FCC ID IR2DWW6810
EnviroMonitor Node
by Davis Instruments
Grantee Code: IR2 Product Code: DWW6810
Latest application date: 2016-02-08
FCC ID Device Details
| FCC ID | IR2DWW6810 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | IR2 |
| Product Code | DWW6810 |
| Applicant Business | Davis Instruments 🇺🇸 |
| Related Domains | |
| Equipment Class | EnviroMonitor Node |
| Test Firm | CKC Laboratories, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2016-02-08 |
| 902.5-927 MHz | Original Equipment | 2016-02-08 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual | Users Manual | 2016-08-06 | PDF 1.9 MB |
| Internal Photos | Internal Photos | 2016-08-06 | PDF 1.4 MB |
| External Photos | External Photos | 2016-08-06 | PDF 553 KB |
| ID Label Location | ID Label/Location Info | 2016-02-08 | PDF 204.9 KB |
| ID Label and Location Justification | ID Label/Location Info | 2016-02-08 | PDF 6.4 KB |
| ID Label and Location justification | ID Label/Location Info | 2016-02-08 | PDF 6.4 KB |
| Test Setup Photos | Test Setup Photos | 2016-08-06 | PDF 640.8 KB |
| Test Setup Photos 2 | Test Setup Photos | 2016-08-06 | PDF 710.1 KB |
| Test Report | Test Report | 2016-02-08 | PDF 2 MB |
| Test Report | Test Report | 2016-02-08 | PDF 1.9 MB |
| Anti-Drug Letter | Cover Letter(s) | 2016-02-08 | PDF 22.4 KB |
| Authorization Letter | Cover Letter(s) | 2016-02-08 | PDF 16.9 KB |
| Authorization Letter-Individual | Cover Letter(s) | 2016-02-08 | PDF 117.1 KB |
| Confidentiality Request | Cover Letter(s) | 2016-02-08 | PDF 56.1 KB |
| Confidentiality Request- Temp. | Cover Letter(s) | 2016-02-08 | PDF 159.2 KB |
| RF Exposure | RF Exposure Info | 2016-02-08 | PDF 808 KB |
| Block Diagram Metadata only | Block Diagram | PDF 133.5 KB | |
| Schematics Metadata only | Schematics | PDF 78.5 KB | |
| Schematics 1 Metadata only | Schematics | PDF 936.6 KB | |
| Schematics 2 Metadata only | Schematics | PDF 81.9 KB | |
| Schematics 2 Metadata only | Schematics | PDF 936.6 KB | |
| Schematics 3 Metadata only | Schematics | PDF 143.1 KB | |
| Schematics 3 Metadata only | Schematics | PDF 81.9 KB | |
| Schematics 4 Metadata only | Schematics | PDF 78.5 KB | |
| Schematics 4 Metadata only | Schematics | PDF 143.1 KB | |
| Calibration Procedure Metadata only | Operational Description | PDF 22.6 KB | |
| Operational Description Metadata only | Operational Description | PDF 19.3 KB |
Application Information
| Application ID | BHBf3ooKPkN8qAPbFVjzmg== |
|---|---|
| Final Action Date | 2016-02-08 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0006861777 |
| Model | DWW6810 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | EnviroMonitor Node |
| Responsible Party | Bruce Walter, Sr Design Engineer, brucew@davisinstruments.com |
| Agent | Michelle Michelle Michelle, CKC Certification Services, LLC, info@ckccertification.com |
| Non-Technical Contact | Jeremiah Jeffress, Davis Instruments, jeremiahh@davisnet.com |
| Test Firm | Steve Behm, CKC Laboratories, Inc., steve.behm@ckc.com |
| TCB Email | info@ckccertification.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 08/06/2016 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power listed is conducted The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for used with antenna(s) as listed in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| BHBf3ooKPkN8qAPbFVjzmg== | 2016-02-08 | Original Equipment |
| AYEbvCQh6qjVk8D1Hly5ow== | 2016-02-08 | Original Equipment |
Grants
TCB Grant - Application BHBf3ooKPkN8qAPbFVjzmg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 02/08/2016 Application Dated: 01/14/2016 |
| Davis Instruments |
| 3465 Diablo Avenue |
| Hayward, CA 94545 |
| Attention: Bruce Walter , Sr Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IR2DWW6810 |
| Name of Grantee: | Davis Instruments |
| Equipment Class: | Digital Transmission System |
| Notes: | EnviroMonitor Node |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00729 |
| Power listed is conducted The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for used with antenna(s) as listed in this filing. |
EAS Grant - Application BHBf3ooKPkN8qAPbFVjzmg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Davis Instruments 3465 Diablo Avenue Hayward, CA 94545 United States |
Date of Grant: 02/08/2016 Application Dated: 01/14/2016 |
| Attention: Bruce Walter , Sr Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IR2DWW6810 |
| Name of Grantee: | Davis Instruments |
| Equipment Class: | Digital Transmission System |
| Notes: | EnviroMonitor Node |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.00729 |
| Power listed is conducted The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for used with antenna(s) as listed in this filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
CKC Certification Services, LLC 5046 Sierra Pines Mariposa, CA 95338 |
Date of Grant: 02/08/2016 Application Dated: 01/14/2016 |
| Davis Instruments |
| 3465 Diablo Avenue |
| Hayward, CA 94545 |
| Attention: Bruce Walter , Sr Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IR2DWW6810 |
| Name of Grantee: | Davis Instruments |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | EnviroMonitor Node |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.5 - 927.0 | 0.01726 |
| Power listed is conducted The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for used with antenna(s) as listed in this filing. |
EAS Grant - Application AYEbvCQh6qjVk8D1Hly5ow==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Davis Instruments 3465 Diablo Avenue Hayward, CA 94545 United States |
Date of Grant: 02/08/2016 Application Dated: 01/14/2016 |
| Attention: Bruce Walter , Sr Design Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | IR2DWW6810 |
| Name of Grantee: | Davis Instruments |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | EnviroMonitor Node |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.5 - 927.0 | 0.01726 |
| Power listed is conducted The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. End Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Approved for used with antenna(s) as listed in this filing. |
| Mail To: |