 W/kg and 1.56 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| EP: | Output power is Effective Isotropic Radiated Power (EIRP) |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |